Heat Pipes in the Magnetic-Field Environment of a Fusion Reactor

1972 ◽  
Vol 94 (3) ◽  
pp. 282-288 ◽  
Author(s):  
G. A. Carlson ◽  
M. A. Hoffman
Keyword(s):  
Magnetic Field ◽  
Heat Pipe ◽  
Heat Pipes ◽  
Vapor Flow ◽  
Maximum Heat ◽  
Flow Passage ◽  
Field Environment ◽  
Fluid Properties ◽  
Pipe Geometry ◽  
The Magnetic Field

Heat pipes have been proposed for use in environments where there are strong magnetic fields such as in controlled fusion reactors. The presence of a magnetic field can influence the performance of a heat pipe significantly, depending on the heat-pipe geometry, its orientation in the magnetic field, the heat-pipe materials and fluid properties, as well as the magnetic-field strength. A liquid-metal heat pipe, specifically designed to operate in a magnetic field, will employ a compound wick structure with the optimum liquid-flow passage size larger and the vapor flow passage proportionately smaller than for the no-magnetic-field design. The basic conclusion is that the presence of a magnetic field always results in a lower maximum heat-flux capability, but the detrimental effects of the magnetic field can be greatly reduced by using a heat-pipe geometry optimized for operation in the specific magnetic-field environment.

scholarly journals Working Fluid Quantity Effect on Magnetic Field Control of Heat Pipes

10.14311/1119 ◽  
2009 ◽  
Vol 49 (2) ◽  
Author(s):  
F. Cingroš ◽  
T. Hron
Keyword(s):  
Magnetic Field ◽  
Heat Pipe ◽  
Heat Pipes ◽  
Pure Oxygen ◽  
Working Fluid ◽  
Heat Conductance ◽  
Field Control ◽  
The Magnetic Field ◽  
Quantity Effect ◽  
Standard Regulation

This paper deals with heat pipes controlled by a static magnetic field and with an important side effect – the quantity of working fluid. Heat pipes are able to provide very effective heat transport. Several standard regulation methods are commonly used for this purpose. In previous experiments implemented in our laboratory, we have observed the significant influence of a magnetic field on the heat conductance of the selected heat pipe. A special heat pipe was manufactured for this purpose and pure oxygen was chosen as a working fluid, due to its suitable magnetic properties. The heat pipe operation and the magnetic field control depend on various parameters. This paper is focused on the influence of the quantity of working fluid. Some important results of our experiments are presented and discussed. 

Theoretical Analysis of the Maximum Heat Transport in Triangular Grooves: A Study of Idealized Micro Heat Pipes

1996 ◽  
Vol 118 (3) ◽  
pp. 731-739 ◽  
Author(s):  
G. P. Peterson ◽  
H. B. Ma
Keyword(s):  
Heat Pipe ◽  
Heat Transport ◽  
Control Volume ◽  
Flow Characteristics ◽  
Heat Pipes ◽  
Vapor Flow ◽  
Transport Capacity ◽  
Maximum Heat ◽  
Micro Heat Pipes ◽  
Theoretical Minimum

A mathematical model for predicting the minimum meniscus radius and the maximum heat transport in triangular grooves is presented. In this model, a method for determining the theoretical minimum meniscus radius was developed and used to calculate the capillary heat transport limit based on the physical characteristics and geometry of the capillary grooves. A control volume technique was employed to determine the flow characteristics of the micro heat pipe, in an effort to incorporate the size and shape of the grooves and the effects of the frictional liquid–vapor interaction. In order to compare the heat transport and flow characteristics, a hydraulic diameter, which incorporated these effects, was defined and the resulting model was solved numerically. The results indicate that the heat transport capacity of micro heat pipes is strongly dependent on the apex channel angle of the liquid arteries, the contact angle of the liquid flow, the length of the heat pipe, the vapor flow velocity and characteristics, and the tilt angle. The analysis presented here provides a mechanism whereby the groove geometry can be optimized with respect to these parameters in order to obtain the maximum heat transport capacity for micro heat pipes utilizing axial grooves as the capillary structure.

The Properties of Heat Transfer Research for the Vacuum Heat Pipe in the Magnetic Field

2012 ◽  
Vol 614-615 ◽  
pp. 245-252
Author(s):  
Yun Feng Zhang ◽  
Jian Jun An ◽  
Zheng Rong Chang
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Pipe ◽  
Magnetic Fluid ◽  
Heat Pipes ◽  
Test System ◽  
The Other ◽  
Heat Transfer Characteristics ◽  
Heat Transfer Efficiency ◽  
The Magnetic Field

In view of the highly heat exchanger efficient of heat pipe, two vacuum heat pipes of water and Fe3O4-water were prepared and test system was designed to test the heat transfer efficiency of them when they are within and without magnetic field. The experimental results showed that the heat exchange of heat pipe with magnetic fluid was more efficient than the other one. According to the results and combine the physical properties of two kinds of refrigerant, analyze the heat transfer characteristics of the magnetic fluid in magnetic field.

The Heat Transport Capacity of Micro Heat Pipes

1998 ◽  
Vol 120 (4) ◽  
pp. 1064-1071 ◽  
Author(s):  
J. M. Ha ◽  
G. P. Peterson
Keyword(s):  
Experimental Data ◽  
Heat Pipe ◽  
Heat Transport ◽  
Heat Pipes ◽  
Original Model ◽  
Semiempirical Model ◽  
Transport Capacity ◽  
Predictive Tool ◽  
Maximum Heat ◽  
Micro Heat Pipes

The original analytical model for predicting the maximum heat transport capacity in micro heat pipes, as developed by Cotter, has been re-evaluated in light of the currently available experimental data. As is the case for most models, the original model assumed a fixed evaporator region and while it yields trends that are consistent with the experimental results, it significantly overpredicts the maximum heat transport capacity. In an effort to provide a more accurate predictive tool, a semi-empirical correlation has been developed. This modified model incorporates the effects of the temporal intrusion of the evaporating region into the adiabatic section of the heat pipe, which occurs as the heat pipe approaches dryout conditions. In so doing, the current model provides a more realistic picture of the actual physical situation. In addition to incorporating these effects, Cotter’s original expression for the liquid flow shape factor has been modified. These modifications are then incorporated into the original model and the results compared with the available experimental data. The results of this comparison indicate that the new semiempirical model significantly improves the correlation between the experimental and predicted results and more accurately represents the actual physical behavior of these devices.

scholarly journals The effect of operating parameters on the heat transfer in the heat pipe

2021 ◽  
Vol 2119 (1) ◽  
pp. 012088
Author(s):  
A. A. Litvintceva ◽  
N. I. Volkov ◽  
N. I. Vorogushina ◽  
V. A. Moskovskikh ◽  
V. V. Cheverda
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Pipe ◽  
Temperature Difference ◽  
Heat Pipes ◽  
Working Fluid ◽  
Operating Parameters ◽  
Temperature Stabilization ◽  
Ir Camera ◽  
Fluid Properties

Abstract Heat pipes are a good solution for temperature stabilization, for example, of microelectronics, because these kinds of systems are without any moving parts. Experimental research of the effect of operating parameters on the heat transfer in a cylindrical heat pipe has been conducted. The effect of the working fluid properties and the porous layer thickness on the heat flux and temperature difference in the heat pipe has been investigated. The temperature field of the heat pipe has been investigated using the IR-camera and K-type thermocouples. The data obtained by IR-camera and K-type thermocouples have been compared. It is demonstrated the power transferred from the evaporator to the condenser is a linear function of the temperature difference between them.

Effect of Fluid Loading on the Performance of Wicked Heat Pipes

Volume 3 ◽  
2004 ◽  
Author(s):  
R. Kempers ◽  
A. Robinson ◽  
C. Ching ◽  
D. Ewing
Keyword(s):  
Heat Flux ◽  
Heat Pipe ◽  
Heat Transport ◽  
Heat Pipes ◽  
Working Fluid ◽  
Fluid Loading ◽  
Maximum Heat ◽  
Horizontal Orientation ◽  
Maximum Heat Flux ◽  
Dry Out

A study was performed to experimentally characterize the effect of fluid loading on the heat transport performance of wicked heat pipes. In particular, experiments were performed to characterize the performance of heat pipes with insufficient fluid to saturate the wick and excess fluid for a variety of orientations. It was found that excess working fluid in the heat pipe increased the thermal resistance of the heat pipe, but increased maximum heat flux through the pipe in a horizontal orientation. The thermal performance of the heat pipe was reduced when the amount of working fluid was less than required to saturate the wick, but the maximum heat flux through the heat pipe was significantly reduced at all orientations. It was also found in this case the performance of this heat pipe deteriorated once dry-out occurred.

Modeling of the Flow and Heat Transfer in Micro Heat Pipes

2004 ◽  
Author(s):  
C. B. Sobhan ◽  
G. P. (Bud) Peterson
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Pipes ◽  
Radius Of Curvature ◽  
Vapor Flow ◽  
Axial Distribution ◽  
Cross Sectional ◽  
Flow And Heat Transfer ◽  
Physical Phenomena ◽  
Micro Heat Pipes

The fluid flow and heat transfer characteristics of micro heat pipes are analyzed theoretically, in order to understand the physical phenomena and quantify the influence of various parameters on overall thermal performance of these devices. A one-dimensional model is utilized to solve the governing equations for the liquid/vapor flow and the heat transfer in the heat pipe channel. Variations in the liquid and vapor cross-sectional areas along the axial length of the heat pipe are included and the equations are solved using an implicit finite difference scheme. Appropriate models for fluid friction in small passages with varying cross-sectional areas have been incorporated to yield the axial distribution of the meniscus radius of curvature and the velocity, temperature and pressure in both the liquid and the vapor phases. Using this information, the effective thermal conductivity of the micro heat pipe is modeled, and parametric studies are performed by changing the heat load and cooling rate. The results of the analysis are discussed and compared with other theoretical models and experimental results found in the literature. By so doing, this analysis provides greater insight into the physical phenomena of flow and heat transfer in micro heat pipes and identifies a methodology for optimizing the design of these devices.

Effects of Surface Coating of Nanoparticles on Thermal Performance of Open Loop Pulsating Heat Pipes

2012 ◽  
Author(s):  
Mehdi Taslimifar ◽  
Maziar Mohammadi ◽  
Ali Adibnia ◽  
Hossein Afshin ◽  
Mohammad Hassan Saidi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Surface Coating ◽  
Heat Pipes ◽  
Open Loop ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Performance Of Heat Transfer

Homogenous dispersing of nanoparticles in a base fluid is an excellent way to increase the thermal performance of heat transfer devices especially Heat Pipes (HPs). As a wickless, cheap and efficient heat pipe, Pulsating Heat Pipes (PHPs) are important candidates for thermal application considerations. In the present research an Open Loop Pulsating Heat Pipe (OLPHP) is fabricated and tested experimentally. The effects of working fluid namely, water, Silica Coated ferrofluid (SC ferrofluid), and ferrofluid without surface coating of nanoparticles (ferrofluid), charging ratio, heat input, and application of magnetic field on the overall thermal performance of the OLPHPs are investigated. Experimental results show that ferrofluid has better heat transport capability relative to SC ferrofluid. Furthermore, application of magnetic field improves the heat transfer performance of OLPHPs charged with both ferrofluids.

scholarly journals Thermal analysis of heat pipe using self rewetting fluids

2011 ◽  
Vol 15 (3) ◽  
pp. 879-888 ◽  
Author(s):  
Rathinasamy Senthilkumar ◽  
Subaiah Vaidyanathan ◽  
Sivaramanb Balasubramanian
Keyword(s):  
Surface Tension ◽  
Heat Pipe ◽  
Heat Transport ◽  
Pure Water ◽  
Heat Pipes ◽  
The Self ◽  
Working Fluid ◽  
Surface Tension Gradient ◽  
Condenser Section ◽  
Maximum Heat

This paper discuses the use of self rewetting fluids in the heat pipe. In conventional heat pipes, the working fluid used has a negative surface-tension gradient with temperature. It is an unfavourable one and it decreases the heat transport between the evaporator section and the condenser section. Self rewetting fluids are dilute aqueous alcoholic solutions which have the number of carbon atoms more than four. Unlike other common liquids, self-rewetting fluids have the property that the surface tension increases with temperature up to a certain limit. The experiments are conducted to improve the heat-transport capability and thermal efficiency of capillary assisted heat pipes with the self rewetting fluids like aqueous solutions of n-Butanol and n-Pentanol and its performance is compared with that of pure water. The n-Butanol and n-Pentanol are added to the pure water at a concentration of 0.001moles/lit to prepare the self rewetting fluids. The heat pipes are made up of copper container with a two-layered stainless steel wick consisting of mesh wrapped screen. The experimental results show that the maximum heat transport of the heat pipe is enhanced and the thermal resistances are considerably decreased than the traditional heat pipes filled with water. The fluids used exhibit an anomalous increase in the surface tension with increasing temperature.

Transient Multidimensional Analysis of Nonconventional Heat Pipes With Uniform and Nonuniform Heat Distributions

1991 ◽  
Vol 113 (4) ◽  
pp. 995-1002 ◽  
Author(s):  
Y. Cao ◽  
A. Faghri
Keyword(s):  
Heat Pipe ◽  
Three Dimensional ◽  
Leading Edge ◽  
Heat Pipes ◽  
High Heat ◽  
Heat Fluxes ◽  
Multidimensional Analysis ◽  
Vapor Flow ◽  
Operating Limits ◽  
Good Agreement

A numerical analysis of transient heat pipe performance including nonconventional heat pipes with nonuniform heat distributions is presented. A body-fitted grid system was applied to a three-dimensional wall and wick model, which was coupled with a transient compressible quasi-one-dimensional vapor flow model. The numerical results were first compared with experimental data from cylindrical heat pipes with good agreement. Numerical calculations were then made for a leading edge heat pipe with localized high heat fluxes. Performance characteristics different from conventional heat pipes are illustrated and some operating limits concerning heat pipe design are discussed.

Sign in / Sign up

Export Citation Format

Share Document