Simultaneous Coordination of Two Rigid Body Motions Through Infinitesimally Separated Positions

1975 ◽  
Vol 97 (2) ◽  
pp. 527-531
Author(s):  
M. N. Siddhanty ◽  
A. H. Soni
Keyword(s):  
Rigid Body ◽  
Fourth Order ◽  
Rigid Bodies ◽  
Mathematical Approach ◽  
Link Mechanism ◽  
Rigid Body Motions ◽  
Design Solutions ◽  
Mathematical Relationships

A generalized mathematical approach is developed to guide two rigid bodies for simultaneous coordination of their infinitesimally separated positions. Mathematical relationships are developed to incorporate up to fourth-order derivatives while specifying infintesimally separated positions. The approach is demonstrated by considering an eight-link mechanism. It is shown that for a maximum of five precision positions of the two rigid bodies, a maximum of 1024 design solutions are possible.

On Higher Order Point-Line and the Associated Rigid Body Motions

2006 ◽  
Vol 129 (2) ◽  
pp. 166-172 ◽  
Author(s):  
Yi Zhang ◽  
Kwun-Lon Ting
Keyword(s):  
Rigid Body ◽  
Higher Order ◽  
Rigid Bodies ◽  
Rigid Body Motion ◽  
Body Motion ◽  
Dual Quaternion ◽  
Displacement Operator ◽  
Screw Motion ◽  
Rigid Body Motions ◽  
Point Line

This paper presents a study on the higher-order motion of point-lines embedded on rigid bodies. The mathematic treatment of the paper is based on dual quaternion algebra and differential geometry of line trajectories, which facilitate a concise and unified description of the material in this paper. Due to the unified treatment, the results are directly applicable to line motion as well. The transformation of a point-line between positions is expressed as a unit dual quaternion referred to as the point-line displacement operator depicting a pure translation along the point-line followed by a screw displacement about their common normal. The derivatives of the point-line displacement operator characterize the point-line motion to various orders with a set of characteristic numbers. A set of associated rigid body motions is obtained by applying an instantaneous rotation about the point-line. It shows that the ISA trihedrons of the associated rigid motions can be simply depicted with a set of ∞2 cylindroids. It also presents for a rigid body motion, the locus of lines and point-lines with common rotation or translation characteristics about the line axes. Lines embedded in a rigid body with uniform screw motion are presented. For a general rigid body motion, one may find lines generating up to the third order uniform screw motion about these lines.

A Computationally Efficient Planar Rigid Body Velocity Measure

2009 ◽  
Author(s):  
Luis E. Criales ◽  
Joseph M. Schimmels
Keyword(s):  
Rigid Body ◽  
Rigid Bodies ◽  
Body Motion ◽  
Computationally Efficient ◽  
Straight Line ◽  
Body Velocity ◽  
Velocity Measure ◽  
Rigid Body Motions ◽  
Line Path ◽  
Planar Motions

A planar rigid body velocity measure based on the instantaneous velocity of all particles that constitute a rigid body is developed. This measure compares the motion of each particle to an “ideal”, but usually unobtainable, motion. This ideal motion is one that would carry each particle from its current position to its desired position on a straight-line path. Although the ideal motion is not a valid rigid body motion, this does not preclude its use as a reference standard in evaluating valid rigid body motions. The optimal instantaneous planar motions for general rigid bodies in translation and rotation are characterized. Results for an example planar positioning problem are presented.

Nonintrinsicity of References in Rigid-Body Motions

2001 ◽  
Vol 68 (6) ◽  
pp. 929-936 ◽  
Author(s):  
S. Stramigioli
Keyword(s):  
Rigid Body ◽  
Lie Groups ◽  
Relative Motion ◽  
Lie Group ◽  
Rigid Bodies ◽  
Group Approach ◽  
Rigid Body Motions ◽  
Reference Problem

This paper shows that in the use of Lie groups for the study of the relative motion of rigid bodies some assumptions are not explicitly stated. A commutation diagram is shown which points out the “reference problem” and its simplification to the usual Lie group approach under certain conditions which are made explicit.

Velocity and Acceleration Analysis of Contact Between Three-Dimensional Rigid Bodies

1996 ◽  
Vol 63 (4) ◽  
pp. 974-984 ◽  
Author(s):  
N. Sankar ◽  
V. Kumar ◽  
Xiaoping Yun
Keyword(s):  
Rigid Body ◽  
Relative Motion ◽  
Three Dimensional ◽  
Rigid Bodies ◽  
Local Surface ◽  
Contact Points ◽  
Pure Rolling ◽  
Acceleration Analysis ◽  
Rigid Body Motions ◽  
Two Bodies

During manipulation and locomotion tasks encountered in robotics, it is often necessary to control the relative motion between two contacting rigid bodies. In this paper we obtain the equations relating the motion of the contact points on the pair of contacting bodies to the rigid-body motions of the two bodies. The equations are developed up to the second order. The velocity and acceleration constraints for contact, for rolling, and for pure rolling are derived. These equations depend on the local surface properties of each contacting body. Several examples are presented to illustrate the nature of the equations.

Characterization of Instantaneous Point-Line Motions

2004 ◽  
Author(s):  
Yi Zhang ◽  
Kwun-Lon Ting
Keyword(s):  
Rigid Body ◽  
Rigid Bodies ◽  
Dual Quaternion ◽  
Third Order ◽  
Displacement Operator ◽  
Instantaneous Point ◽  
Rigid Body Motions ◽  
Point Line ◽  
Derivatives Of

This article discusses systematically the characterization of instantaneous point-line motions, and the higher-order relationship between a point-line motion and the associated rigid body motions. The transformation of a point-line between two positions is depicted as a pure translation along the point-line followed by a screw displacement about their common normal and expressed with a unit dual quaternion referred to as the point-line displacement operator. The derivatives of the point-line displacement operator characterize the point-line motion to various orders with a set of characteristic numbers. Such a treatment leads to a consistent expression or unified treatment for the transformation of lines, point-lines, and rigid bodies. The relationships between point-line motions and rigid body motions are addressed in detail up to the third order.

Velocity and Acceleration Analysis of Contact Between Three-Dimensional Rigid Bodies

1994 ◽  
Author(s):  
Nilanjan Sarkar ◽  
Vijay Kumar ◽  
Xiaoping Yun
Keyword(s):  
Rigid Body ◽  
Relative Motion ◽  
Three Dimensional ◽  
Rigid Bodies ◽  
Local Surface ◽  
Contact Points ◽  
Pure Rolling ◽  
Acceleration Analysis ◽  
Rigid Body Motions ◽  
Two Bodies

Abstract During manipulation and locomotion tasks encountered in robotics, it is often necessary to control the relative motion between two contacting rigid bodies. In this paper we obtain the equations relating the motion of the contact points on the pair of contacting bodies to the rigid body motions of the two bodies. The equations are developed up to the second order. The velocity and acceleration constraints for contact, for rolling, and for pure rolling are derived. These equations depend on the local surface properties of each contacting body. Several examples are presented to illustrate the nature of the equations.

scholarly journals ClusterSLAM: A SLAM backend for simultaneous rigid body clustering and motion estimation

2021 ◽  
Author(s):  
Jiahui Huang ◽  
Sheng Yang ◽  
Zishuo Zhao ◽  
Yu-Kun Lai ◽  
Shi-Min Hu
Keyword(s):  
Motion Estimation ◽  
Rigid Body ◽  
Iterative Scheme ◽  
Dynamic Environments ◽  
Rigid Bodies ◽  
Factor Graph ◽  
Agglomerative Clustering ◽  
Multiple Objects ◽  
Graph Optimization ◽  
Dynamic Objects

AbstractWe present a practical backend for stereo visual SLAM which can simultaneously discover individual rigid bodies and compute their motions in dynamic environments. While recent factor graph based state optimization algorithms have shown their ability to robustly solve SLAM problems by treating dynamic objects as outliers, their dynamic motions are rarely considered. In this paper, we exploit the consensus of 3D motions for landmarks extracted from the same rigid body for clustering, and to identify static and dynamic objects in a unified manner. Specifically, our algorithm builds a noise-aware motion affinity matrix from landmarks, and uses agglomerative clustering to distinguish rigid bodies. Using decoupled factor graph optimization to revise their shapes and trajectories, we obtain an iterative scheme to update both cluster assignments and motion estimation reciprocally. Evaluations on both synthetic scenes and KITTI demonstrate the capability of our approach, and further experiments considering online efficiency also show the effectiveness of our method for simultaneously tracking ego-motion and multiple objects.

Analytical models for the rigid body motions of skew bridges

1987 ◽  
Vol 15 (8) ◽  
pp. 923-944 ◽  
Author(s):  
Emmanuel A. Maragakis ◽  
Paul C. Jennings
Keyword(s):  
Rigid Body ◽  
Analytical Models ◽  
Skew Bridges ◽  
Rigid Body Motions

Type Synthesis of Compliant Mechanisms Employing a Simplified Approach to Segment Type

1994 ◽  
Author(s):  
Morgan D. Murphy ◽  
Ashok Midha ◽  
Larry L. Howell
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Type Synthesis ◽  
Simplified Approach ◽  
Design Procedures ◽  
Synthesis Techniques ◽  
Design Solutions ◽  
Synthesis Methodology

Abstract The formulation of design procedures for rigid-body mechanisms has benefited from the application of type-synthesis techniques. Therefore, with modifications to allow for inclusions of compliance, type synthesis is seen as a useful tool in the design of compliant mechanisms. Previous efforts have developed methods that result in a large number of possible design solutions to a given problem. This paper deals primarily with the development of a simplified compliant-mechanism type-synthesis methodology that limits the number of design solutions considered. The techniques are derived by modifying existing compliant mechanism type-synthesis techniques to yield a simpler model with greater pragmatic value.

Sign in / Sign up

Export Citation Format

Share Document