Closure to “Discussion of ‘A Note in Comment on “A Reynolds Stress Model for Turbulent Corner Flows”’” (1977, ASME J. Fluids Eng., 99, pp. 596–597)

1977 ◽  
Vol 99 (3) ◽  
pp. 597-598
Author(s):  
Ronald M. C. So
Keyword(s):  
Reynolds Stress ◽  
Reynolds Stress Model ◽  
Stress Model ◽  
Corner Flows

A Reynolds Stress Model for Turbulent Corner Flows—Part II: Comparisons Between Theory and Experiment

1976 ◽  
Vol 98 (2) ◽  
pp. 269-276 ◽  
Author(s):  
F. B. Gessner ◽  
J. K. Po
Keyword(s):  
Reynolds Stress ◽  
Reynolds Stress Model ◽  
Length Variation ◽  
Stress Model ◽  
Duct Flow ◽  
Rectangular Duct ◽  
Proposed Model ◽  
Alternate Model ◽  
Corner Flows ◽  
Good Agreement

The applicability of the Reynolds stress model developed in Part I to fully developed rectangular duct flow is investigated. Two sets of experimental data are analyzed in order to prescribe a representative mixing length variation and appropriate values for the constants in the model. Predicted Reynolds stress values are in good agreement with their experimental counterparts for both sets of data. These results are compared with predictions referred to an alternate model in order to explain discrepancies observed in a previous study. Possible extensions of the proposed model to increase its flexibility are discussed.

A Reynolds Stress Model for Turbulent Corner Flows—Part I: Development of the Model

1976 ◽  
Vol 98 (2) ◽  
pp. 261-268 ◽  
Author(s):  
F. B. Gessner ◽  
A. F. Emery
Keyword(s):  
Reynolds Stress ◽  
Flow Behavior ◽  
Reynolds Stress Model ◽  
Turbulence Structure ◽  
Stress Model ◽  
Mixing Length ◽  
Corner Flow ◽  
Global Representation ◽  
Corner Flows ◽  
Algebraic Reynolds Stress Model

A Reynolds stress model is proposed for modeling the local turbulence structure in flow along a streamwise corner. Initial discussion centers on present methods of predicting internal and extenal corner flow behavior. An algebraic Reynolds stress model is then developed by operating on a modified form of the Reynolds stress transport equations. Application of the model involves specification of two empirical constants and a global representation for the mixing length. The paper concludes with a discussion of the features and limitations of the model.

A Note in Comment on “A Reynolds Stress Model for Turbulent Corner Flows”

1977 ◽  
Vol 99 (3) ◽  
pp. 593-595 ◽  
Author(s):  
Ronald M. C. So
Keyword(s):  
Reynolds Stress ◽  
Shear Flows ◽  
Reynolds Stress Model ◽  
Turbulent Shear ◽  
Stress Model ◽  
General Applicability ◽  
Closure Models ◽  
Closure Scheme ◽  
Stress Components ◽  
Corner Flows

In [1] Gessner and Emery proposed a closure scheme for the Reynolds-stress equations such that the resultant equations are algebraic and can be solved for the various stress components for corner flows. This note summarizes the earlier work on such closure models for different kinds of turbulent shear flows which was omitted by Gessner and Emery and comments on the general applicability of the model proposed by Gessner and Emery.

Prediction of strongly curved turbulent duct flows with Reynolds stress model

AIAA Journal ◽  
1997 ◽  
Vol 35 ◽  
pp. 91-98
Author(s):  
Jiang Luo ◽  
Budugur Lakshminarayana
Keyword(s):  
Reynolds Stress ◽  
Reynolds Stress Model ◽  
Stress Model

A Robust Implementation of a Reynolds Stress Model for Turbomachinery Applications in a Coupled Solver Environment

2020 ◽  
Author(s):  
David Roos Launchbury ◽  
Luca Mangani ◽  
Ernesto Casartelli ◽  
Francesco Del Citto
Keyword(s):  
Reynolds Stress ◽  
Turbulence Modeling ◽  
Computational Cost ◽  
Reynolds Stress Model ◽  
Tip Vortex ◽  
Stability And Convergence ◽  
Stress Model ◽  
Robust Implementation ◽  
Flow Phenomena ◽  
The Stability

Abstract In the industrial simulation of flow phenomena, turbulence modeling is of prime importance. Due to their low computational cost, Reynolds-averaged methods (RANS) are predominantly used for this purpose. However, eddy viscosity RANS models are often unable to adequately capture important flow physics, specifically when strongly anisotropic turbulence and vortex structures are present. In such cases the more costly 7-equation Reynolds stress models often lead to significantly better results. Unfortunately, these models are not widely used in the industry. The reason for this is not mainly the increased computational cost, but the stability and convergence issues such models usually exhibit. In this paper we present a robust implementation of a Reynolds stress model that is solved in a coupled manner, increasing stability and convergence speed significantly compared to segregated implementations. In addition, the decoupling of the velocity and Reynolds stress fields is addressed for the coupled equation formulation. A special wall function is presented that conserves the anisotropic properties of the model near the walls on coarser meshes. The presented Reynolds stress model is validated on a series of semi-academic test cases and then applied to two industrially relevant situations, namely the tip vortex of a NACA0012 profile and the Aachen Radiver radial compressor case.

Sign in / Sign up

Export Citation Format

Share Document