High Performance, Solid Desiccant, Open Cooling Cycles

1989 ◽  
Vol 111 (2) ◽  
pp. 176-183 ◽  
Author(s):  
T. S. Kang ◽  
I. L. Maclaine-cross
Keyword(s):  
Low Temperature ◽  
Parametric Study ◽  
Air Conditioning ◽  
High Performance ◽  
Coefficient Of Performance ◽  
Thermal Coefficient ◽  
Temperature Heat ◽  
Advanced Cycles

Solid desiccant, open cooling cycles use low temperature heat efficiently making them attractive for solar air conditioning. Advanced cycles using nearly reversible evaporative coolers have previously been proposed and shown to have high ideal performance. This parametric study shows that, with real components comparable to those used in studies of classical cycles, these open cycles can give more than twice the thermal coefficient of performance of a ventilation cycle.

Experimental Investigation of a Desiccant Wheel Cycle

2012 ◽  
Author(s):  
Ali Al-Alili ◽  
Yunho Hwang ◽  
Reinhard Radermacher
Keyword(s):  
Air Conditioning ◽  
Removal Rate ◽  
Dew Point ◽  
Coefficient Of Performance ◽  
Cycle Performance ◽  
Air Conditioners ◽  
Considerable Portion ◽  
Temperature Heat ◽  
Air Conditioning Systems ◽  
Desiccant Material

In hot and humid regions, removal of moisture from the air represents a considerable portion of the air conditioning load. Conventionally, air conditioning systems have to lower the air temperature below its dew point to accomplish dehumidification. Desiccant air conditioners offer a solution to meet the humidity and temperature requirements of buildings via decoupling latent and sensible loads. In this work, the performance of a new desiccant material is investigated experimentally. This desiccant material can be regenerated using a low temperature heat source, as low as 45°C. It also has a unique S-shape isotherm. The effects of the process air stream’s temperature and humidity, the regeneration temperature, the ventilation mass flow rate, and the desiccant wheel’s rotational speed on the cycle performance are investigated. ARI-humid conditions are used as a baseline and the moisture mass balance is maintained within 5%. The results are presented in terms of the moisture removal rate and latent coefficient of performance (COPlat). The results show a desiccant wheel’s COPlat higher than unity when it is coupled with an enthalpy wheel.

scholarly journals Ultralow-temperature-driven water-based sorption refrigeration enabled by low-cost zeolite-like porous aluminophosphate

2022 ◽  
Vol 13 (1) ◽  
Author(s):  
Zhangli Liu ◽  
Jiaxing Xu ◽  
Min Xu ◽  
Caifeng Huang ◽  
Ruzhu Wang ◽  
...  
Keyword(s):  
Low Temperature ◽  
Water Sorption ◽  
High Performance ◽  
Global Climate ◽  
Low Cost ◽  
Cost Effective ◽  
High Water ◽  
Coefficient Of Performance ◽  
High Efficient ◽  
Water Based

AbstractThermally driven water-based sorption refrigeration is considered a promising strategy to realize near-zero-carbon cooling applications by addressing the urgent global climate challenge caused by conventional chlorofluorocarbon (CFC) refrigerants. However, developing cost-effective and high-performance water-sorption porous materials driven by low-temperature thermal energy is still a significant challenge. Here, we propose a zeolite-like aluminophosphate with SFO topology (EMM-8) for water-sorption-driven refrigeration. The EMM-8 is characterized by 12-membered ring channels with large accessible pore volume and exhibits high water uptake of 0.28 g·g−1 at P/P0 = 0.2, low-temperature regeneration of 65 °C, fast adsorption kinetics, remarkable hydrothermal stability, and scalable fabrication. Importantly, the water-sorption-based chiller with EMM-8 shows the potential of achieving a record coefficient of performance (COP) of 0.85 at an ultralow-driven temperature of 63 °C. The working performance makes EMM-8 a practical alternative to realize high-efficient ultra-low-temperature-driven refrigeration.

scholarly journals Energy Analysis of a Novel Ejector-Compressor Cooling Cycle Driven by Electricity and Heat (Waste Heat or Solar Energy)

2020 ◽  
Vol 12 (19) ◽  
pp. 8178
Author(s):  
Fahid Riaz ◽  
Kah Hoe Tan ◽  
Muhammad Farooq ◽  
Muhammad Imran ◽  
Poh Seng Lee
Keyword(s):  
Low Temperature ◽  
Thermal Energy ◽  
Waste Heat ◽  
Solar Thermal ◽  
Coefficient Of Performance ◽  
Condensation Temperature ◽  
Low Grade ◽  
Solar Thermal Energy ◽  
Temperature Heat ◽  
Vapour Compression

Low-grade heat is abundantly available as solar thermal energy and as industrial waste heat. Non concentrating solar collectors can provide heat with temperatures 75–100 °C. In this paper, a new system is proposed and analyzed which enhances the electrical coefficient of performance (COP) of vapour compression cycle (VCC) by incorporating low-temperature heat-driven ejectors. This novel system, ejector enhanced vapour compression refrigeration cycle (EEVCRC), significantly increases the electrical COP of the system while utilizing abundantly available low-temperature solar or waste heat (below 100 °C). This system uses two ejectors in an innovative way such that the higher-pressure ejector is used at the downstream of the electrically driven compressor to help reduce the delivery pressure for the electrical compressor. The lower pressure ejector is used to reduce the quality of wet vapour at the entrance of the evaporator. This system has been modelled in Engineering Equation Solver (EES) and its performance is theoretically compared with conventional VCC, enhanced ejector refrigeration system (EERS), and ejection-compression system (ECS). The proposed EEVCRC gives better electrical COP as compared to all the three systems. The parametric study has been conducted and it is found that the COP of the proposed system increases exponentially at lower condensation temperature and higher evaporator temperature. At 50 °C condenser temperature, the electrical COP of EEVCRC is 50% higher than conventional VCC while at 35 °C, the electrical COP of EEVCRC is 90% higher than conventional VCC. For the higher temperature heat source, and hence the higher generator temperatures, the electrical COP of EEVCRC increases linearly while there is no increase in the electrical COP for ECS. The better global COP indicates that a small solar collector will be needed if this system is driven by solar thermal energy. It is found that by using the second ejector at the upstream of the electrical compressor, the electrical COP is increased by 49.2% as compared to a single ejector system.

Numerical Simulation of a Desiccant Bed for Solar Air Conditioning Applications

1991 ◽  
Vol 113 (2) ◽  
pp. 80-88 ◽  
Author(s):  
S. Farooq ◽  
D. M. Ruthven
Keyword(s):  
Numerical Simulation ◽  
Cycle Time ◽  
Air Conditioning ◽  
Removal Rate ◽  
Optimal Choice ◽  
Coefficient Of Performance ◽  
Thermal Coefficient ◽  
Moisture Removal ◽  
Cyclic Operation

The cyclic operation of a desiccant bed used for solar air conditioning applications has been simulated numerically. The results suggest that the optimal choice of desiccant is not seriously limited by the shape of the isotherm since the effect of isotherm shape on the moisture removal rate can be adequately compensated by appropriate adjustment of the cycle time. The conditions required to maximize the moisture removal rate for any given degree of nonlinearity also satisfy the requirements for maximizing the thermal coefficient of performance.

scholarly journals System Design of Solar Absorption Cooling : A Case Study in Building of Engineering Physics Department UGM

KnE Energy ◽  
2015 ◽  
Vol 2 (2) ◽  
pp. 22
Author(s):  
Andang Widiharto ◽  
Didit Setyo Pamuji ◽  
Atik Nurul Laila ◽  
Fiki Rahmatika Salis ◽  
Luthfi Zharif ◽  
...  
Keyword(s):  
Global Warming ◽  
Solar Collector ◽  
Air Conditioning ◽  
Cooling System ◽  
Renewable Energy Sources ◽  
Coefficient Of Performance ◽  
Thermal Coefficient ◽  
Solar Absorption ◽  
Absorption Cooling ◽  
Solar Absorption Cooling

<p>Air conditioning (AC) is one of the most building’s energy consumer, included in building of Engineering Physisc’s Departement, Universitas Gadjah Mada (UGM). The declining of fossil fuel reserves and the increasing effects of global warming, forcing the world to switch to renewable energy sources. This paper discusses the design of solar absorption cooling system to replace conventional AC in seven lecture halls of Engineering Physic’s Departement, UGM. There are some steps that have been done to design the solar absorption cooling, i.e. do a study of the potential availability of solar energy, calculate the cooling loads, analyze the thermodynamic process of the system, determine the type of collector to be used and calculate area of solar collector needed. The thermal coefficient of performance (COP) of the system designed was about 0.84 which could use some types of flat plate solar collector with each area corresponding to each efficiency values. </p><p><strong>Keyword</strong> : Air conditioning; global warming; solar absorption cooling; solar collector</p>

Solid desiccant dehumidification-based air-conditioning system for agricultural storage application: Theory and experiments

2019 ◽  
Vol 234 (4) ◽  
pp. 534-547 ◽  
Author(s):  
Muhammad H Mahmood ◽  
Muhammad Sultan ◽  
Takahiko Miyazaki
Keyword(s):  
Air Conditioning ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Coefficient Of Performance ◽  
Postharvest Quality ◽  
Thermal Coefficient ◽  
Humidity Ratio ◽  
Factors Affecting ◽  
Experimental Apparatus ◽  
Quality Of Products

This study experimentally investigates desiccant dehumidification and indirect evaporative cooling for agricultural products' storage. Thermodynamic advantages of the proposed system are highlighted and compared to vapor compression systems. Significance of proposed system is discussed in relation to agricultural storage application. Factors affecting the postharvest quality of products are discussed, and consequently, the psychrometric zones are established for optimum storage. Hydrophilic polymeric sorbent-based desiccant units are used for the experimental investigation. An open-cycle experimental apparatus is setup by which desiccant dehumidification and regeneration processes are analyzed at various conditions. Thereby, a novel correlation is developed by which desiccant dehumidification process can be simulated precisely. The correlation is successfully validated against the experimental data of various conditions. Desiccant air-conditioning cycle is analyzed for two cases (i.e. case-A: dry-bulb temperature = 31 ℃, humidity-ratio = 6 g/kg-DA; and case-B: dry-bulb temperature = 13 ℃, humidity-ratio = 6 g/kg-DA) to investigate the proposed system's applicability for agricultural storage. The results show that the thermal coefficient of performance is highly influenced by ambient air conditions and decreases with the increase in regeneration temperature. The thermal coefficient of performance for case-A is higher as compared to case-B, and for both cases, it increases with the increase in wet-bulb effectiveness of the evaporative cooling unit.

AIR CONDITIONING BY LOW TEMPERATURE HEAT

1988 ◽  
pp. 1008-1012 ◽  
Author(s):  
N. Khelifa ◽  
D. Jung ◽  
E. Lävemann ◽  
R. Sizmann
Keyword(s):  
Low Temperature ◽  
Air Conditioning ◽  
Temperature Heat

Performance analysis of a liquid desiccant system with an adjustable reflux ratio of regeneration solution

2016 ◽  
Vol 38 (1) ◽  
pp. 89-103 ◽  
Author(s):  
Xiaofeng Niu ◽  
Yue Zhang ◽  
Xing Li ◽  
Yan Tong ◽  
Guangli Zhang
Keyword(s):  
Air Conditioning ◽  
Coefficient Of Performance ◽  
Reflux Ratio ◽  
Thermal Coefficient ◽  
System Configuration ◽  
Liquid Desiccant ◽  
Average Growth Rate ◽  
Air Conditioning System ◽  
Average Growth ◽  
Water Condensation

In the liquid desiccant system, the amount of the diluted solution sent to the regenerator has a great influence on the system performance. The liquid desiccant system with an adjustable reflux ratio of regeneration solution was proposed in the paper, and the effect of the solution regeneration reflux ratio on the system performance was analysed by simulation. The energy consumption, the electric coefficient of performance and the thermal coefficient of performance under different water condensation rates and varied solution regeneration reflux ratio were obtained. The results show that, the overall performance of the liquid desiccant system can be improved by reducing the solution regeneration reflux ratio; a 1% decrease in the reflux ratio leads to a 0.56–1.02% average growth rate of electric coefficient of performance and a 0.51–0.95% average growth rate of thermal coefficient of performance. Moreover, when the regeneration temperature is high and the water condensation rate of the process air is low, the improvement from decreasing the solution regeneration reflux ratio is more significant. However, the reflux ratio cannot be reduced to an unlimited extent. There is a rational optimum range of the reflux ratio to achieve high thermal coefficient of performance, the optimum range under low dehumidifying load is different from that under high load. Practical application: The performance of a liquid desiccant system can be improved by the proposed system configuration with an adjustable reflux ratio of regeneration solution, such novel system configuration could be applied for the design of air conditioning system, which is beneficial for the energy saving in building. Moreover, the rational optimum ranges of the reflux ratio to achieve high coefficient of performance under different dehumidifying loads are obtained, which could provide guidelines for the design and operation management of the liquid desiccant based building air conditioning system.

Sign in / Sign up

Export Citation Format

Share Document