A Study of Multiple Hole Extrusion

1979 ◽  
Vol 101 (2) ◽  
pp. 135-138
Author(s):  
Amit Bagchi ◽  
John G. Lenard
Keyword(s):  
Velocity Field ◽  
Mathematical Models ◽  
Maximum Power ◽  
Experimental Results ◽  
Significant Parameter ◽  
Area Reduction

Two mathematical models proposed by Avitzur and valid for axially symmetrical square extrusion are tested for their ability to predict the maximum power required in single as well as multiple hole extrusion. Comparison to experimental results obtained using plumber’s lead shows good correlation. The most significant parameter is shown to be the total area reduction. The velocity field in multiple hole extrusion—which by necessity must be nonaxially symmetrical—appears not to affect the power required for extrusion.

RELIABILITY ASSESSMENT OF AXIALLY COMPRESSED COMPOSITE CYLINDRICAL SHELLS WITH RANDOM IMPERFECTIONS

2011 ◽  
Vol 11 (02) ◽  
pp. 215-236 ◽  
Author(s):  
MATTEO BROGGI ◽  
ADRIANO CALVI ◽  
GERHART I. SCHUËLLER
Keyword(s):  
Mathematical Models ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Reliability Assessment ◽  
Buckling Analysis ◽  
Buckling Load ◽  
Experimental Results ◽  
Drastic Decrease ◽  
Different Types ◽  
Probability And Statistics

Cylindrical shells under axial compression are susceptible to buckling and hence require the development of enhanced underlying mathematical models in order to accurately predict the buckling load. Imperfections of the geometry of the cylinders may cause a drastic decrease of the buckling load and give rise to the need of advanced techniques in order to consider these imperfections in a buckling analysis. A deterministic buckling analysis is based on the use of the so-called knockdown factors, which specifies the reduction of the buckling load of the perfect shell in order to account for the inherent uncertainties in the geometry. In this paper, it is shown that these knockdown factors are overly conservative and that the fields of probability and statistics provide a mathematical vehicle for realistically modeling the imperfections. Furthermore, the influence of different types of imperfection on the buckling load are examined and validated with experimental results.

Experimental Research to Evaluate Thermal Behavior of a Brushless Driving Servomotor for Linear Motion NC Axis Experimental Stand

2015 ◽  
Vol 762 ◽  
pp. 55-60
Author(s):  
Georgia Cezara Avram ◽  
Florin Adrian Nicolescu ◽  
Radu Constantin Parpală ◽  
Constantin Dumitrascu
Keyword(s):  
Thermal Behavior ◽  
Mathematical Models ◽  
Experimental Research ◽  
Infrared Imaging ◽  
Experimental Results ◽  
Ball Screw ◽  
Linear Motion ◽  
Functional Optimization ◽  
Thermal Infrared Imaging ◽  
Experimental Stand

This paper presents the works carried out by the authors in the field of structural and functional optimization of industrial robot's numerically controlled (NC) axes. The study includes the results obtained in the research stage of the experimental measurements performed to evaluate the electrical servomotor's thermal behavior using a thermal (infrared) imaging camera. The analyzed servomotor is a brushless servomotor integrated in an experimental stand for linear motion NC axis experimental research, existing in the MMS department from EMTS faculty. Supplementary to the driving servomotor, the experimental stand includes a belt drive transmission, a ball screw - bearings assembly and a driven element guided by ball rail system. This experimental research phase is part of the doctoral thesis of first author and was conducted in order to validate the mathematical models developed in the PhD thesis. Thus, experimental results presented in the paper have been used to validate first mathematical models for electric motor's preliminary selection and checking, (performed by determining the total reflected inertia of the mechanical system on motor shaft level) as well as the mathematical models for final selection and checking (by evaluating the servomotor's thermal energy dissipation, and servomotor's internal and external maximum operating temperature). Second, the experimental results have been used to validate the assisted simulation for structural and functional optimization of industrial robot's NC axes based on both servomotor and drive's thermal behavior analysis, performed in the thesis by means of a dedicated commercial software package.

scholarly journals Two Dimensional Flow Analysis of a Laboratory Centrifugal Pump

1990 ◽  
Author(s):  
S. M. Miner ◽  
R. D. Flack ◽  
P. E. Allaire
Keyword(s):  
Velocity Field ◽  
Stagnation Point ◽  
Centrifugal Pump ◽  
Flow Rate ◽  
Flow Analysis ◽  
Tangential Component ◽  
Design Flow ◽  
Experimental Results ◽  
Two Dimensional ◽  
Flow Angle

Two dimensional potential flow was used to determine the velocity field within a laboratory centrifugal pump. In particular, the finite element technique was used to model the impeller and volute simultaneously. The rotation of the impeller within the volute was simulated by using steady state solutions with the impeller in 10 different angular orientations. This allowed the interaction between the impeller and the volute to develop naturally as a result of the solution. The results for the complete pump model showed that there are circumferential asymmetries in the velocity field, even at the design flow rate. Differences in the relative velocity components were as large as 0.12 m/sec for the radial component and 0.38 m/sec for the tangential component, at the impeller exit. The magnitude of these variations was roughly 25% of the magnitude of the average radial and tangential velocities at the impeller exit. These asymmetries were even more pronounced at off design flow rates. The velocity field was also used to determine the location of the tongue stagnation point and to calculate the slip within the impeller. The stagnation point moved from the discharge side of the tongue to the impeller side of the tongue, as the flow rate increased from below design flow to above design flow. At design flow, values of slip ranged from 0.96 to 0.71, from impeller inlet to impeller exit. For all three types of data (velocity profiles, stagnation point location, and slip factor) comparison was made to laser velocimeter data, taken for the same pump. At the design flow, the computational and experimental results agreed to within 17% for the velocity magnitude, and 2° for the flow angle. The stagnation point locations coincided for the computational and experimental results, and the values for slip agreed to within 10%.

scholarly journals The Thermoelectric Solar Panels

2016 ◽  
Vol 3 (1) ◽  
pp. 9-14 ◽  
Author(s):  
R. Ahiska ◽  
L. Nykyruy ◽  
G. Omer ◽  
G. Mateik
Keyword(s):  
Electric Power ◽  
Internal Resistance ◽  
Solar Panel ◽  
Maximum Power ◽  
Experimental Results ◽  
Solar Panels ◽  
Photovoltaic Panel ◽  
Load Characteristics ◽  
Panel Surface

In this study, load characteristics of thermoelectric and photovoltaic solar panels areinvestigated and compared with each other with experiments. Thermoelectric solar panels convertsthe heat generated by sun directly to electricity; while, photovoltaic solar pales converts photonicenergy from sun to electricity. In both types, maximum power can be obtained when the loadresistance is equal to internal resistance. According to experimental results, power generated fromunit surface with thermoelectric panel is 30 times greater than the power generated by photovoltaicpanel. From a panel surface of 1 m2, thermoelectric solar panel has generated 4 kW electric power,while from the same surface, photovoltaic panel has generated 132 W only.

Design and Implementation of Neuro-Fuzzy Controller Using FPGA for Sun Tracking System

2016 ◽  
Vol 12 (2) ◽  
pp. 123-136 ◽  
Author(s):  
Ammar Aldair ◽  
Adel Obed ◽  
Ali Halihal
Keyword(s):  
Optical Sensors ◽  
Fuzzy Logic Controller ◽  
Fuzzy Controller ◽  
Tracking System ◽  
Maximum Power ◽  
Experimental Results ◽  
The Sun ◽  
Fixed Angle ◽  
Pv Panel ◽  
Neuro Fuzzy

Nowadays, renewable energy is being used increasingly because of the global warming and destruction of the environment. Therefore, the studies are concentrating on gain of maximum power from this energy such as the solar energy. A sun tracker is device which rotates a photovoltaic (PV) panel to the sun to get the maximum power. Disturbances which are originated by passing the clouds are one of great challenges in design of the controller in addition to the losses power due to energy consumption in the motors and lifetime limitation of the sun tracker. In this paper, the neuro-fuzzy controller has been designed and implemented using Field Programmable Gate Array (FPGA) board for dual axis sun tracker based on optical sensors to orient the PV panel by two linear actuators. The experimental results reveal that proposed controller is more robust than fuzzy logic controller and proportional-integral (PI) controller since it has been trained offline using Matlab tool box to overcome those disturbances. The proposed controller can track the sun trajectory effectively, where the experimental results reveal that dual axis sun tracker power can collect 50.6% more daily power than fixed angle panel. Whilst one axis sun tracker power can collect 39.4 % more daily power than fixed angle panel. Hence, dual axis sun tracker can collect 8 % more daily power than one axis sun tracker.

The Planets in Ancient Egypt

2019 ◽  
Author(s):  
Joachim Friedrich Quack
Keyword(s):  
Mathematical Models ◽  
Ancient Egypt ◽  
Roman Period ◽  
Maximum Power ◽  
The Sun ◽  
Late Period ◽  
Religious Texts ◽  
Greco Roman ◽  
Religious Associations ◽  
Night Sky

The five visible planets are certainly attested to in Egyptian sources from about 2000 bce. The three outer ones are religiously connected with the falcon-headed god Horus, Venus with his father Osiris, and Mercury with Seth, the brother and murderer of Osiris. Clear attestations of the planets are largely limited to decoration programs covering the whole night sky. There are a number of passages in religious texts where planets may be mentioned, but many of them are uncertain because the names given to the planets are for most of them not specific enough to exclude other interpretations. There may have been a few treatises giving a more detailed religious interpretation of the planets and their behavior, but they are badly preserved and hardly understandable in the details. In the Late Period, probably under Mesopotamian influence, the sequence of the planets as well as their religious associations could change; at least one source links Saturn with the Sun god, Mars with Miysis, Mercury with Thot, Venus with Horus, son of Isis, and Jupiter with Amun, arranging the planets with those considered negative in astrology first, separated from the positive ones by the vacillating Mercury. Late monuments depicting the zodiac place the planets in positions which are considered important in astrology, especially the houses or the place of maximum power (hypsoma; i.e., “exaltation”). Probably under Babylonian influence, in the Greco-Roman Period mathematical models for calculating the positions and phases of the planets arose. These were used for calculating horoscopes, of which a number in demotic Egyptian are attested. There are also astrological treatises (most still unpublished) in the Egyptian language which indicate the relevance of planets for forecasts, especially for the fate of individuals born under a certain constellation, but also for events important for the king and the country in general; they could be relevant also for enterprises begun at a certain date. There is some reception of supposedly or actually specific Egyptian planet sequences, names and religious associations in Greek sources.

Brittle failure in compression: splitting faulting and brittle-ductile transition

1986 ◽  
Vol 319 (1549) ◽  
pp. 337-374 ◽  
Keyword(s):  
Mathematical Models ◽  
Closed Form ◽  
Brittle Failure ◽  
Failure Modes ◽  
Ductile Failure ◽  
Singular Integral Equations ◽  
Quantitative Model ◽  
Experimental Results ◽  
Laboratory Model ◽  
Brittle Ductile Transition

The micromechanics of brittle failure in compression and the transition from brittle to ductile failure, observed under increasing confining pressures, are examined in the light of existing experimental results and model studies. First, the micromechanics of axial splitting and faulting is briefly reviewed, certain mathematical models recently developed for analysing these failure modes are outlined, and some new, simple closed-form analytic solutions of crack growth in compression and some new quantitative model experimental results are presented. Then, a simple two-dimensional mathematical model is proposed for the analysis of the brittle—ductile transition process, the corresponding elasticity boundary-value problem is formulated in terms of singular integral equations, the solution method is given, and numerical results are obtained and their physical implications are discussed. In addition, a simple closed-form analytic solution is presented and, by comparing its results with those of the exact formulation, it is shown that the analytic estimates are reasonably accurate in the range of the brittle response of the material. Finally, the results of some laboratory model experiments are reported in an effort to support the mathematical models.

Development of Prediction Technology of Two-Phase Flow Dynamics Under Earthquake Acceleration: (12) Bubble Motion Along the Flow in Structure Vibration

2014 ◽  
Author(s):  
Yuki Kato ◽  
Rie Arai ◽  
Akiko Kaneko ◽  
Hideaki Monji ◽  
Yutaka Abe ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Velocity Field ◽  
Test Section ◽  
Two Phase Flow ◽  
Flow Behavior ◽  
Bubbly Flow ◽  
Experimental Results ◽  
Phase Flow ◽  
Bubble Motion ◽  
Two Phase

In a nuclear power plant, one of the important issues is an evaluation of the safety of the reactor core and its pipes when an earthquake occurs. Many researchers have conducted studies on constructions of plants. Consequently, there is some knowledge about earthquake-resisting designs. However the influence of an earthquake vibration on thermal fluid inside a nuclear reactor plant is not fully understood. Especially, there is little knowledge how coolant in a core response when large earthquake acceleration is added. Some studies about the response of fluid to the vibration were carried out. And it is supposed that the void fraction and/or the power of core are fluctuated with the oscillation by the experiments and numerical analysis. However the detailed mechanism about a kinetic response of gas and liquid phases is not enough investigated, therefore the aim of this study is to clarify the influence of vibration of construction on bubbly flow behavior. In order to investigate the influence of vibration of construction on bubbly flow behavior, we visualized bubbly flow in pipeline on which sine wave was applied. In a test section, bubbly flow was produced by injecting gas into liquid flow through a horizontal circular pipe. In order to vibrate the test section, an oscillating table was used. The frequency and acceleration of vibration added from the oscillating table was from 1.0 Hz to 10 Hz and . 0.4 G (1 G=9.8 m/s2) at each frequency. The test section and a high speed video camera were fixed on the oscillating table. Thus the relative velocity between the camera and the test section was ignored. PIV measurement was also conducted to investigate interaction between bubble motion and surround in flow structure. Liquid pressure was also measured at upstream and downstream of the test section. The effects of oscillation on bubbly flow were quantitatively evaluated by these pressure measurements and the velocity field. In the results, it was observed that the difference of bubble motion by changing oscillation frequency. Moreover it was suggested that the bubble deformation is correlated with the fluctuation of liquid velocity field around the bubble and the pressure gradient in the flow area. In addition, these experimental results were compared with numerical simulation by a detailed two-phase flow simulation code with an advanced interface tracking method, TPFIT. Numerical simulation was qualitatively agreed with experimental results.

scholarly journals Performances of an Interleaved High Step-Up Converter with Different Soft-Switching Snubbers for PV Energy Conversion Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Sheng-Yu Tseng ◽  
Hung-Yuan Wang ◽  
Chih-Yang Hsu
Keyword(s):  
Energy Conversion ◽  
Power Level ◽  
Soft Switching ◽  
Maximum Power ◽  
Experimental Results ◽  
Output Power Level ◽  
Point Tracking ◽  
Switching Losses ◽  
Power Point ◽  
Observation Method

This paper proposes an interleaved high step-up converter with different soft-switching snubbers for PV energy conversion applications. For the high step-up converter, interleaved and coupled-inductor technologies are used to reduce output ripple current and increase output power level. Simultaneously, two types of snubbers, a single-capacitor snubber and boost type snubber, are introduced separately into the discussed converters for comparing their performances of conversion efficiency and switching losses. For drawing maximum power from the PV arrays, a perturbation-and-observation method realized with the microcontroller is adopted to achieve maximum power point tracking (MPPT) algorithm and power regulating scheme. Finally, two prototypes of the interleaved coupled-inductor boost converter with a single-capacitor snubber and with boost type snubber are implemented, respectively. The experimental results obtained are used to verify and compare the performances and feasibilities of the discussed converters with different snubbers in PV conversion applications. The experimental results show that the proposed system is suitable for PV energy conversion applications when the duty ratios of switches of the converter are less than 0.5.

scholarly journals STRENGTH DEVELOPMENT OF CONCRETE WITH FLY ASH ADDITION

2007 ◽  
Vol 13 (2) ◽  
pp. 115-122 ◽  
Author(s):  
Marta Kosior-Kazberuk ◽  
Małgorzata Lelusz
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Mathematical Models ◽  
Statistical Methods ◽  
Experimental Results ◽  
Strength Development ◽  
Hardened Concrete ◽  
Test Results ◽  
Different Types ◽  
Compressive Strength Of Concrete

Based on experimental results, mathematical models were elaborated to predict the development of compressive strength of concrete with fly ash replacement percentages up to 30 %. Strength of concrete with different types of cement (CEM I 42.5, CEM I 32.5, CEM III 32.5), after 2, 28, 90, 180 days of curing, have been analysed to evaluate the effect of addition content, the time of curing and the type of cement on the compressive strength changes. The adequacy of equations obtained was verified using statistical methods. The test results of selected properties of binders and hardened concrete with fly ash are also included. The analysis showed that concrete with fly ash is characterised by advantageous applicable qualities.

Sign in / Sign up

Export Citation Format

Share Document