Motion of a Small High-Speed Rotor in 3 Types of Foil Bearings

1975 ◽  
Vol 97 (2) ◽  
pp. 270-280 ◽  
Author(s):  
L. Licht ◽  
M. Branger
Keyword(s):  
High Speed ◽  
Modular Construction ◽  
Foil Bearings ◽  
Preliminary Examination ◽  
Experimental Apparatus ◽  
Rotor Axis

Experiments are conducted with 3 types of oilless (air lubricated) foil bearings and a small rotor, at speeds up to and in excess of 3,500 rps (210,000 rpm). The modular construction of the experimental apparatus provides for interchangeability of foil retainers in the supporting brackets, for their alignment, and for the positioning of bearings at various stations along the rotor axis. The symmetrical rotor, 12.7 cm (5.0 in.) long and weighing 2.97 N (0.667 lb) has both cylindrical and conical journals. The main purpose of the investigation is a preliminary examination of whirl-suppressing (stabilizing) characteristics of these flexible bearings, with the objective of application to small high-speed turbomachines.

Dynamic Characteristics of a High-Speed Rotor With Radial and Axial Foil-Bearing Supports

1981 ◽  
Vol 103 (3) ◽  
pp. 361-370 ◽  
Author(s):  
L. Licht ◽  
W. J. Anderson ◽  
S. W. Doroff
Keyword(s):  
Support System ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Journal Bearing ◽  
Foil Bearings ◽  
Flexible Support ◽  
Foil Bearing ◽  
Experimental Apparatus ◽  
Asymmetric Rotor

An asymmetric rotor (19N; 4.3 lb), supported radially and axially by compliant bearings (foil bearings), is subjected to severe excitation by rotating unbalance (43 μm.N; 6100 μin.oz) in the “pitching” mode, at speeds to 50,000 rpm. The resilient, air-lubricated bearings provide very effective damping, so that regions of resonance and instability can be traversed with impunity, with amplitudes and limit-trajectories remaining within acceptable bounds. A novel journal bearing is introduced, in which a resilient support is furnished by the outer turn of the coiled foil-element, initially bent to form an open polygon. The experimental apparatus and procedure are described, and the response of the rotor and flexible support system are copiously documented by oscilloscope records of motion.

The Numerical Calculation of Static Performance of Multi Wound Foil Bearing and Experimental Validation

2007 ◽  
Author(s):  
Kai Feng ◽  
Shigehiko Kaneko
Keyword(s):  
Numerical Calculation ◽  
High Speed ◽  
Load Capacity ◽  
Convergence Criterion ◽  
Operation Condition ◽  
Foil Bearings ◽  
Deformation Equation ◽  
Experimental Apparatus ◽  
Calculation Results ◽  
Static Performance

Multi wound foil bearings (MWFB), as a kind of foil bearings with simple structures, are supposed to be one of the best candidates of supporting component for turbo-machineries because of their design simplicity, reduced weight and size, high speed and temperature capability, and easy maintenance. In this study, a theoretical model of MWFB taking account of the effect of the foil deformation is developed to predict its static performance. Reynolds’ equation is solved using Finite Difference Method (FDM) to yield air pressure distribution, while the elastic deformation equation is solved by Finite Element Method (FEM) to predict the deformation of the foil. Then, the above two equations are coupled by several iterations until the convergence criterion is reached. Based on the calculations, static characteristics of MWFB such as film thickness, load capacity and torque are presented. Finally, an experimental apparatus is built up to measure the load of MWFB at different operation condition, which are used to validate numerical calculation results.

Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions

2006 ◽  
Vol 129 (3) ◽  
pp. 850-857 ◽  
Author(s):  
Luis San Andrés ◽  
Dario Rubio ◽  
Tae Ho Kim
Keyword(s):  
High Speed ◽  
Critical Speed ◽  
Load Capacity ◽  
Test System ◽  
Foil Bearings ◽  
Rotor Imbalance ◽  
Synchronous Motion ◽  
Damping Characteristics ◽  
Rotor Surface ◽  
Stiffness And Damping

Gas foil bearings (GFBs) satisfy the requirements for oil-free turbomachinery, i.e., simple construction and ensuring low drag friction and reliable high speed operation. However, GFBs have a limited load capacity and minimal damping, as well as frequency and amplitude dependent stiffness and damping characteristics. This paper provides experimental results of the rotordynamic performance of a small rotor supported on two bump-type GFBs of length and diameter equal to 38.10mm. Coast down rotor responses from 25krpm to rest are recorded for various imbalance conditions and increasing air feed pressures. The peak amplitudes of rotor synchronous motion at the system critical speed are not proportional to the imbalance introduced. Furthermore, for the largest imbalance, the test system shows subsynchronous motions from 20.5krpm to 15krpm with a whirl frequency at ∼50% of shaft speed. Rotor imbalance exacerbates the severity of subsynchronous motions, thus denoting a forced nonlinearity in the GFBs. The rotor dynamic analysis with calculated GFB force coefficients predicts a critical speed at 8.5krpm, as in the experiments; and importantly enough, unstable operation in the same speed range as the test results for the largest imbalance. Predicted imbalance responses do not agree with the rotor measurements while crossing the critical speed, except for the lowest imbalance case. Gas pressurization through the bearings’ side ameliorates rotor subsynchronous motions and reduces the peak amplitudes at the critical speed. Posttest inspection reveal wear spots on the top foils and rotor surface.

An experimental investigation of a microturbine simulated rotor supported on multileaf gas foil bearings with backing bump foils

2017 ◽  
Vol 232 (9) ◽  
pp. 1169-1180 ◽  
Author(s):  
Bo Zhang ◽  
Shemiao Qi ◽  
Sheng Feng ◽  
Haipeng Geng ◽  
Yanhua Sun ◽  
...  
Keyword(s):  
High Speed ◽  
Preliminary Test ◽  
Journal Bearings ◽  
Rotating Machinery ◽  
System Stability ◽  
Test Rig ◽  
Thrust Bearings ◽  
Foil Bearings ◽  
Simulated System ◽  
First Time

Two multileaf gas foil journal bearings with backing bump foils and one set of gas foil thrust bearings were designed, fabricated, and used in a 100 kW class microturbine simulated rotor system to ensure stability of the system. Meanwhile, a preliminary test rig had been built to verify the simulated system stability. The rotor synchronous and subsynchronous responses were well controlled by using of the gas foil bearings. It is on the multileaf gas foil bearings with backing bump foils that the test was conducted and verified for the first time in open literatures. The success in the experiments shows that the design and fabrication of the rotor and the gas foil bearings can provide a useful guide to the development of the advanced high speed rotating machinery.

Analysis of high speed permanent magnet synchronous motor rotor supported by air foil bearings

2019 ◽  
Vol 59 (2) ◽  
pp. 755-764
Author(s):  
Hao Lin ◽  
Haipeng Geng ◽  
Tingchen Du ◽  
Xiangming Xu ◽  
Yanyan Zhang ◽  
...  
Keyword(s):  
Permanent Magnet ◽  
High Speed ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Foil Bearings

Rotordynamics Performance of Hybrid Foil Bearing Under Forced Vibration Input

2017 ◽  
Author(s):  
Daejong Kim ◽  
Brian Nicholson ◽  
Lewis Rosado ◽  
Garry Givan
Keyword(s):  
Impulse Response ◽  
High Speed ◽  
Load Capacity ◽  
Supply System ◽  
Forced Response ◽  
Experimental Results ◽  
Lateral Acceleration ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Gas Supply

Foil bearings are one type of hydrodynamic air/gas bearings but with a compliant bearing surface supported by structural material that provides stiffness and damping to the bearing. The hybrid foil bearing (HFB) in this paper is a combination of a traditional hydrodynamic foil bearing with externally-pressurized air/gas supply system to enhance load capacity during the start and to improve thermal stability of the bearing. The HFB is more suitable for relatively large and heavy rotors where rotor weight is comparable to the load capacity of the bearing at full speed and extra air/gas supply system is not a major added cost. With 4,448N∼22,240N thrust class turbine aircraft engines in mind, the test rotor is supported by HFB in one end and duplex rolling element bearings in the other end. This paper presents experimental work on HFB with diameter of 102mm performed at the US Air force Research Laboratory. Experimental works include: measurement of impulse response of the bearing to the external load corresponding to rotor’s lateral acceleration of 5.55g, forced response to external subsynchronous excitation, and high speed imbalance response. A non-linear rotordynamic simulation model was also applied to predict the impulse response and forced subsynchronous response. The simulation results agree well with experimental results. Based on the experimental results and subsequent simulations, an improved HFB design is also suggested for higher impulse load capability up to 10g and rotordynamics stability up to 30,000rpm under subsynchronous excitation.

Rotordynamic Performance of a Shaft With Large Overhung Mass Supported by Foil Bearings

2016 ◽  
Vol 139 (4) ◽  
Author(s):  
Nguyen LaTray ◽  
Daejong Kim
Keyword(s):  
High Speed ◽  
Foil Bearings ◽  
Speed Test ◽  
Foil Bearing ◽  
Stable Conditions ◽  
Bending Mode ◽  
Mode Vibration ◽  
Lift Off ◽  
Compact Design ◽  
Bearing System

This work presents the theoretical and experimental rotordynamic evaluations of a rotor–air foil bearing (AFB) system supporting a large overhung mass for high-speed application. The proposed system highlights the compact design of a single shaft rotor configuration with turbomachine components arranged on one side of the bearing span. In this work, low-speed tests up to 45 krpm are performed to measure lift-off speed and to check bearing manufacturing quality. Rotordynamic performance at high speeds is evaluated both analytically and experimentally. In the analytical approach, simulated imbalance responses are studied using both rigid and flexible shaft models with bearing forces calculated from the transient Reynolds equation along with the rotor motion. The simulation predicts that the system experiences small synchronous rigid mode vibration at 20 krpm and bending mode at 200 krpm. A high-speed test rig is designed to experimentally evaluate the rotor–air foil bearing system. The high-speed tests are operated up to 160 krpm. The vibration spectrum indicates that the rotor–air foil bearing system operates under stable conditions. The experimental waterfall plots also show very small subsynchronous vibrations with frequency locked to the system natural frequency. Overall, this work demonstrates potential capability of the air foil bearings in supporting a shaft with a large overhung mass at high speed.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

scholarly journals Rotor dynamic experimental investigation of an ultra-high-speed permanent magnet synchronous motor supported on a three-pad bidirectional gas foil bearing

2019 ◽  
Vol 11 (9) ◽  
pp. 168781401987536
Author(s):  
Wenjie Cheng ◽  
Zhikai Deng ◽  
Ling Xiao ◽  
Bin Zhong ◽  
Wenbo Duan
Keyword(s):  
Permanent Magnet ◽  
High Speed ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Rotor System ◽  
Permanent Magnet Motors ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Ultra High Speed ◽  
Rotor Dynamic

With a 10-kW, 120,000-r/min, ultra-high-speed permanent magnet synchronous motor taken as a prototype, experimental research is conducted on the rotor dynamic behaviours of a three-pad bidirectional gas foil bearing high-speed motor rotor system. Load-carrying properties of the three-pad bidirectional gas foil bearing are analysed, and natural frequencies of conical and parallel whirling modes of the elastically supported rotor are calculated based on an appropriate simplification to the stiffness and damping coefficients of the gas foil bearings. The prototype passes through a 90,000-r/min coast-down experiment. Experiments show that there are violent subsynchronous whirling motions that are evoked by the gas foil bearing–rotor system itself. The cause of shaft orbit drift is analysed, and the corresponding solution is put forward. The theoretical analysis and experimental results can offer a useful reference to the bearing–rotor system design of ultra-high-speed permanent magnet motors and its subsequent dynamic analysis.

Sign in / Sign up

Export Citation Format

Share Document