Improvement of a Reduced Torsional Model by Means of Parameter Identification

1989 ◽  
Vol 111 (1) ◽  
pp. 17-26 ◽  
Author(s):  
P. Schwibinger ◽  
R. Nordmann
Keyword(s):  
Finite Element ◽  
Mechanical Model ◽  
Degrees Of Freedom ◽  
Short Circuit ◽  
Original System ◽  
Element Model ◽  
The Finite Element Method ◽  
System A ◽  
Reduction Methods ◽  
Short Circuits

Turbogenerator sets in operation may be excited to transient torsional vibrations by dynamic electrical moments at the generator due to short-circuits or faulty synchronization. For the solution of the torsional vibration problem it is essential to find an appropriate torsional model of the original system. A common approach is to model the torsional system finely by the finite element method which normally results in a very accurate mechanical model with many degrees of freedom (DOF). However for some applications it is desirable to have a torsional model with a reduced number of DOF which reproduces the original system exactly only in the lower eigenfrequencies and modes. This paper describes a method which allows finding a most accurate reduced torsional model with discrete masses and springs from a finite element model with many DOF. The results for the eigenfrequencies, the modes, and internal moments due to a short-circuit excitation of a 600 MW turbogenerator set are presented. They are compared with other reduction methods.

scholarly journals Comparative Study of Blades Reduced Order Models With Geometrical Nonlinearities and Contact Interfaces

2020 ◽  
Author(s):  
Elise Delhez ◽  
Florence Nyssen ◽  
Jean-Claude Golinval ◽  
Alain Batailly
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Performance Indicator ◽  
Element Model ◽  
Reduced Order Models ◽  
Computationally Efficient ◽  
Reduced Order ◽  
Reduction Methods ◽  
Blade Tip ◽  
Reduced Space

Abstract This paper investigates the use of different model reduction methods accounting for geometric nonlinearities. These methods are adapted to retain physical degrees-of-freedom in the reduced space in order to ease contact treatment. These reduction methods are applied to a 3D finite element model of an industrial compressor blade (NASA rotor 37). In order to compare the different reduction methods, a scalar indicator is defined. This performance indicator allows to quantify the accuracy of the predicted displacement both locally (at the blade tip) and globally. The robustness of each method with respect to variations of the external excitation is also assessed. The performances of the reduction methods are then compared in the case of frictional contact between the blade tip and the surrounding casing. This work brings evidence that reduced order models provide a computationally efficient alternative to full order finite element models for the accurate prediction of the time response of structures with both distributed and localized nonlinearities.

Torsional Vibrations in Turbogenerators Due to Network Disturbances

1990 ◽  
Vol 112 (3) ◽  
pp. 312-320 ◽  
Author(s):  
P. Schwibinger ◽  
R. Nordmann
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Degrees Of Freedom ◽  
Element Model ◽  
Torsional Vibrations ◽  
The Finite Element Method ◽  
The Past ◽  
Turbine Generators ◽  
The Finite Element Model

Large steam-turbine generators in operation may be stimulated to torsional vibrations by dynamic moments at the generator due to electrical system transients. The induced torsional stresses in the shaft have drawn growing attention over the past few years. To solve the torsional vibration problem the turbogenerator shaft is modelled by the finite element method. This paper presents the results for a 600 MW turbogenerator set. To verify the quality of the used finite element model measurements were carried out and compared with the analytical results. For some applications it is desirable to have a torsional model with a reduced number of degrees of freedom, which reproduces the finite element model only in the lower eigenfrequencies and modes. This paper describes a method on how to find the most accurate reduced torsional model with discrete masses and springs from the finite element model.

scholarly journals Virtual Detection of Mechanically Induced Short Circuits in a Cylindrical Lithium-Ion Battery Cell Based on Finite Element Simulation

Batteries ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 79
Author(s):  
Klemens Jantscher ◽  
Christoph Breitfuß ◽  
Martin Miklau ◽  
Khaled Ismail ◽  
Peter Dobusch
Keyword(s):  
Finite Element ◽  
Short Circuit ◽  
Lithium Ion ◽  
Element Model ◽  
Test Results ◽  
Battery Cell ◽  
Simulation Techniques ◽  
Element Simulation ◽  
Short Circuits ◽  
Short Circuit Analysis

Lithium-ion batteries (LIBs) are commonly used in today’s electric vehicles. Studying their behaviour under mechanical loading, including short circuits, is vital for vehicle safety. This paper covers three major topics, (1) a general literature review for the state-of-the-art of LIBs, (2) physical cell tests for model validation are performed, wherein the occurrence of short circuits is detected and (3) creating a finite element model (FEM) of an 18650 cylindrical LIB using the most recent testing and simulation techniques. A variety of short-circuit criteria based on stresses, strains and geometric parameters have been implemented in the simulation and compared to the test results. It will be demonstrated that a combination of two geometric criteria, in the radial and axial directions of the cell, is best suited for virtual short-circuit detection in the simulation. Finally, the short-circuit criteria are implemented in a post-processing tool that allows fast short-circuit analysis of cells of different loadings. In the future, this method of short-circuit detection will be used to analyse an assembly of several battery cells such as, for instance, an automotive or maritime battery pack. Furthermore, the developed method enables mechanical integration with respect to crash safety in vehicles.

Coupling Methods for a Flexible Adaptive Finite Element Modeling

2009 ◽  
Author(s):  
Corinna Barthel ◽  
Ulrich Gabbert
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Degrees Of Freedom ◽  
Element Model ◽  
Adaptive Finite Element ◽  
The Finite Element Method ◽  
Virtual Engineering ◽  
Coupling Methods ◽  
Adaptation Procedure ◽  
Complex Structural

The qualified application of the finite element method as an important tool in the virtual engineering design process requires extensive methodological skills, competence and experience of the design engineer. There is no relevant support provided by commercial software tools. In the recent past several ideas have been proposed and tested in order to implement error controlled dimensional and model adaptivity techniques in combination with h- or p-refinement strategies. For deriving a finite element model with less degrees of freedom for time domain simulation the model adaptivity as well as the dimension adaptivity can be utilized. The application of such error controlled modeling techniques leads to finite element models consisting of domains with different local meshes and a combination of different model dimensions, such as beams, plates, shells and 3D continua. These domains have to be coupled to gain a holistic finite element model for the simulation of the local as well as the global behaviour of a system. There are different coupling methods available, each resulting in more or less additional errors, which have to be taken into account. In the paper several methods for coupling of different domains of a complex structural system are presented. They are tested with regard to their quality and their suitability in an error controlled model adaptation procedure.

Rolling Resistance Calculation Procedure Using the Finite Element Method

2019 ◽  
Vol 48 (3) ◽  
pp. 224-248
Author(s):  
Pablo N. Zitelli ◽  
Gabriel N. Curtosi ◽  
Jorge Kuster
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Rolling Resistance ◽  
Element Model ◽  
The Finite Element Method ◽  
Temperature Changes ◽  
Rubber Compounds ◽  
Different Temperatures ◽  
Materials Used ◽  
Account Temperature

ABSTRACT Tire engineers are interested in predicting rolling resistance using tools such as numerical simulation and tests. When a car is driven along, its tires are subjected to repeated deformation, leading to energy dissipation as heat. Each point of a loaded tire is deformed as the tire completes a revolution. Most energy dissipation comes from the cyclic loading of the tire, which causes the rolling resistance in addition to the friction force in the contact patch between the tire and road. Rolling resistance mainly depends on the dissipation of viscoelastic energy of the rubber materials used to manufacture the tires. To obtain a good rolling resistance, the calculation method of the tire finite element model must take into account temperature changes. It is mandatory to calibrate all of the rubber compounds of the tire at different temperatures and strain frequencies. Linear viscoelasticity is used to model the materials properties and is found to be a suitable approach to tackle energy dissipation due to hysteresis for rolling resistance calculation.

scholarly journals A Finite Element Approach to the Analysis of Rotating Bladed-Disk Assemblies Coupled With Flexible Shaft

1994 ◽  
Author(s):  
Wen Zhang ◽  
Wenliang Wang ◽  
Hao Wang ◽  
Jiong Tang
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Coupled System ◽  
Equation Of Motion ◽  
Coupled Systems ◽  
The Finite Element Method ◽  
Bladed Disk ◽  
Modal Synthesis ◽  
Element Approach ◽  
Final Equation

A method for dynamic analysis of flexible bladed-disk/shaft coupled systems is presented in this paper. Being independant substructures first, the rigid-disk/shaft and each of the bladed-disk assemblies are analyzed separately in a centrifugal force field by means of the finite element method. Then through a modal synthesis approach the equation of motion for the integral system is derived. In the vibration analysis of the rotating bladed-disk substructure, the geometrically nonlinear deformation is taken into account and the rotationally periodic symmetry is utilized to condense the degrees of freedom into one sector. The final equation of motion for the coupled system involves the degrees of freedom of the shaft and those of only one sector of each of the bladed-disks, thereby reducing the computer storage. Some computational and experimental results are given.

Analysis of Hydroelectric Unit’s Upper Bracket Based on Test and FEM

2014 ◽  
Vol 721 ◽  
pp. 131-134
Author(s):  
Mi Mi Xia ◽  
Yong Gang Li
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Element Model ◽  
The Finite Element Method ◽  
Ansys Software ◽  
Element Analysis ◽  
Hydroelectric Unit ◽  
The Finite Element Analysis ◽  
Strain Rosette ◽  
The Finite Element Model

To research the load upper bracket of Francis hydroelectric unit, then established the finite-element model, and analyzed the structure stress of 7 operating condition points with the ANSYS software. By the strain rosette test, acquired the data of stress-strain in the area of stress concentration of the upper bracket. The inaccuracy was considered below 5% by analyzing the contradistinction between the finite-element analysis and the test, and match the engineering precision and the test was reliable. The finite-element method could be used to judge the stress of the upper bracket, and it could provide reference for the Structural optimization and improvement too.

Investigation on the shaft voltage generation of large synchronous turboalternators

2020 ◽  
Vol 39 (5) ◽  
pp. 1145-1156
Author(s):  
Kevin Darques ◽  
Abdelmounaïm Tounzi ◽  
Yvonnick Le-menach ◽  
Karim Beddek
Keyword(s):  
Finite Element ◽  
Design Methodology ◽  
Short Circuit ◽  
Element Model ◽  
Stator Winding ◽  
Content Type ◽  
Voltage Generation ◽  
The Impact ◽  
Investigation Process ◽  
Circulating Currents

Purpose This paper aims to go deeper on the analysis of the shaft voltage of large turbogenerators. The main interest of this study is the investigation process developed. Design/methodology/approach The analysis of the shaft voltage because of several defects is based on a two-dimensional (2D) finite element modeling. This 2D finite element model is used to determine the shaft voltage because of eccentricities or rotor short-circuit. Findings Dynamic eccentricities and rotor short circuit do not have an inherent impact on the shaft voltage. Circulating currents in the stator winding because of defects impact the shaft voltage. Originality/value The original value of this paper is the investigation process developed. This study proposes to quantify the impact of a smooth stator and then to explore the contribution of the real stator winding on the shaft voltage.

scholarly journals Numerical investigation of the effects of unsupported railway sleepers on train-induced environmental vibrations

2017 ◽  
Vol 36 (2) ◽  
pp. 160-176 ◽  
Author(s):  
Seyed-Ali Mosayebi ◽  
Morteza Esmaeili ◽  
Jabbar-Ali Zakeri
Keyword(s):  
Finite Element ◽  
Element Model ◽  
Two Dimensions ◽  
Railway Track ◽  
Sensitivity Analyses ◽  
Regression Equations ◽  
The Finite Element Method ◽  
Technical Literature ◽  
Support Force ◽  
Comparison Of The Results

Review of technical literature regarding to train-induced vibrations shows that the effects of unsupported railway sleepers on this issue have been less investigated. So, the present study was devoted to numerical investigations of the mentioned issue. In this regard, first the problem of longitudinal train–track dynamic interaction was simulated in two dimensions by using the finite element method and the developed model was validated through comparison of the results with those obtained by previous researchers. In the next stage, a series of sensitivity analyses were accomplished to account for the effects of value of gap beneath the unsupported sleeper(s) and the track support stiffness on increasing the sleeper displacement and track support force. Moreover, the raised sleeper support force was introduced as applied load to a two-dimensional plane strain finite element model of track in lateral section and consequently the train-induced vibrations were assessed. As a result, a series of regression equations were established between the peak particle velocity in the surrounding environment of railway track and the sleeper support stiffness for tracks without unsupported sleepers and with one and two unsupported sleepers.

scholarly journals COMPARISON OF SAW BLADE NATURAL FREQUENCIES AND CRITICAL SPEEDS USING CSAW AND FINITE ELEMENT ANALYSIS

2011 ◽  
Author(s):  
J. Poirier ◽  
P. Radziszewski
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Natural Frequencies ◽  
Element Model ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Saw Blade ◽  
Circular Saws ◽  
The Finite Element Model ◽  
Element Method

The natural frequencies of circular saws limit the operating speeds of the saws. Current industry methods of increasing natural frequency include pretensioning, where plastic deformation is induced into the saw. To better model the saw, the finite element model is compared to current software for steel saws; C-SAW, a software program that calculates frequencies for stiffened circular saws. Using C-SAW and the finite element method the results are compared and the finite element method is validated for steel saws.

Sign in / Sign up

Export Citation Format

Share Document