Dynamic Characteristics of Externally Pressurized Rectangular Porous Gas Thrust Bearings

1976 ◽  
Vol 98 (1) ◽  
pp. 181-186 ◽  
Author(s):  
B. C. Majumdar
Keyword(s):  
Design Procedure ◽  
Theoretical Data ◽  
Periodic Load ◽  
Small Perturbations ◽  
Thrust Bearings ◽  
Design Variables ◽  
Wide Range ◽  
Stiffness And Damping ◽  
Compressible Lubricant

A theoretical study on the behavior of an externally pressurized rectangular porous thrust bearing is made using compressible lubricant. A periodic load is imposed on the bearing and the pressure distribution which leads to the determination of stiffness and damping is obtained by small perturbations. The results are calculated numerically using a digital computer. The tabulated theoretical data of a square pad given for a wide range of design variables enable one to use directly in the design. A design procedure of such a bearing is also indicated.

Dynamic Characteristics of an Inherently Compensated, Square, Gas Film Bearing

1975 ◽  
Vol 97 (1) ◽  
pp. 52-62 ◽  
Author(s):  
A. K. Stiffler ◽  
D. M. Smith
Keyword(s):  
Numerical Methods ◽  
Design Methodology ◽  
Reynolds Equation ◽  
Load Capacity ◽  
Dynamic Pressure ◽  
External Pressure ◽  
Periodic Load ◽  
Small Perturbations ◽  
Squeeze Number ◽  
Stiffness And Damping

A rectangular gas film bearing with inherently compensated feedholes evenly distributed around the interior is analyzed. The feedhole boundary between the enclosed central region and the exterior perimeter region is modeled as a line source. A periodic load disturbance is imposed on the externally pressurized bearing, and the dynamic pressure distribution is determined by small perturbations of the Reynolds’ equation. The solution for the square bearing is obtained by numerical methods. Design curves are presented for the load capacity, mass flow, stiffness, and damping as a function of squeeze number, external pressure, restrictor coefficient, and source location. A design methodology is presented.

Analysis of the Stiffness and Damping of an Inherently Compensated, Multiple-Inlet, Circular Thrust Bearing

1974 ◽  
Vol 96 (3) ◽  
pp. 329-336 ◽  
Author(s):  
A. K. Stiffler
Keyword(s):  
Reynolds Equation ◽  
Thrust Bearing ◽  
Dynamic Pressure ◽  
External Pressure ◽  
Periodic Load ◽  
Small Perturbations ◽  
Central Disk ◽  
Squeeze Number ◽  
Stiffness And Damping ◽  
Disk Region

A circular thrust bearing with inherently compensated feedholes evenly distributed around an interior radius is analyzed. The feedhole boundary between the central disk region and exterior annular region is modeled as a line source. A periodic load disturbance is imposed on the bearing, and the dynamic pressure distribution is determined by small perturbations of the Reynolds equation. The solution is given in terms of Kelvin functions. Design curves are presented for the stiffness and damping as a function of squeeze number, external pressure, restrictor coefficient and feedhole location.

Dynamic Characteristics of Aerostatic Thrust Bearings with Porous Inserts

1980 ◽  
Vol 22 (2) ◽  
pp. 55-58 ◽  
Author(s):  
B. C. Majumdar
Keyword(s):  
Perturbation Method ◽  
Dynamic Characteristics ◽  
Dynamic Behaviour ◽  
Thrust Bearing ◽  
Thrust Bearings ◽  
First Order ◽  
Design Variables ◽  
Stiffness And Damping ◽  
Film Stiffness ◽  
First Order Perturbation

A first-order perturbation method is adopted to find the dynamic behaviour of an aerostatic circular thrust bearing having a central porous insert as a restrictor. The linearized gas film stiffness and damping are derived and used to study their behaviour with other design variables.

INFLUENCE OF PAD GEOMETRY MODIFICATION ON THE PERFORMANCE OF THRUST BEARINGS LUBRICATED WITH MAGNETORHEOLOGICAL FLUID

Tribologia ◽  
2018 ◽  
Vol 278 (2) ◽  
pp. 29-35 ◽  
Author(s):  
Wojciech HORAK ◽  
Marcin SZCZĘCH ◽  
Józef SALWIŃSKI
Keyword(s):  
Sliding Friction ◽  
Experimental Tests ◽  
Magnetic Fluids ◽  
Performance Parameters ◽  
System Operation ◽  
Precise Control ◽  
Thrust Bearings ◽  
Wide Range ◽  
The Magnetic Field

Magnetic fluids belong to the class of controllable materials. The influence of magnetic fields on this type of substance results in a change in its internal structure and an almost immediate change in its rheological properties. The ability to control the rheological characteristics in a very wide range, in combination with the ease of generating and controlling the magnetic field, creates the possibility of using this type of substance in systems with controlled operating parameters. The use of magnetic fluids in bearings may allow the design of some types of bearings to be simplified and enable efficient, fast, and precise control of the system operation, with a much shorter response time and higher stiffness than is the case with conventional sliding friction bearings. The paper presents the results of experimental tests carried out on a laboratory stand designed for thrust bearings lubricated with magnetic fluids. The analyses carried out concerned the determination of how the pad surface modification of the slide bearing, lubricated with magnetorheological fluids, influences the system performance parameters.

DINAMIKA POLITIK PERSETUJUAN BERSAMA TENTANG PENETAPAN DESA ADAT DI KABUPATEN ROKAN HULU TAHUN 2014

2017 ◽  
Vol 15 (1) ◽  
pp. 21
Author(s):  
Haryo Suganda ◽  
Raja Muhammad Amin
Keyword(s):  
Regulatory Region ◽  
Field Research ◽  
Analysis Techniques ◽  
Political Dynamics ◽  
Political Interests ◽  
Wide Range ◽  
Information Method ◽  
Qualitative Descriptive ◽  
The Village

This study is motivated the identification of policies issued by the regional Governmentof Rokan Hulu in the form of Regulatory region number 1 by 2015 on the determination of thevillage and Indigenous Village. Political dynamics based on various interests against themanufacture of, and decision-making in the process of formation of the corresponding localregulations determination of Indigenous Villages in the Rokan Hulu is impacted to a verysignificantamount of changes from the initial draft of the number i.e. 21 (twenty one) the villagebecame Customary 89 (eighty-nine) the Indigenous Villages who have passed. Type of thisresearch is a qualitative descriptive data analysis techniques. The research aims to describe theState of the real situation in a systematic and accurate fact analysis unit or related research, aswell as observations of the field based on the data (information). Method of data collectionwas done with interviews, documentation, and observations through fieldwork (field research).The results of the research on the process of discussion of the draft local regulations andmutual agreement about Designation of Indigenous Villages in the Rokan Hulu is, showed thatthe political dynamics that occur due to the presence of various political interests, rejectionorally by Villagers who were judged to have met the requirements of Draft Regulations to beformulated and the area for the set to be Indigenous Villages, and also there is a desire fromsome villages in the yet to Draft local regulations in order to set the Indigenous village , there isa wide range of interests of these aspects influenced the agreement to assign the entire localVillage which is in the Rokan Hulu become Indigenous village, and the village of Transmigrationinto administrative Villages where the initiator of the changes in the number of IndigenousVillages in the Rokan Hulu it is the desire of the local Government of its own.

scholarly journals Recent Developments in the Determination of Biomarkers of Tobacco Smoke Exposure in Biological Specimens: A Review

2021 ◽  
Vol 18 (4) ◽  
pp. 1768
Author(s):  
Hernâni Marques ◽  
Pedro Cruz-Vicente ◽  
Tiago Rosado ◽  
Mário Barroso ◽  
Luís A. Passarinha ◽  
...  
Keyword(s):  
Tobacco Smoke ◽  
Solid Phase ◽  
Smoke Exposure ◽  
Tobacco Smoke Exposure ◽  
World Health ◽  
Second Hand Smoke ◽  
Tobacco Exposure ◽  
Wide Range ◽  
Recent Developments

Environmental tobacco smoke exposure (ETS) and smoking have been described as the most prevalent factors in the development of certain diseases worldwide. According to the World Health Organization, more than 8 million people die every year due to exposure to tobacco, around 7 million due to direct ETS and the remaining due to exposure to second-hand smoke. Both active and second-hand exposure can be measured and controlled using specific biomarkers of tobacco and its derivatives, allowing the development of more efficient public health policies. Exposure to these compounds can be measured using different methods (involving for instance liquid- or gas-chromatographic procedures) in a wide range of biological specimens to estimate the type and degree of tobacco exposure. In recent years, a lot of research has been carried out using different extraction methods and different analytical equipment; this way, liquid–liquid extraction, solid-phase extraction or even miniaturized procedures have been used, followed by chromatographic analysis coupled mainly to mass spectrometric detection. Through this type of methodologies, second-hand smokers can be distinguished from active smokers, and this is also valid for e-cigarettes and vapers, among others, using their specific biomarkers. This review will focus on recent developments in the determination of tobacco smoke biomarkers, including nicotine and other tobacco alkaloids, specific nitrosamines, polycyclic aromatic hydrocarbons, etc. The methods for their detection will be discussed in detail, as well as the potential use of threshold values to distinguish between types of exposure.

scholarly journals Applicability of Cork as Novel Modifiers to Develop Electrochemical Sensor for Caffeine Determination

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 37
Author(s):  
Mayra K. S. Monteiro ◽  
Djalma R. Da Silva ◽  
Marco A. Quiroz ◽  
Vítor J. P. Vilar ◽  
Carlos A. Martínez-Huitle ◽  
...  
Keyword(s):  
Electrochemical Sensor ◽  
Linear Response ◽  
High Performance ◽  
Low Cost ◽  
Pharmaceutical Formulations ◽  
Caffeine Concentration ◽  
Real Samples ◽  
Wide Range ◽  
Potential Use

This study aims to investigate the applicability of a hybrid electrochemical sensor composed of cork and graphite (Gr) for detecting caffeine in aqueous solutions. Raw cork (RAC) and regranulated cork (RGC, obtained by thermal treatment of RAC with steam at 380 °C) were tested as modifiers. The results clearly showed that the cork-graphite sensors, GrRAC and GrRGC, exhibited a linear response over a wide range of caffeine concentration (5–1000 µM), with R2 of 0.99 and 0.98, respectively. The limits of detection (LOD), estimated at 2.9 and 6.1 µM for GrRAC and GrRGC, suggest greater sensitivity and reproducibility than the unmodified conventional graphite sensor. The low-cost cork-graphite sensors were successfully applied in the determination of caffeine in soft drinks and pharmaceutical formulations, presenting well-defined current signals when analyzing real samples. When comparing electrochemical determinations and high performance liquid chromatography measurements, no significant differences were observed (mean accuracy 3.0%), highlighting the potential use of these sensors to determine caffeine in different samples.

scholarly journals Differential Laboratory Diagnosis of Acute Fever in Guinea: Preparedness for the Threat of Hemorrhagic Fevers

2021 ◽  
Vol 18 (11) ◽  
pp. 6022
Author(s):  
Vladimir G. Dedkov ◽  
N’Faly Magassouba ◽  
Olga A. Stukolova ◽  
Victoria A. Savina ◽  
Jakob Camara ◽  
...  
Keyword(s):  
Ebola Virus ◽  
Febrile Illness ◽  
Laboratory Diagnosis ◽  
Acute Febrile Illness ◽  
Causative Pathogen ◽  
Hemorrhagic Fevers ◽  
Wide Range ◽  
Causative Agents ◽  
Pathognomonic Sign

Acute febrile illnesses occur frequently in Guinea. Acute fever itself is not a unique, hallmark indication (pathognomonic sign) of any one illness or disease. In the infectious disease context, fever’s underlying cause can be a wide range of viral or bacterial pathogens, including the Ebola virus. In this study, molecular and serological methods were used to analyze samples from patients hospitalized with acute febrile illness in various regions of Guinea. This analysis was undertaken with the goal of accomplishing differential diagnosis (determination of causative pathogen) in such cases. As a result, a number of pathogens, both viral and bacterial, were identified in Guinea as causative agents behind acute febrile illness. In approximately 60% of the studied samples, however, a definitive determination could not be made.

scholarly journals Strength Analysis of Alternative Airframe Layouts of Regional Aircraft on the Basis of Automated Parametrical Models

Aerospace ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 80
Author(s):  
Dmitry V. Vedernikov ◽  
Alexander N. Shanygin ◽  
Yury S. Mirgorodsky ◽  
Mikhail D. Levchenkov
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
High Performance ◽  
Strength Analysis ◽  
Labor Input ◽  
Aerodynamic Loading ◽  
Aspect Ratios ◽  
Wide Range ◽  
Parametrical Design

This publication presents the results of complex parametrical strength investigations of typical wings for regional aircrafts obtained by means of the new version of the four-level algorithm (FLA) with the modified module responsible for the analysis of aerodynamic loading. This version of FLA, as well as a base one, is focused on significant decreasing time and labor input of a complex strength analysis of airframes by using simultaneously different principles of decomposition. The base version includes four-level decomposition of airframe and decomposition of strength tasks. The new one realizes additional decomposition of alternative variants of load cases during the process of determination of critical load cases. Such an algorithm is very suitable for strength analysis and designing airframes of regional aircrafts having a wide range of aerodynamic concepts. Results of validation of the new version of FLA for a high-aspect-ratio wing obtained in this work confirmed high performance of the algorithm in decreasing time and labor input of strength analysis of airframes at the preliminary stages of designing. During parametrical design investigation, some interesting results for strut-braced wings having high aspect ratios were obtained.

scholarly journals Validation of an HPLC–MS/MS Method for the Determination of Plasma Ticagrelor and Its Active Metabolite Useful for Research and Clinical Practice

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 278
Author(s):  
Jennifer Lagoutte-Renosi ◽  
Bernard Royer ◽  
Vahideh Rabani ◽  
Siamak Davani
Keyword(s):  
Active Metabolite ◽  
Plasma Concentrations ◽  
Antiplatelet Agent ◽  
High Plasma ◽  
Therapeutic Drug ◽  
Routine Practice ◽  
Daily Routine ◽  
Limit Of Quantification ◽  
Wide Range

Ticagrelor is an antiplatelet agent which is extensively metabolized in an active metabolite: AR-C124910XX. Ticagrelor antagonizes P2Y12 receptors, but recently, this effect on the central nervous system has been linked to the development of dyspnea. Ticagrelor-related dyspnea has been linked to persistently high plasma concentrations of ticagrelor. Therefore, there is a need to develop a simple, rapid, and sensitive method for simultaneous determination of ticagrelor and its active metabolite in human plasma to further investigate the link between concentrations of ticagrelor, its active metabolite, and side effects in routine practice. We present here a new method of quantifying both molecules, suitable for routine practice, validated according to the latest Food and Drug Administration (FDA) guidelines, with a good accuracy and precision (<15% respectively), except for the lower limit of quantification (<20%). We further describe its successful application to plasma samples for a population pharmacokinetics study. The simplicity and rapidity, the wide range of the calibration curve (2–5000 µg/L for ticagrelor and its metabolite), and high throughput make a broad spectrum of applications possible for our method, which can easily be implemented for research, or in daily routine practice such as therapeutic drug monitoring to prevent overdosage and occurrence of adverse events in patients.

Sign in / Sign up

Export Citation Format

Share Document