The Effect of Water Chemistry on the Reliability of Modern Large Steam Turbines

1979 ◽  
Vol 101 (3) ◽  
pp. 477-482 ◽  
Author(s):  
B. W. Bussert ◽  
R. M. Curran ◽  
G. C. Gould
Keyword(s):  
Water Chemistry ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Power Plants ◽  
Corrosion Damage ◽  
Corrosion Cracking ◽  
Steam Turbines ◽  
Steam Generators ◽  
Drum Boiler ◽  
Effect Of Water

The results of a survey of 50 once-through steam generators and 60 drum boiler steam supplies for modern large steam turbines are presented in this paper. A questionnaire was circulated and the information gathered was used to assess current industry practices related to feedwater treatment, boilerwater chemistry and steam purity measurements. Further information was gained by visiting 28 of the surveyed power plants and developing more information concerning their water chemistry practices. The results of the survey and visitation information are then related to individual cases of major corrosion damage that have occurred in the turbines of the participating utilities: The once-through steam generators provide the best measure of steam purity because, in general, the steam purity is equal to the feedwater purity. Major corrosion damage, in many instances stress corrosion cracking, appears to be related to upset conditions of steam purity and water chemistry.

Stress Corrosion Cracking and Corrosion Fatigue Analysis of Nuclear Steam Turbine Rotor

2014 ◽  
Author(s):  
Gang Chen ◽  
Puning Jiang ◽  
Xingzhu Ye ◽  
Junhui Zhang ◽  
Yifeng Hu ◽  
...  
Keyword(s):  
Stress Corrosion ◽  
Steam Turbine ◽  
Corrosion Fatigue ◽  
Stress Corrosion Cracking ◽  
Nuclear Power ◽  
Power Plants ◽  
Fatigue Cracking ◽  
Corrosion Cracking ◽  
Major Influence ◽  
Steam Turbines

Although stress corrosion cracking (SCC) and corrosion fatigue cracking can occur in many locations of nuclear steam turbines, most of them initiate at low pressure disc rim, rotor groove and keyway of the shrunk-on disc. For nuclear steam turbine components, long life endurance and high availability are very important factors in the operation. Usually nuclear power plants operating more than sixty years are susceptible to this failure mechanism. If SCC or corrosion fatigue happens, especially in rotor groove or keyway, it has a major influence on nuclear steam turbine life. In this paper, established methods for the SCC and corrosion fatigue-controlled life prediction of steam turbine components were applied to evaluating a new shrunk-on disc that had suffered local keyway surface damage during manufacture and loss of residual compressive stress.

Strategies for Treating Weld Residual Stresses in Probabilistic Fracture Mechanics Codes

2011 ◽  
Author(s):  
Frederick W. Brust ◽  
R. E. Kurth ◽  
D. J. Shim ◽  
David Rudland
Keyword(s):  
Fracture Mechanics ◽  
Residual Stresses ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Nuclear Power ◽  
Power Plants ◽  
Degradation Mechanism ◽  
Welding Process ◽  
Corrosion Cracking ◽  
Uncertainty Sources

Risk based treatment of degradation and fracture in nuclear power plants has emerged as an important topic in recent years. One degradation mechanism of concern is stress corrosion cracking. Stress corrosion cracking is strongly driven by the weld residual stresses (WRS) which develop in nozzles and piping from the welding process. The weld residual stresses can have a large uncertainty associated with them. This uncertainty is caused by many sources including material property variations of base and welds metal, weld sequencing, weld repairs, weld process method, and heat inputs. Moreover, often mitigation procedures are used to correct a problem in an existing plant, which also leads to uncertainty in the WRS fields. The WRS fields are often input to probabilistic codes from weld modeling analyses. Thus another source of uncertainty is represented by the accuracy of the predictions compared with a limited set of measurements. Within the framework of a probabilistic degradation and fracture mechanics code these uncertainties must all be accounted for properly. Here we summarize several possibilities for properly accounting for the uncertainty inherent in the WRS fields. Several examples are shown which illustrate ranges where these treatments work well and ranges where improvement is needed. In addition, we propose a new method for consideration. This method consists of including the uncertainty sources within the WRS fields and tabulating them within tables which are then sampled during the probabilistic realization. Several variations of this process are also discussed. Several examples illustrating the procedures are presented.

The Geometry of Steam Generator Tube and Its Relevance to the Occurrence of Stress Corrosion Cracking in Operating Nuclear Power Plants

2010 ◽  
Author(s):  
Deok Hyun Lee ◽  
Do Haeng Hur ◽  
Myung Sik Choi ◽  
Kyung Mo Kim ◽  
Jung Ho Han ◽  
...  
Keyword(s):  
Stress Corrosion ◽  
Steam Generator ◽  
Stress Corrosion Cracking ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Corrosion Cracking ◽  
Location Type ◽  
Steam Generator Tubes ◽  
Non Destructive

Occurrences of a stress corrosion cracking in the steam generator tubes of operating nuclear power plants are closely related to the residual stress existing in the local region of a geometric change, that is, expansion transition, u-bend, ding, dent, bulge, etc. Therefore, information on the location, type and quantitative size of a geometric anomaly existing in a tube is a prerequisite to the activity of a non destructive inspection for an alert detection of an earlier crack and the prediction of a further crack evolution [1].

scholarly journals Interaction of Cyclic Loading (Low-Cyclic Fatigue) with Stress Corrosion Cracking (SCC) Growth Rate

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Rehmat Bashir ◽  
He Xue ◽  
Rui Guo ◽  
Yueqi Bi ◽  
Muhammad Usman
Keyword(s):  
Growth Rate ◽  
Stress Corrosion ◽  
Crack Growth ◽  
Stress Corrosion Cracking ◽  
Nuclear Power ◽  
Power Plants ◽  
Structural Integrity ◽  
Cyclic Fatigue ◽  
Joint Effect ◽  
Corrosion Cracking

The structural integrity analysis of nuclear power plants (NPPs) is an essential procedure since the age of NPPs is increasing constantly while the number of new NPPs is still limited. Low-cyclic fatigue (LCF) and stress corrosion cracking (SSC) are the two main causes of failure in light-water reactors (LWRs). In the last few decades, many types of research studies have been conducted on these two phenomena separately, but the joint effect of these two mechanisms on the same crack has not been discussed yet though these two loads exist simultaneously in the LWRs. SCC is mainly a combination of the loading, the corrosive medium, and the susceptibility of materials while the LCF depends upon the elements such as compression, moisture, contact, and weld. As it is an attempt to combine SCC and LCF, this research focuses on the joint effect of SCC and LCF loading on crack propagation. The simulations are carried out using extended finite element method (XFEM) separately, for the SCC and LCF, on an identical crack. In the case of SCC, da/dt(mm/sec) is converted into da/dNScc (mm/cycle), and results are combined at the end. It has been observed that the separately calculated results for SCC da/dNScc and LCF da/dNm of crack growth rate are different from those of joint/overall effect,  da/dNom. By applying different SCC loads, the overall crack growth is measured as SCC load becomes the main cause of failure in LWRs in some cases particularly in the presence of residual stresses.

Probabilistic Fracture Mechanics Benchmarking Study Involving the xLPR and PASCAL-SP Codes: Analysis by PASCAL-SP

2020 ◽  
Author(s):  
Akihiro Mano ◽  
Jinya Katsuyama ◽  
Yinsheng Li
Keyword(s):  
Fracture Mechanics ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Nuclear Power ◽  
Power Plants ◽  
Corrosion Cracking ◽  
Energy Agency ◽  
Pressurized Water ◽  
Water Reactor ◽  
Probabilistic Fracture Mechanics

Abstract A probabilistic fracture mechanics (PFM) analysis code, PASCAL-SP, has been developed by Japan Atomic Energy Agency (JAEA) to evaluate the failure probability of piping within nuclear power plants considering aged-related degradations such as stress corrosion cracking and fatigue for both pressurized water reactor and boiling water reactor environments. To strengthen the applicability of PASCAL-SP, a benchmarking study is being performed with a PFM analysis code, xLPR, which has been developed by U.S.NRC in collaboration with EPRI. In this benchmarking study, deterministic and probabilistic analyses are undertaken on primary water stress corrosion cracking using the common analysis conditions. A deterministic analysis on the weld residual stress distributions is also considered. These analyses are carried out by U.S.NRC and JAEA independently using their own codes. Currently, the deterministic analyses by both xLPR and PASCAL-SP codes have been finished and probabilistic analyses are underway. This paper presents the details of conditions and comparisons of the results between the two aforementioned codes for the deterministic analyses. Both codes were found to provide almost the same results including the values of stress intensity factor. The conditions and results of the probabilistic analysis obtained from PASCAL-SP are also discussed.

Sign in / Sign up

Export Citation Format

Share Document