The Squeezing of a Fluid Between Two Plates

1976 ◽  
Vol 43 (4) ◽  
pp. 579-583 ◽  
Author(s):  
C.-Y. Wang
Keyword(s):  
Differential Equation ◽  
Ordinary Differential Equation ◽  
Viscous Fluid ◽  
Stokes Equations ◽  
Nonlinear Ordinary Differential Equation ◽  
Similarity Solutions ◽  
Navier Stokes ◽  
Normal Velocity ◽  
Parallel Plates ◽  
Navier Stokes Equations

A viscous fluid lies between two parallel plates which are being squeezed or separated. If the normal velocity is proportional to (1 − αt)−1/2 the unsteady Navier-Stokes equations admit similarity solutions. The resulting nonlinear ordinary differential equation is governed by a parameter S which characterizes unsteadiness. Asymptotic solutions for small S and for large positive S are found which compare well with those obtained by numerical integration. It is found that the resistance is proportional to (1 − αt)−2 but is not necessarily opposite to the direction of motion.

scholarly journals CENTRIFUGAL DESTABILIZATION AND RESTABILIZATION OF PLANE SHEAR FLOWS

1996 ◽  
Vol 06 (02) ◽  
pp. 409-413
Author(s):  
A. J. CONLEY
Keyword(s):  
Viscous Fluid ◽  
Linear Stability ◽  
Stokes Equations ◽  
Path Following ◽  
Incompressible Viscous Fluid ◽  
Navier Stokes ◽  
Parallel Plates ◽  
Plane Shear ◽  
Navier Stokes Equations ◽  
Spectral Techniques

The flow of an incompressible viscous fluid between parallel plates becomes unstable when the plates are tumbled. As the tumbling rate increases, the flow restabilizes. This phenomenon is elucidated by path-following techniques. The solution of the Navier-Stokes equations is approximated by spectral techniques. The linear stability of these solutions is studied.

scholarly journals An Axisymmetric Squeezing Fluid Flow between the Two Infinite Parallel Plates in a Porous Medium Channel

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
S. Islam ◽  
Hamid Khan ◽  
Inayat Ali Shah ◽  
Gul Zaman
Keyword(s):  
Differential Equation ◽  
Porous Medium ◽  
Fluid Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Parallel Plates ◽  
Transform Method ◽  
Navier Stokes Equations ◽  
Differential Transform ◽  
Fluid Parameters

The flow between two large parallel plates approaching each other symmetrically in a porous medium is studied. The Navier-Stokes equations have been transformed into an ordinary nonlinear differential equation using a transformationψ(r,z)=r2F(z). Solution to the problem is obtained by using differential transform method (DTM) by varying different Newtonian fluid parameters and permeability of the porous medium. Result for the stream function is presented. Validity of the solutions is confirmed by evaluating the residual in each case, and the proposed scheme gives excellent and reliable results. The influence of different parameters on the flow has been discussed and presented through graphs.

scholarly journals Analytic Approximate Solutions for Unsteady Two-Dimensional and Axisymmetric Squeezing Flows between Parallel Plates

2008 ◽  
Vol 2008 ◽  
pp. 1-13 ◽  
Author(s):  
Mohammad Mehdi Rashidi ◽  
Hamed Shahmohamadi ◽  
Saeed Dinarvand
Keyword(s):  
Fourth Order ◽  
Order Differential Equation ◽  
Stokes Equations ◽  
Approximate Solutions ◽  
Similarity Solutions ◽  
Navier Stokes ◽  
Parallel Plates ◽  
Analysis Method ◽  
Navier Stokes Equations ◽  
Homotopy Analysis

The flow of a viscous incompressible fluid between two parallel plates due to the normal motion of the plates is investigated. The unsteady Navier-Stokes equations are reduced to a nonlinear fourth-order differential equation by using similarity solutions. Homotopy analysis method (HAM) is used to solve this nonlinear equation analytically. The convergence of the obtained series solution is carefully analyzed. The validity of our solutions is verified by the numerical results obtained by fourth-order Runge-Kutta.

Internal laminar flow

2018 ◽  
Author(s):  
Marcel Escudier
Keyword(s):  
Poiseuille Flow ◽  
Stokes Equations ◽  
Circular Cross Section ◽  
Navier Stokes ◽  
Parallel Plates ◽  
Concentric Cylinder ◽  
Navier Stokes Equations ◽  
Concentric Cylinders ◽  
Constant Viscosity ◽  
Pressure Driven Flow

In this chapter it is shown that solutions to the Navier-Stokes equations can be derived for steady, fully developed flow of a constant-viscosity Newtonian fluid through a cylindrical duct. Such a flow is known as a Poiseuille flow. For a pipe of circular cross section, the term Hagen-Poiseuille flow is used. Solutions are also derived for shear-driven flow within the annular space between two concentric cylinders or in the space between two parallel plates when there is relative tangential movement between the wetted surfaces, termed Couette flows. The concepts of wetted perimeter and hydraulic diameter are introduced. It is shown how the viscometer equations result from the concentric-cylinder solutions. The pressure-driven flow of generalised Newtonian fluids is also discussed.

scholarly journals Dynamic analysis of submerged microscale plates: the effects of acoustic radiation and viscous dissipation

2016 ◽  
Vol 472 (2187) ◽  
pp. 20150728 ◽  
Author(s):  
Zhangming Wu ◽  
Xianghong Ma
Keyword(s):  
Viscous Fluid ◽  
Boundary Conditions ◽  
Viscous Dissipation ◽  
Stokes Equations ◽  
Acoustic Radiation ◽  
Navier Stokes ◽  
Rectangular Plates ◽  
Fluid Loading ◽  
Navier Stokes Equations ◽  
Loading Impedance

The aim of this paper is to study the dynamic characteristics of micromechanical rectangular plates used as sensing elements in a viscous compressible fluid. A novel modelling procedure for the plate–fluid interaction problem is developed on the basis of linearized Navier–Stokes equations and no-slip conditions. Analytical expression for the fluid-loading impedance is obtained using a double Fourier transform approach. This modelling work provides us an analytical means to study the effects of inertial loading, acoustic radiation and viscous dissipation of the fluid acting on the vibration of microplates. The numerical simulation is conducted on microplates with different boundary conditions and fluids with different viscosities. The simulation results reveal that the acoustic radiation dominates the damping mechanism of the submerged microplates. It is also proved that microplates offer better sensitivities (Q-factors) than the conventional beam type microcantilevers being mass sensing platforms in a viscous fluid environment. The frequency response features of microplates under highly viscous fluid loading are studied using the present model. The dynamics of the microplates with all edges clamped are less influenced by the highly viscous dissipation of the fluid than the microplates with other types of boundary conditions.

Numerical Prediction of Impact-Related Wave Loads on Ships

2006 ◽  
Vol 129 (1) ◽  
pp. 39-47 ◽  
Author(s):  
Thomas E. Schellin ◽  
Ould el Moctar
Keyword(s):  
Stokes Equations ◽  
Numerical Procedure ◽  
Navier Stokes ◽  
Ship Motions ◽  
Normal Velocity ◽  
Wave Loads ◽  
Navier Stokes Equations ◽  
Critical Areas ◽  
Strip Theory ◽  
A Chain

We present a numerical procedure to predict impact-related wave-induced (slamming) loads on ships. The procedure was applied to predict slamming loads on two ships that feature a flared bow with a pronounced bulb, hull shapes typical of modern offshore supply vessels. The procedure used a chain of seakeeping codes. First, a linear Green function panel code computed ship responses in unit amplitude regular waves. Ship speed, wave frequency, and wave heading were systematically varied to cover all possible combinations likely to cause slamming. Regular design waves were selected on the basis of maximum magnitudes of relative normal velocity between ship critical areas and wave, averaged over the critical areas. Second, a nonlinear strip theory seakeeping code determined ship motions under design wave conditions, thereby accounting for the nonlinear pressure distribution up to the wave contour and the frequency dependence of the radiation forces (memory effect). Third, these nonlinearly computed ship motions constituted part of the input for a Reynolds-averaged Navier–Stokes equations code that was used to obtain slamming loads. Favorable comparison with available model test data validated the procedure and demonstrated its capability to predict slamming loads suitable for design of ship structures.

scholarly journals Modelling and Analysis of Complex Viscous Fluid in Thin Elastic Tubes

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Yufang Gao ◽  
Zongguo Zhang
Keyword(s):  
Cardiovascular Disease ◽  
Blood Flow ◽  
Viscous Fluid ◽  
Boussinesq Equation ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Viscous Term ◽  
Thin Tube ◽  
Elastic Tubes

Cardiovascular disease is a major threat to human health. The study on the pathogenesis and prevention of cardiovascular disease has received special attention. In this paper, we have contributed to the derivation of a mathematical model for the nonlinear waves in an artery. From the Navier–Stokes equations and continuity equation, the vorticity equation satisfied by the blood flow is established. And based on the multiscale analysis and perturbation method, a new model of the Boussinesq equation with viscous term is derived to describe the propagation of a viscous fluid through a thin tube. In order to be more consistent with the flow of the fluid, the time-fractional Boussinesq equation with viscous term is deduced by employing the semi-inverse method and the fractional variational principle. Moreover, the approximate analytical solution of the fractional equation is obtained, and the effect of viscosity on the amplitude and width of the wave is studied. Finally, the effects of the fractional order parameters and vessel radius on blood flow volume are discussed and analyzed.

Similarity Solutions for the Interaction of a Potential Vortex With Free Stream Sink Flow and a Stationary Surface

1974 ◽  
Vol 96 (1) ◽  
pp. 49-54 ◽  
Author(s):  
J. A. Hoffmann
Keyword(s):  
Boundary Layer ◽  
Differential Equations ◽  
Free Stream ◽  
Stokes Equations ◽  
Similarity Solutions ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Stationary Surface ◽  
Direct Numerical Integration ◽  
Potential Vortex

Similarity equations, using an assumed transformation which reduces the partial differential equations to sets of ordinary differential equations, are obtained from the boundary layer and the complete Navier-Stokes equations for the interaction of vortex flows with free stream sink flows and a stationary surface. Solutions to the boundary layer equations for the case of the potential vortex that satisfy the prescribed boundary conditions are shown to be nonexistent using the assumed transformation. Direct numerical integration is used to obtain solutions to the complete Navier-Stokes equations under a potential vortex with equal values of tangential and radial free stream velocities. Solutions are found for Reynolds numbers up to 2.0.

scholarly journals Analytic Comparison of MHD Squeezing Flow in Porous Medium with Slip Condition

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Inayat Ullah ◽  
M. T. Rahim ◽  
Hamid Khan ◽  
Mubashir Qayyum
Keyword(s):  
Porous Medium ◽  
Stokes Equations ◽  
Adomian Decomposition Method ◽  
Nonlinear Ordinary Differential Equation ◽  
Navier Stokes ◽  
Squeezing Flow ◽  
Parallel Plates ◽  
Transform Method ◽  
Slip Boundary ◽  
Adomian Decomposition

The aim of this paper is to compare the efficiency of various techniques for squeezing flow of an incompressible viscous fluid in a porous medium under the influence of a uniform magnetic field squeezed between two large parallel plates having slip boundary. Fourth-order nonlinear ordinary differential equation is obtained by transforming the Navier-Stokes equations. Resulting boundary value problem is solved using Differential Transform Method (DTM), Daftardar Jafari Method (DJM), Adomian Decomposition Method (ADM), Homotopy Perturbation Method (HPM), and Optimal Homotopy Asymptotic Method (OHAM). The problem is also solved numerically using Mathematica solver NDSolve. The residuals of the problem are used to compare and analyze the efficiency and consistency of the abovementioned schemes.

Similarity solutions for viscous vortex cores

1992 ◽  
Vol 238 ◽  
pp. 487-507 ◽  
Author(s):  
Ernst W. Mayer ◽  
Kenneth G. Powell
Keyword(s):  
Numerical Solutions ◽  
Stokes Equations ◽  
Axial Flow ◽  
Similarity Solutions ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
The Core ◽  
Axial Pressure Gradient ◽  
Self Similar ◽  
Similar Solutions

Results are presented for a class of self-similar solutions of the steady, axisymmetric Navier–Stokes equations, representing the flows in slender (quasi-cylindrical) vortices. Effects of vortex strength, axial gradients and compressibility are studied. The presence of viscosity is shown to couple the parameters describing the core growth rate and the external flow field, and numerical solutions show that the presence of an axial pressure gradient has a strong effect on the axial flow in the core. For the viscous compressible vortex, near-zero densities and pressures and low temperatures are seen on the vortex axis as the strength of the vortex increases. Compressibility is also shown to have a significant influence upon the distribution of vorticity in the vortex core.

Sign in / Sign up

Export Citation Format

Share Document