On the Accuracy of Parametric and Classical Spectra

1988 ◽  
Vol 110 (2) ◽  
pp. 213-219 ◽  
Author(s):  
S. Braun ◽  
A. Sneor
Keyword(s):  
Experimental Data ◽  
Spectral Densities ◽  
Random Inputs ◽  
Fourier Methods ◽  
Spectral Estimates ◽  
Power Spectral ◽  
Power Spectral Densities

This work investigates the accuracy of spectral estimates computed via parametric techniques. Comparisons with results obtained via classical Fourier methods are also presented. The PSD’s (power spectral densities) investigated are of the type encountered in low damped structures excited by random inputs. Qualitative results are shown for simulated as well as experimental data. The results substantiate the claims for the smoothness of parametric spectra, but not the improved resolution capabilities.

Analysis of power spectral densities of electrocardiograms

1971 ◽  
Vol 12 (1-2) ◽  
pp. 41-51 ◽  
Author(s):  
Vrudhula K. Murthy ◽  
L. Julian Haywood ◽  
John Richardson ◽  
Robert Kalaba ◽  
Steven Salzberg ◽  
...  
Keyword(s):  
Spectral Densities ◽  
Power Spectral ◽  
Power Spectral Densities

scholarly journals Delta and Theta waves in Super Consciousness Meditation.

2020 ◽  
Author(s):  
Anil Kumar Bheemaiah
Keyword(s):  
Average Power ◽  
Spectral Densities ◽  
Theta Wave ◽  
Convolutional Networks ◽  
Theta Waves ◽  
Power Spectral ◽  
Power Spectral Densities ◽  
Lyapunov Coefficient ◽  
Fmri Time Series ◽  
Power Densities

Study on Kundalini Meditation of Super-conscious Meditation of the Himalayan Tradition and Sahaja Meditation, to determine the average power spectral densities and power ratios of TP9, AF7, AF8, and TP10, electrodes and two ear electrodes on a Muse Headset.These parameters are used to create quantitative criteria to indicate degree of meditation and to create a trigger for bird chirp events.We find an increase in Delta and Theta wave power densities, in the deep meditation state as compared to the initiation and restful states. keywords: Kundalini, super consciousness, neurosky, muse, chakra based meditation, alpha to beta ratio, delta to beta ratio, power spectral densities, differential power spectral densities, fMRi, time series, iD convolutional networks. Lyapunov coefficient

Analysis of earth motions and seismic sources by power spectral density

1969 ◽  
Vol 59 (3) ◽  
pp. 1071-1091
Author(s):  
Dean V. Power
Keyword(s):  
Spectral Density ◽  
Power Spectral Density ◽  
High Explosive ◽  
Peak Velocity ◽  
Test Site ◽  
Nevada Test Site ◽  
Spectral Densities ◽  
Power Spectral ◽  
Power Spectral Densities ◽  
Velocity Spectra

abstract Ground motion records from six high-explosive cratering events in northeastern Montana, ten contained nuclear explosive events at the Nevada Test Site, and motions of an earth-fill dam during the Gasbuggy underground nuclear explosion in New Mexico were analyzed for power spectral density, peak velocity and velocity spectra. The high-explosive events included four 20-ton single charges at depths of burst which varied between 42 to 57 feet, a 140-ton row charge consisting of three 20-ton and two 40-ton charges at optimum cratering depths of burst, and a 0.5-ton charge at the optimum depth of burst. It was found that at these depths and charge weights an increase in depth of burst resulted in an increase in peak velocities and power-spectral densities as measured at distant points (> 5 km). Power spectral density was found to be approximately proportional to the first power of yield. For this region it was determined that power spectral density varied inversely as radial distance to the 3.55 power. Three analysis techniques—peak velocity, velocity spectra and power spectral density—are compared, and it is shown that power spectral density is the most consistent method when comparing records from different measuring stations. An analysis of power-spectral density measured at one station for the ten events at the Nevada Test Site shows that a significant shift in the frequency of the energy in the seismogram occurs when the source location changes. For events in the Yucca Flat area the peak energy at Mercury was consistently at 1.0 Hz, while for events in the Pahute Mesa area this peak occurs at 2.5 Hz. A comparison of the power spectral densities on and near the Navajo Dam revealed that the natural frequencies and first harmonics of the dam are 1.4, 2.0 and 2.5 Hz in the mode where motion is parallel to the canyon axis. A simple model makes use of these frequencies to calculate a shear-wave velocity of 1130 ft/sec. A method of using power spectral density to measure earthquake magnitudes and measure the yield of underground explosions is proposed.

scholarly journals Calculation of the cross and auto power spectral densities for low neutron counting from pulse mode detectors

2019 ◽  
Vol 131 ◽  
pp. 138-147 ◽  
Author(s):  
Alberto Talamo ◽  
Yousry Gohar ◽  
Toshihiro Yamamoto ◽  
Masao Yamanaka ◽  
Cheol Ho Pyeon
Keyword(s):  
Pulse Mode ◽  
Spectral Densities ◽  
Power Spectral ◽  
Power Spectral Densities ◽  
Neutron Counting ◽  
The Cross

scholarly journals Frequency Domain Response of Jacket Platforms under Random Wave Loads

2019 ◽  
Vol 7 (10) ◽  
pp. 328
Author(s):  
Xiaoshuang Han ◽  
Weiliang Qiao ◽  
Bo Zhou
Keyword(s):  
Design Stage ◽  
Response Analysis ◽  
Random Wave ◽  
Preliminary Design ◽  
Wave Loads ◽  
Spectral Densities ◽  
Spectral Moments ◽  
Jacket Platform ◽  
Power Spectral ◽  
Power Spectral Densities

This article presents a procedure that simplifies an offshore jacket platform as a non-uniform cantilever beam subjected to an axial force. A Ritz method combined with a pseudo-excitation method is then used to analyze the responses of the jacket platform under random wave loads with the associated power spectral densities, variances and higher spectral moments. The theoretical basis and pertinent governing equations are derived. The proposed procedure not only eases the process of determining the pseudo wave loads, but also requires only the rudimentary structural details that are typically available at the preliminary design stage. Additionally, the merit of the proposed procedure is that the process does not require one to compute the normal modes, which saves time and is particularly convenient for the dynamic-response analysis of a complex structure (such as an offshore platform). An illustrative example based on a three-deck jacket platform is presented to demonstrate the procedure used to obtain the power spectral densities, variances and second spectral moments of jacket-top displacement and the bending moment of the jacket at the mud line. The results obtained are compared with those obtained using a Finite Element Mothed (FEM) model. Based on the findings of the study and good agreement shown in the comparison of results, it is concluded that the proposed method is effective, simple and convenient, and can be a useful tool for the preliminary design analysis of offshore platforms.

Sign in / Sign up

Export Citation Format

Share Document