High Amplitude Sound Propagation at Low Frequencies in a Flow Duct Lined With Resonators: A Time Domain Solution

1988 ◽  
Vol 110 (4) ◽  
pp. 545-551 ◽  
Author(s):  
A. Cummings ◽  
I.-J. Chang
Keyword(s):  
Time Domain ◽  
Internal Combustion Engines ◽  
Sound Propagation ◽  
Sound Field ◽  
High Amplitude ◽  
Combustion Engines ◽  
Low Frequencies ◽  
The Time Domain ◽  
Flow Duct ◽  
Good Agreement

A quasi one-dimensional analysis of sound transmission in a flow duct lined with an array of nonlinear resonators is described. The solution to the equations describing the sound field and the hydrodynamic flow in the neighborhood of the resonator orifices is performed numerically in the time domain, with the object of properly accounting for the nonlinear interaction between the acoustic field and the resonators. Experimental data are compared to numerical computations in the time domain and generally very good agreement is noted. The method described here may readily be extended for use in the design of exhaust mufflers for internal combustion engines.

Research on the Static and Dynamics Characteristics of Soft Yoke Mooring System Based on Multi-Rigid Body Interaction

2020 ◽  
Author(s):  
Hongwei Wang ◽  
Zizhao Zhang ◽  
Gang Ma ◽  
Rongtai Ma ◽  
Jie Yang
Keyword(s):  
Time Domain ◽  
Rigid Bodies ◽  
Coupled Analysis ◽  
Mooring System ◽  
Accurate Analysis ◽  
Restoring Force ◽  
Stiffness Characteristics ◽  
The Time Domain ◽  
Multi Body ◽  
Good Agreement

Abstract Select the common mooring system-soft yoke mooring system as the research object. The soft yoke mooring system is regarded as a structure composed of multiple rigid bodies, and the theoretical analysis of multi-body dynamics is used to discuss the interaction of multi-rigid bodies. The classical HYSY113 FPSO is selected as an example, for the soft yoke mooring system, the stiffness characteristics and static restoring force curved compared with those of software OrcaFlex, and they are in good agreement, which verify the reliability of the formula derived, and it is a prerequisite for the accurate simulations in further steps. Coupled analysis to the whole system in time domain is also carried out both in OrcaFlex and AQWA, and the representative response of the FPSO under different environmental conditions is compared, the results are consistent well with each other. It is a good reference for the future study in this field. Good static characteristics are a prerequisite for accurate analysis of time-domain motion. By comparing the results in the time domain, it is found that under the same working conditions, the analysis results calculated by different commercial software (AQWA and OrcaFlex) may be different. We need to perform design analysis based on the characteristics of the software.

Sound Field Prediction and Separation in a Moving Medium Using the Time-Domain Equivalent Source Method

2017 ◽  
Vol 103 (3) ◽  
pp. 401-410 ◽  
Author(s):  
Zhao-Huan Wang ◽  
Chuan-Xing Bi ◽  
Xiao-Zheng Zhang ◽  
Yong-Bin Zhang
Keyword(s):  
Time Domain ◽  
Sound Field ◽  
Moving Medium ◽  
Equivalent Source ◽  
Source Method ◽  
The Time Domain ◽  
Equivalent Source Method

scholarly journals Time-domain observation and synthesis of split spheroidal and torsional free oscillations of the 1960 chilean earthquake: Preliminary results

1978 ◽  
Vol 68 (2) ◽  
pp. 325-332 ◽  
Author(s):  
Seth Stein ◽  
Robert J. Geller
Keyword(s):  
Time Domain ◽  
Normal Modes ◽  
Wave Form ◽  
Central Frequency ◽  
Complex Wave ◽  
Location Depth ◽  
The Time Domain ◽  
Theoretical Results ◽  
Good Agreement ◽  
Chilean Earthquake

Abstract The rotationally and elliptically split normal modes of the earth are observed for the 1960 Chilean earthquake by analysis in the time domain. One hundred and fifty hours of the Isabella, California, strain record are narrow band filtered about the central frequency of each split multiplet to isolate the complex wave form resulting from the interference of the different singlets. We compute synthetic seismograms using our previous theoretical results, which show the dependence of the amplitude and phase of the singlets on source location, depth, mechanism, and the position of the receiver. By comparing these synthetics to the filtered record, we conclusively demonstrate the splitting of modes whose splitting had not been definitely resolved: torsional modes (0T3, 0T4) and spheroidal modes (0S4, 0S5). The splitting of 0S2 and 0S3 is reconfirmed. We obtain good agreement between the synthetics and the filtered data for a source mechanism (previously determined from long-period surface waves) of thrust motion on a shallow dipping fault.

Time domain waveform inversion—A frequency domain view: How well we need to match waveforms?

1991 ◽  
Vol 81 (6) ◽  
pp. 2351-2370
Author(s):  
Zoltan A. Der ◽  
Robert H. Shumway ◽  
Michael R. Hirano
Keyword(s):  
Time Domain ◽  
High Frequency ◽  
Waveform Inversion ◽  
Quantitative Measure ◽  
Domain Modeling ◽  
Low Frequencies ◽  
Waveform Modeling ◽  
Time Domain Modeling ◽  
Frequency Components ◽  
The Time Domain

Abstract Waveform modeling in the time domain matches the various frequency components of seismic signals unevenly; the agreement is better at low frequencies and becomes progressively worse towards higher frequencies. The net effect of this kind of time-domain modeling is that the resolution in the spatial details of the source is less than optimal since the high-frequency components of the signal with their short wavelengths to resolve finer details do not fit the data. These problems are demonstrated by numerical simulations and by the reanalysis of some aspects of the El Golfo earthquake in using a new seismic imaging technique based on a generalization of an f-k algorithm. This procedure computes a statistic that can be used to derive confidence limits of the parameters sought in the inversion, thus providing a quantitative measure of the uncertainties in the results.

scholarly journals Solids Content of Black Liquor Measured by Online Time-Domain NMR

2019 ◽  
Vol 9 (10) ◽  
pp. 2169 ◽  
Author(s):  
Ekaterina Nikolskaya ◽  
Petri Janhunen ◽  
Mikko Haapalainen ◽  
Yrjö Hiltunen
Keyword(s):  
Time Domain ◽  
Black Liquor ◽  
Pulp Mill ◽  
Temperature Correction ◽  
Industrial Environment ◽  
Spin Relaxation Rate ◽  
Recovery Unit ◽  
Solids Content ◽  
The Time Domain ◽  
Good Agreement

Black liquor, a valuable by-product of the pulp production process, is used for the recovery of chemicals and serves as an energy source for the pulp mill. Before entering the recovery unit, black liquor runs through several stages of evaporation, wherein the solids content (SC) can be used to control the evaporation effectiveness. In the current study, the time-domain nuclear magnetic resonance (TD-NMR) technique was applied to determine the SC of black liquor. The TD-NMR system was modified for flowing samples, so that the black liquor could be pumped through the system, followed by the measurement of the spin-spin relaxation rate, R2. A temperature correction was also applied to reduce deviations in the R2 caused by the sample temperature. The SC was calculated based on a linear model between the R2 and the SC values determined gravimetrically, where good agreement was shown. The online TD-NMR system was tested at a pulp mill for the SC estimation of weak black liquor over seven days without any fouling, which demonstrated the feasibility of the method in a harsh industrial environment. Therefore, the potential of the TD-NMR technology as a technique for controlling the black liquor evaporation process was demonstrated.

Nonlinear modeling, time-domain analysis and simulation of non-Foster elements

2016 ◽  
Vol 9 (4) ◽  
pp. 747-755
Author(s):  
Hamed Khoshniyat ◽  
Abdolali Abdipour ◽  
Gholamreza Moradi
Keyword(s):  
Time Domain ◽  
Linear Time ◽  
Nonlinear Modeling ◽  
Current Source ◽  
Time Domain Analysis ◽  
Circuit Performance ◽  
Modeling Analysis ◽  
The Stability ◽  
The Time Domain ◽  
Good Agreement

In this paper, the structure of a common field-effect transistor (FET)-based negative impedance converter (NIC) that behaves as a negative capacitor is presented. The nonlinear modeling, analysis, and simulation of this non-Foster structure are presented in the time domain and the transient response of the circuit can be used to study the stability of the circuit. For the analysis of the circuit performance, the linear time-dependent modeling approach is used. This method is based on determination of the circuit parameters at each step according to parameters of the previous steps, bias voltages, and the input signal. Results of the proposed method for analysis of non-Foster circuit are compared with those of nonlinear analysis using commercial software, which shows a good agreement together and the proposed method is validated. Based on the analysis, the nonlinear capacitance of non-Foster circuit is extracted and based on the simple second order model of current source of FET, the analytic model of negative capacitor is extracted and improved by curve fitting. The proposed model results have a good agreement with simulation results of NIC's circuit.

scholarly journals Analysis of Longitudinal Guided Wave Propagation in a Liquid-Filled Pipe Embedded in Porous Medium

2021 ◽  
Vol 11 (5) ◽  
pp. 2281
Author(s):  
Nana Su ◽  
Qingbang Han ◽  
Yu Yang ◽  
Minglei Shan ◽  
Jian Jiang
Keyword(s):  
Porous Medium ◽  
Time Domain ◽  
Saturated Porous Medium ◽  
Guided Wave ◽  
Guided Wave Propagation ◽  
Partial Mode ◽  
The Media ◽  
The Time Domain ◽  
Good Agreement

To study the leakage situation of a liquid-filled pipe in long-term service, a model of a liquid-filled pipe embedded in an infinite porous medium as well as in a finite porous medium is designed. The principal motivation is to perform detailed quantitative analysis of the longitudinal guided wave propagating in a liquid-filled pipe embedded in a saturated porous medium. The problems of pipeline leakage and porosity as well as the media outside the pipe are solved to identify the characteristics of the guided wave in a more practical model. The characteristics of the guided wave are investigated theoretically and numerically, with special emphasis on the influence of porous medium parameters on the dispersion properties. Assuming the pipe is a cylindrical shell buried in an isotropic, homogeneous, and porous medium, the dispersion equations are established based on the elastic-dynamic equations and the modified Biot liquid-saturated porous theory. The characteristics of dispersion, time-domain waveform and attenuation curves varying with porous medium parameters, wrapping layer material, and thickness, are all analyzed. The increase in porosity decreases the partial mode phase velocity in the liquid-filled pipe embedded in the finite porous medium. The characteristics of attenuation are in good agreement with the dispersion curves and the time-domain waveform results.

Sign in / Sign up

Export Citation Format

Share Document