Closure to “Discussion of ‘A General Method for Predicting the Influence of Structural Support Upon Rolling Element Bearing Performance’” (1970, ASME J. Lubr. Technol., 92, pp. 127–128)

1970 ◽  
Vol 92 (1) ◽  
pp. 128-128
Author(s):  
E. G. Filetti ◽  
J. H. Rumbarger
Keyword(s):  
Rolling Element Bearing ◽  
Structural Support ◽  
Rolling Element ◽  
Element Bearing ◽  
General Method

Contact characteristic and vibration mechanism of rolling element bearing in the process of fault evolution

2021 ◽  
Vol 235 (1) ◽  
pp. 19-36 ◽  
Author(s):  
Wenbing Tu ◽  
Jinwen Yang ◽  
Wennian Yu ◽  
Ya Luo
Keyword(s):  
Fault Diagnosis ◽  
Vibration Response ◽  
Rolling Element Bearing ◽  
Bearing Fault Diagnosis ◽  
Rolling Element ◽  
Vibration Mechanism ◽  
Contact Characteristic ◽  
Element Bearing ◽  
Bearing Vibration ◽  
Fault Evolution

The vibration response of rolling element bearing has a close relation with its fault. An accurate evaluation of the bearing vibration response is essential to the bearing fault diagnosis. At present, most bearing dynamics models are built based on rigid assumptions, which may not faithfully reveal the dynamic characteristics of bearing in the presence of fault. Moreover, previous similar works mainly focus on the fault with a specified size without considering the varying contact characteristics as the fault evolves. This paper developed an explicit dynamics finite element model for the bearing with three types of raceway faults considering the flexibility of each bearing component in order to accurately study the contact characteristic and vibration mechanism of defective bearings in the process of fault evolution. The developed model is validated by comparing its simulation results with both analytical and experimental results. The dynamic contact patterns between the rolling elements and the fault, the additional displacement due to the fault and the faulty characteristics within the bearing vibration signal during the fault evolution process are investigated. The analysis results from this work can provide practitioners an in-depth understanding towards the internal contact characteristics with the existence of raceway fault and theoretical basis for rolling bearing fault diagnosis.

Feature Extraction of Faulty Rolling Element Bearing Based on Time Synchronous Average and Cepstrum Edit

2014 ◽  
Vol 889-890 ◽  
pp. 666-670
Author(s):  
Zong Tao Li ◽  
Yan Gao ◽  
Xiang Zhou ◽  
Yu Guo
Keyword(s):  
Feature Extraction ◽  
Phase Spectrum ◽  
Rolling Element Bearing ◽  
The Real ◽  
Discrete Frequency ◽  
Rolling Element ◽  
Frequency Components ◽  
Element Bearing ◽  
Inverse Procedure

The cepstrum edit scheme for the vibration feature extraction of the faulty rolling element bearing (REB) is studied in this paper. By combined the time synchronous average (TSA) and the real cepstrum to localize and edit the cepstral lines of the original vibration, the unwanted discrete frequency components can be removed. Then, a corresponding inverse procedure is designed, in which the edited cepstrum and the original phase spectrum are employed to reconstruct the edited vibration for the REB feature extraction. Simulation verified the scheme positively.

scholarly journals Unbalance Response Prediction for Rotors on Ball Bearings Using Speed- and Load-Dependent Nonlinear Bearing Stiffness

2005 ◽  
Vol 2005 (1) ◽  
pp. 53-59 ◽  
Author(s):  
David P. Fleming ◽  
J. V. Poplawski
Keyword(s):  
Response Prediction ◽  
Rolling Element Bearing ◽  
Response Analysis ◽  
Ball Bearings ◽  
Moderate Amount ◽  
Constant Stiffness ◽  
Unbalance Response ◽  
Rolling Element ◽  
Bearing Stiffness ◽  
Element Bearing

Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus, an accurate rotordynamic analysis requires that bearing forces corresponding to the actual bearing deflection be utilized. For this work, bearing forces were calculated by COBRA-AHS, a recently developed rolling-element bearing analysis code. Bearing stiffness was found to be a strong function of bearing deflection, with higher deflection producing markedly higher stiffness. Curves fitted to the bearing data for a range of speeds and loads were supplied to a flexible rotor unbalance response analysis. The rotordynamic analysis showed that vibration response varied nonlinearly with the amount of rotor imbalance. Moreover, the increase in stiffness as critical speeds were approached caused a large increase in rotor and bearing vibration amplitude over part of the speed range compared to the case of constant-stiffness bearings. Regions of bistable operation were possible, in which the amplitude at a given speed was much larger during rotor acceleration than during deceleration. A moderate amount of damping will eliminate the bistable region, but this damping is not inherent in ball bearings.

Sign in / Sign up

Export Citation Format

Share Document