Design and Load Rating Analysis of the Elastic Support for a Large Roller Bearing

1970 ◽  
Vol 92 (1) ◽  
pp. 113-117 ◽  
Author(s):  
W. D. Anderson ◽  
C. L. Dellinger
Keyword(s):  
Static Load ◽  
Load Capacity ◽  
Roller Bearing ◽  
Basic Oxygen Furnace ◽  
Computer Assisted ◽  
Curved Beam ◽  
Load Rating ◽  
Basic Oxygen ◽  
Beam Design ◽  
Assisted Analysis

The Basic Oxygen Furnace comprises a tiltable vessel supported by two trunnions in large roller bearings. To accommodate thermal expansion, the floating bearing is mounted on a deep curved beam which moves axially on two linear bearings. Under loads of 1 to 2 million pounds, the elastic deflection of this beam alters the static load capacity of the roller bearing. This paper describes a computer assisted analysis based on Castigliano’s First Theorem for determining the effective bearing capacity, and secondly for optimizing the beam design.

Computer-Assisted Analysis of Multi-Color Confocal Microscopic Datasets: Automated Light Microscopic Discrimination of Synaptic Relationships

1996 ◽  
Vol 54 ◽  
pp. 284-285
Author(s):  
M Wessendorf ◽  
A Beuning ◽  
D Cameron ◽  
J Williams ◽  
C Knox
Keyword(s):  
Nerve Fibers ◽  
Confocal Scanning Laser Microscopy ◽  
Computer Assisted ◽  
Nerve Terminals ◽  
Neuronal Somata ◽  
Scanning Laser Microscopy ◽  
Confocal Scanning ◽  
Entire Cell ◽  
Confocal Scanning Laser ◽  
Assisted Analysis

Multi-color confocal scanning-laser microscopy (CSLM) allows examination of the relationships between neuronal somata and the nerve fibers surrounding them at sub-micron resolution in x,y, and z. Given these properties, it should be possible to use multi-color CSLM to identify relationships that might be synapses and eliminate those that are clearly too distant to be synapses. In previous studies of this type, pairs of images (e.g., red and green images for tissue stained with rhodamine and fluorescein) have been merged and examined for nerve terminals that appose a stained cell (see, for instance, Mason et al.). The above method suffers from two disadvantages, though. First, although it is possible to recognize appositions in which the varicosity abuts the cell in the x or y axes, it is more difficult to recognize them if the apposition is oriented at all in the z-axis—e.g., if the varicosity lies above or below the neuron rather than next to it. Second, using this method to identify potential appositions over an entire cell is time-consuming and tedious.

Synthesis and characterisation of alites from reduced basic oxygen furnace slags

2021 ◽  
Vol 147 ◽  
pp. 106518
Author(s):  
Katharina Schraut ◽  
Burkart Adamczyk ◽  
Christian Adam ◽  
Dietmar Stephan ◽  
Birgit Meng ◽  
...  
Keyword(s):  
Basic Oxygen Furnace ◽  
Basic Oxygen

scholarly journals Time-Dependent Strength Behavior, Expansion, Microstructural Properties, and Environmental Impact of Basic Oxygen Furnace Slag-Treated Marine-Dredged Clay in South Korea

2021 ◽  
Vol 13 (9) ◽  
pp. 5026
Author(s):  
Gyeong-o Kang ◽  
Jung-goo Kang ◽  
Jin-young Kim ◽  
Young-sang Kim
Keyword(s):  
Particle Size ◽  
Environmental Impact ◽  
South Korea ◽  
Mechanical Characteristics ◽  
Basic Oxygen Furnace ◽  
Microstructural Properties ◽  
Compression Tests ◽  
Basic Oxygen ◽  
Strength Behavior ◽  
Bof Slag

The aim of this study was to investigate the mechanical characteristics, microstructural properties, and environmental impact of basic oxygen furnace (BOF) slag-treated clay in South Korea. Mechanical characteristics were determined via the expansion, vane shear, and unconfined compression tests according to various curing times. Scanning electron microscopy was conducted to analyze microstructural properties. Furthermore, environmental impacts were evaluated by the leaching test and pH measurements. According to the results, at the early curing stage (within 15 h), the free lime (F-CaO) content of the BOF slag is a significant factor for developing the strength of the adopted sample. However, the particle size of the BOF slag influences the increase in the strength at subsequent curing times. It was inferred that the strength behavior of the sample exhibits three phases depending on various incremental strength ratios. The expansion magnitude of the adopted samples is influenced by the F-CaO content and also the particle size of the BOF slag. Regarding the microstructural properties, the presence of reticulation structures in the amorphous gels with intergrowths of rod-like ettringite formation was verified inside the sample. Finally, the pH values and heavy metal leachates of the samples were determined within the compatible ranges of the threshold effect levels in the marine sediments of the marine environment standard of the Republic of Korea.

scholarly journals Component Modification of Basic Oxygen Furnace Slag with C4AF as Target Mineral and Application

2021 ◽  
Vol 13 (12) ◽  
pp. 6536
Author(s):  
Yanrong Zhao ◽  
Pengliang Sun ◽  
Ping Chen ◽  
Xiaomin Guan ◽  
Yuanhao Wang ◽  
...  
Keyword(s):  
Intermediate Phase ◽  
Raw Materials ◽  
Activity Index ◽  
Basic Oxygen Furnace ◽  
Hydration Products ◽  
Basic Oxygen ◽  
Bof Slag ◽  
Mineral Compositions ◽  
Slag Component ◽  
Basic Oxygen Furnace Slag

In this paper, a new method of basic oxygen furnace (BOF) slag component modification with a regulator was studied. The main mineral was designed as C4AF, C2S and C3S in modified BOF slag, and the batching method, mineral compositions, hydration rate, activation index and capability of resisting sulfate corrode also were studied. XRD, BEI and EDS were used to characterize the mineral formation, and SEM was used to study the morphology of hydration products. The results show that most inert phase in BOF slag can be converted into active minerals of C4AF and C2S through reasonable batching calculation and the amount of regulating agent. The formation of C4AF and C2S in modified BOF slag is better, and a small amount of MgO is embedded in the white intermediate phase, but C3S is not detected. With the increase in the CaO/SiO2 ratio in raw materials, the CaO/SiO2 ratio of calcium silicate minerals in modified BOF slag increases, the contents of f-CaO are less than 1.0%, and the activity index improves. Compared with the BOF slag, the activity index and exothermic rate of modified BOF slag improved obviously, and the activity index of 90 days is close to 100%. With the increase in modified BOF slag B cement, the flexural strength decrease; however, the capability of resisting sulfate corrode is improved due to the constant formation of a short rod-like shape ettringite in Na2SO4 solution and the improvement of the structure densification of the hydration products.

scholarly journals Syllabification of the Divine Comedy

2021 ◽  
Vol 14 (3) ◽  
pp. 1-26
Author(s):  
Andrea Asperti ◽  
Stefano Dal Bianco
Keyword(s):  
Text Processing ◽  
Solution Space ◽  
Generative Models ◽  
Divine Comedy ◽  
Point Of View ◽  
Computer Assisted ◽  
Wide Range ◽  
The Divine Comedy ◽  
Left And Right ◽  
Assisted Analysis

We provide a syllabification algorithm for the Divine Comedy using techniques from probabilistic and constraint programming. We particularly focus on the synalephe , addressed in terms of the "propensity" of a word to take part in a synalephe with adjacent words. We jointly provide an online vocabulary containing, for each word, information about its syllabification, the location of the tonic accent, and the aforementioned synalephe propensity, on the left and right sides. The algorithm is intrinsically nondeterministic, producing different possible syllabifications for each verse, with different likelihoods; metric constraints relative to accents on the 10th, 4th, and 6th syllables are used to further reduce the solution space. The most likely syllabification is hence returned as output. We believe that this work could be a major milestone for a lot of different investigations. From the point of view of digital humanities it opens new perspectives on computer-assisted analysis of digital sources, comprising automated detection of anomalous and problematic cases, metric clustering of verses and their categorization, or more foundational investigations addressing, e.g., the phonetic roles of consonants and vowels. From the point of view of text processing and deep learning, information about syllabification and the location of accents opens a wide range of exciting perspectives, from the possibility of automatic learning syllabification of words and verses to the improvement of generative models, aware of metric issues, and more respectful of the expected musicality.

scholarly journals Chiming In: A Computer-Assisted Analysis of Popular Musicians’ Political Engagement on Twitter

2021 ◽  
Vol 7 (2) ◽  
pp. 205630512110190
Author(s):  
Josephine Lukito ◽  
Luis Loya ◽  
Carlos Dávalos ◽  
Jianing Li ◽  
Chau Tong ◽  
...  
Keyword(s):  
Case Studies ◽  
Hip Hop ◽  
Political Engagement ◽  
Future Research ◽  
Computer Assisted ◽  
Christian Music ◽  
Political Issues ◽  
Qualitative Case Studies ◽  
Systematic Examination ◽  
Assisted Analysis

While music as an artistic form is well studied, the individuals behind the art receive relatively less attention. In this article, we provide evidence of celebrity advocacy with a systematic examination of musicians’ political engagement on Twitter. This study estimates the extent to which musicians use Twitter for political purposes, with particular attention to whether such engagement varies across music genres. Through a computational-assisted analysis of 2,286,434 tweets, we group 881 musicians into three categories of political engagement on Twitter: not engaged (comprising the majority of artists), circumstantial engagement, and active political engagement. We examine the latter categories in detail with two qualitative case studies. The findings indicate that musicians from different genres have distinct patterns of political engagement. The Christian music genre shows the most engagement as a whole, especially in philanthropy. On the contrary, the most active accounts are rock and hip-hop artists, some of whom discuss political issues and call for mobilization. We conclude with suggestions for future research.

Sign in / Sign up

Export Citation Format

Share Document