scholarly journals Discussion: “A Single Formula for the Complete Velocity Profile in a Turbulent Boundary Layer” (Dean, R. B., 1976, ASME J. Fluids Eng., 98, pp. 723–726)

1976 ◽  
Vol 98 (4) ◽  
pp. 726-727
Author(s):  
G. C. Paynter
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Single Formula

A Single Formula for the Complete Velocity Profile in a Turbulent Boundary Layer

1976 ◽  
Vol 98 (4) ◽  
pp. 723-726 ◽  
Author(s):  
R. B. Dean
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Boundary Layers ◽  
Close Agreement ◽  
Free Stream ◽  
Pressure Gradients ◽  
Calculation Methods ◽  
Wide Range ◽  
Single Formula

An expression for the wake deficit g(Π, y/δ) in a turbulent boundary layer is combined with a function f(U+) for the inner layer to yield a single formula for the complete velocity profile in the form y+ exp {Kg(Π, y/δ)} = f(U+). Close agreement is shown with data from boundary layers in a wide range of pressure gradients and beneath a turbulent free stream. The formula will be particularly useful for integral and differential calculation methods.

A Superposition Analysis of the Turbulent Boundary Layer in an Adverse Pressure Gradient

1951 ◽  
Vol 18 (1) ◽  
pp. 95-100
Author(s):  
Donald Ross ◽  
J. M. Robertson
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Wall Shear Stress ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Pressure Gradient ◽  
Adverse Pressure Gradient ◽  
Pressure Recovery ◽  
Stress Coefficient ◽  
Wall Shear

Abstract As an interim solution to the problem of the turbulent boundary layer in an adverse pressure gradient, a super-position method of analysis has been developed. In this method, the velocity profile is considered to be the result of two effects: the wall shear stress and the pressure recovery. These are superimposed, yielding an expression for the velocity profiles which approximate measured distributions. The theory also leads to a more reasonable expression for the wall shear-stress coefficient.

Effect of Transverse Curvature on Turbulent-Boundary-Layer Characteristics

1958 ◽  
Vol 2 (04) ◽  
pp. 33-51
Author(s):  
Yun-Sheng Yu
Keyword(s):  
Boundary Layer ◽  
Circular Cylinder ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Pressure Gradient ◽  
Boundary Layer Thickness ◽  
Axial Flow ◽  
Shearing Stress ◽  
Transverse Curvature ◽  
Similarity Laws

Tests made on the turbulent boundary layer on a circular cylinder in axial flow at zero pressure gradient are described. From the measurements, similarity laws of the velocity profile are formulated, and various boundary-layer characteristics are evaluated and compared with the flatplate results. It is found that the effect of transverse curvature is to increase the surface shearing stress and to decrease the boundary-layer thickness, and that the latter variation is more pronounced than the former.

A Model for Velocity Profile in Turbulent Boundary Layer with Drag Reducing Surfactants

2005 ◽  
Vol 15 (3) ◽  
pp. 152-159 ◽  
Author(s):  
A. Krope ◽  
J. Krope ◽  
L.C. Lipus
Keyword(s):  
Numerical Simulation ◽  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
General Problem ◽  
Frictional Resistance ◽  
Mixing Length ◽  
Mean Velocity ◽  
Pipe Section ◽  
Turbulent Water

Abstract A new model for mean velocity profile of turbulent water flow with added drag-reducing surfactants is presented in this paper. The general problem of drag due to frictional resistance is reviewed and drag reduction by the addition of polymers or surfactants is introduced. The model bases on modified Prandtl's mixing length hypothesis and includes three parameters, which depend on additives and can be evaluated by numerical simulation from experimental datasets. The advantage of the model in comparison with previously reported models is that it gives uniform curve for whole pipe section and can be determined for a new surfactant with less necessary measurements. The use of the model is demonstrated for surfactant Habon-G as an example.

Power Law Velocity Profile in the Turbulent Boundary Layer on Transitional Rough Surfaces

2007 ◽  
Vol 129 (8) ◽  
pp. 1083-1100 ◽  
Author(s):  
Noor Afzal
Keyword(s):  
Boundary Layer ◽  
Functional Equation ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Skin Friction ◽  
Power Law ◽  
Wall Roughness ◽  
Closure Model ◽  
Log Law

A new approach to scaling of transitional wall roughness in turbulent flow is introduced by a new nondimensional roughness scale ϕ. This scale gives rise to an inner viscous length scale ϕν∕uτ, inner wall transitional variable, roughness friction Reynolds number, and roughness Reynolds number. The velocity distribution, just above the roughness level, turns out to be a universal relationship for all kinds of roughness (transitional, fully smooth, and fully rough surfaces), but depends implicitly on roughness scale. The open turbulent boundary layer equations, without any closure model, have been analyzed in the inner wall and outer wake layers, and matching by the Izakson-Millikan-Kolmogorov hypothesis leads to an open functional equation. An alternate open functional equation is obtained from the ratio of two successive derivatives of the basic functional equation of Izakson and Millikan, which admits two functional solutions: the power law velocity profile and the log law velocity profile. The envelope of the skin friction power law gives the log law, as well as the power law index and prefactor as the functions of roughness friction Reynolds number or skin friction coefficient as appropriate. All the results for power law and log law velocity and skin friction distributions, as well as power law constants are explicitly independent of the transitional wall roughness. The universality of these relations is supported very well by extensive experimental data from transitional rough walls for various different types of roughnesses. On the other hand, there are no universal scalings in traditional variables, and different expressions are needed for various types of roughness, such as inflectional roughness, monotonic roughness, and others. To the lowest order, the outer layer flow is governed by the nonlinear turbulent wake equations that match with the power law theory as well as log law theory, in the overlap region. These outer equations are in equilibrium for constant value of m, the pressure gradient parameter, and under constant eddy viscosity closure model, the analytical and numerical solutions are presented.

Velocity Profiles of Turbulent Boundary Layers

1969 ◽  
Vol 73 (698) ◽  
pp. 143-147 ◽  
Author(s):  
M. K. Bull
Keyword(s):  
Experimental Data ◽  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Boundary Layers ◽  
Experimental Work ◽  
Constant Pressure ◽  
Velocity Profiles ◽  
Turbulent Boundary Layers ◽  
Boundary Layer Equations

Although a numerical solution of the turbulent boundary-layer equations has been achieved by Mellor and Gibson for equilibrium layers, there are many occasions on which it is desirable to have closed-form expressions representing the velocity profile. Probably the best known and most widely used representation of both equilibrium and non-equilibrium layers is that of Coles. However, when velocity profiles are examined in detail it becomes apparent that considerable care is necessary in applying Coles's formulation, and it seems to be worthwhile to draw attention to some of the errors and inconsistencies which may arise if care is not exercised. This will be done mainly by the consideration of experimental data. In the work on constant pressure layers, emphasis tends to fall heavily on the author's own data previously reported in ref. 1, because the details of the measurements are readily available; other experimental work is introduced where the required values can be obtained easily from the published papers.

Universal mean velocity profile in the jet part of the turbulent boundary layer

1974 ◽  
Vol 27 (1) ◽  
pp. 867-870 ◽  
Author(s):  
A. N. Boiko ◽  
L. N. Dymant ◽  
V. M. Eroshenko
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Mean Velocity

The Effects of Surface Roughness on the Mean Velocity Profile in a Turbulent Boundary Layer

2002 ◽  
Vol 124 (3) ◽  
pp. 664-670 ◽  
Author(s):  
Donald J. Bergstrom ◽  
Nathan A. Kotey ◽  
Mark F. Tachie
Keyword(s):  
Boundary Layer ◽  
Surface Roughness ◽  
Turbulent Boundary Layer ◽  
Velocity Profile ◽  
Friction Velocity ◽  
Outer Region ◽  
Stream Velocity ◽  
Mean Velocity ◽  
Outer Flow ◽  
The Mean

Experimental measurements of the mean velocity profile in a canonical turbulent boundary layer are obtained for four different surface roughness conditions, as well as a smooth wall, at moderate Reynolds numbers in a wind tunnel. The mean streamwise velocity component is fitted to a correlation which allows both the strength of the wake, Π, and friction velocity, Uτ, to vary. The results show that the type of surface roughness affects the mean defect profile in the outer region of the turbulent boundary layer, as well as determining the value of the skin friction. The defect profiles normalized by the friction velocity were approximately independent of Reynolds number, while those normalized using the free stream velocity were not. The fact that the outer flow is significantly affected by the specific roughness characteristics at the wall implies that rough wall boundary layers are more complex than the wall similarity hypothesis would allow.

Sign in / Sign up

Export Citation Format

Share Document