scholarly journals Study of Thermal Oscillations at the Dryout Front in Half Heated Tubes

1985 ◽  
Vol 107 (4) ◽  
pp. 343-351
Author(s):  
S. S. Samra ◽  
V. K. Dhir

In this work thermal oscillations at the dryout front in an electrically heated composite tube of inconel and glass have been studied experimentally and analytically. The tube has an inside diameter of 17.2 mm, and a heated length of 1913 mm. The thickness of the inconel half tube is 0.89 mm. In the experiments deionized water and Freon-113 were used as the test liquids while the pressure at the exit of the tube was one atmosphere. The dryout front was established at a predetermined height from the inlet. The frequency and magnitude of the wall temperature oscillations in the vicinity of the dryout front has been obtained from the temperature-time history. The most probable time period obtained from the probability distributions has been correlated with dimensionless groups formed with mass velocity, tube diameter and the physical properties of the test liquid. Normalized probability distributions for the time period have been found to be represented by a modified gamma-distribution. The magnitude and the nature of the temperature oscillations has been predicted by solving the energy equation for the heated tube and the mass conservation equation for the liquid film left on the wall during upward movement of the dryout front. The predictions have been compared with the data.

2001 ◽  
Vol 32 (3) ◽  
pp. 161-180 ◽  
Author(s):  
Kolbjørn Engeland ◽  
Lars Gottschalk ◽  
Lena Tallaksen

Macro-scale hydrological modelling implies a repeated application of a model within an area using regional parameters. These parameters are based on climate and landscape characteristics, and they are used to calculate the water balance in ungauged areas. The regional parameters ought to be robust and not too dependent of the catchment and time period used for calibration. The ECOMAG model is applied for the NOPEX-region as a macro-scale hydrological model distributed on a 2×2 km2 grid. Each model element is assigned parameters according to soil and vegetation classes. A Bayesian methodology is followed. An objective function describing the fit between observed and simulated values is used to describe the likelihood of the parameters. Using Baye's theorem these likelihoods are used to update the probability distributions of the parameters using additional data, being it either an additional year of streamflow or an additional streamflow station. Two sampling methods are used, regular sampling and Metropolis-Hastings sampling. The results show that regional parameters exist according to some predefined criteria. The probability distribution of the parameters shows a decreasing variance as data from new catchments are used for updating. A few parameters do, however, not exhibit this property, and they are therefore not suitable in a regional context.


1991 ◽  
Vol 24 (2) ◽  
pp. 309-314 ◽  
Author(s):  
G. Teutsch ◽  
K. Herbold-Paschke ◽  
D. Tougianidou ◽  
T. Hahn ◽  
K. Botzenhart

In this paper the major processes governing the persistence and underground transport of viruses and bacteria are reviewed in respect to their importance under naturally occurring conditions. In general, the simulation of the governing processes is based on the macroscopic mass-conservation equation with the addition of some filter and/or retardation factor and a decay coefficient, representing the natural “die-off” of the microorganisms. More advanced concepts try to incorporate growth and decay coefficients together with deposition and declogging factors. At present, none of the reported concepts has been seriously validated. Due to the complexity of natural systems and the pathogenic properties of some of the microorganisms, experiments under controlled laboratory conditions are required. A laboratory setup is presented in which a great variety of natural conditions can be simulated. This comprises a set of 1 metre columns and an 8 metre stainless-steel flume with 24 sampling ports. The columns are easily filled and conditioned and therefore used to study the effects of different soil-microorganism combinations under various environmental conditions. In the artificial flume natural underground conditions are simulated using sand and gravel aquifer material from the river Neckar alluvium. A first set of results from the laboratory experiments is presented together with preliminary model simulations. The large variety of observed breakthrough curves and recovery for the bacteria and viruses under investigation demonstrates the great uncertainty encountered in microbiological risk assessment.


Author(s):  
W. S. Affleck

When the ignition of a car engine is switched off, the engine normally comes to rest within a few revolutions but, occasionally, it may continue to fire erratically for a few seconds or longer. This phenomenon is known as run-on and, for the majority of European engines, is the result of spontaneous ignition of the fuel-air mixture in the combustion chamber. Part 1 of this paper describes experiments in a single-cylinder research engine which have been made to establish the principles controlling run-on. In particular the effects of air/fuel ratio, the nature of the fuel and the pressure-temperature-time history of the fuel-air mixture in the combustion chamber have been studied, as it is known that these factors play an important part in spontaneous ignition in experiments in laboratory vessels. From these observations it has been possible to formulate a theoretical model of the run-on process which explains the salient features of the phenomenon. In particular, it shows how the gradual cooling of the engine limits the duration of run-on and also how the duration of run-on may be considered as a measure of the extent to which fuel or engine factors must be altered to eliminate run-on. Part 2 describes the application of these principles to car engines using normal commercial-type fuels. It is concluded that the following are important features in the control of run-on: the use of fuel of sufficiently high Research octane number, minimum opening of throttle at idle, sufficient time for cooling of the combustion chamber before the ignition is switched off, efficient engine cooling, and small valve overlap. Current devices for reducing exhaust emissions are likely, through their effects on these features, to increase the tendency of an engine run-on. Combustion chamber deposits, though, appear to have little influence.


1979 ◽  
Vol 16 (3) ◽  
pp. 505-522 ◽  
Author(s):  
C. E. Keen

The subsidence histories of the Labrador and Nova Scotian rifted continental margins have been determined from biostratigraphic data for 11 deep exploratory wells off Nova Scotia, for five wells off Labrador, for three wells northeast of Newfoundland, and for one well off the northeast coast of the United States of America. The components of subsidence, due to sediment loading, and when possible due to loading by changes in eustatic sea level, were removed, leaving that part of the subsidence, the tectonic subsidence, caused by cooling of the lithosphere or by other deep seated processes. The thermal cooling model theoretically predicts a linear relationship between tectonic subsidence and t½, where t is the time since subsidence began. This relationship should be obeyed during the first tens of Ma of subsidence. The slope of this curve depends upon the temperature to which the crust and upper mantle were heated during the initial rifting stage and can be used to derive the temperature–time history within the sediments, the present temperature distribution, and geothermal gradient. The data show that the observed subsidence curves behave in accordance with the thermal cooling model, at least during the first 80 Ma after subsidence began and obey the equation y = 300(± 80)t1/2 m, where y is the tectonic subsidence. The slopes of the subsidence curves are similar for the Labrador Shelf, the Nova Scotian Shelf, and the shelf off the northeastern U.S.A. More rapid and variable subsidence occurs northeast of Newfoundland and this may be associated, in a way yet to be established, with the anomalous foundered continental crust near the Orphan Knoll and Flemish Cap micro-continents which lie close to this area. After about 80 Ma, the subsidence appears to depart from the linear t1/2 law in a manner similar to the subsidence curves for oceanic crust, but this is not well established by the data. The present temperatures and temperature gradients computed using the slope of the subsidence curves show good agreement with measured values; geothermal gradients of 17.5 °C km−1 and 26 °C km−1 are calculated off Nova Scotia and Labrador respectively, and mean values of about 23 °C km−1 are observed. The computed temperature–time history within the sediments was used to estimate values of vitrinite reflectance, an indicator of the degree of organic metamorphism. These values show reasonable agreement with the measured values and suggest that only the Upper Jurassic and Lower Cretaceous sediments off Nova Scotia and the Paleocene sediments off Labrador are sufficiently mature to be good sources of petroleum. The linear t1/2 behaviour of the subsidence, and the good agreement between predicted and observed temperatures support the contention that cooling is largely responsible for the observed tectonic subsidence. The similarity of results from different areas suggests that the usefulness of the method is not restricted to a particular geographical area and may be applied to other rifted continental margins. Comparisons between the subsidence rates, thermal histories, and crustal structure at rifted margins on a worldwide scale may provide insights concerning the processes controlling their development. The temperature–time histories of the sediments estimated from the subsidence may be useful in establishing the potential of a rifted margin area for petroleum generation when little other information is available.


1998 ◽  
Vol 08 (04) ◽  
pp. 799-803 ◽  
Author(s):  
D. M. Sonechkin

Based on the heat balance equation of the global climate system the well-known surface air temperature time series of the Northern and Southern hemispheres were analyzed as realizations of a fractional Brownian motion. The technique of the so-called wavelet transform was used for this purpose. The technique easily admits splitting time series of interest to statistically stationary oscillations and a trend. Such temperature oscillations were extracted which include within themselves almost all differences between both hemispheric time series. As a result of subtraction of the oscillations from the primary hemispheric series a residual trend-like component was evaluated. The latter evidences a single warming trend of the global climate system that was started from the early 20th century.


2021 ◽  
Author(s):  
Chandra Rupa Rajulapati ◽  
Simon Michael Papalexiou ◽  
Martyn P Clark ◽  
Saman Razavi ◽  
Guoqiang Tang ◽  
...  

<p>Assessing extreme precipitation events is of high importance to hydrological risk assessment, decision making, and adaptation strategies. Global gridded precipitation products, constructed by combining various data sources such as precipitation gauge observations, atmospheric reanalyses and satellite estimates, can be used to estimate extreme precipitation events. Although these global precipitation products are widely used, there has been limited work to examine how well these products represent the magnitude and frequency of extreme precipitation. In this work, the five most widely used global precipitation datasets (MSWEP, CFSR, CPC, PERSIANN-CDR and WFDEI) are compared to each other and to GHCN-daily surface observations. The spatial variability of extreme precipitation events and the discrepancy amongst datasets in predicting precipitation return levels (such as 100- and 1000-year) were evaluated for the time period 1979-2017.  The behaviour of extremes, that is the frequency and magnitude of extreme precipitation, was quantified using indices of the heaviness of the upper tail of the probability distribution. Two parameterizations of the upper tail, the power and stretched-exponential, were used to reveal the probabilistic behaviour of extremes. The analysis shows strong spatial variability in the frequency and magnitude of precipitation extremes as estimated from the upper tails of the probability distributions. This spatial variability is similar to the Köppen-Geiger climate classification. The predicted 100- and 1000-year return levels differ substantially amongst the gridded products, and the level of discrepancy varies regionally, with large differences in Africa and South America and small differences in North America and Europe. The results from this work reveal the shortcomings of global precipitation products in representing extremes. The work shows that there is no single global product that performs best for all regions and climates.</p>


2012 ◽  
Vol 557-559 ◽  
pp. 2208-2216 ◽  
Author(s):  
Wen Bin Li ◽  
Guo Cong Yu ◽  
Bo Tan Liu ◽  
Xi Gang Yuan

A new computational mass transfer model is proposed for simulating the chemical absorption process with heat effect by solving the average fluctuating mass flux in turbulent mass conservation equation and the average fluctuating heat flux in turbulent heat conservation equation, so that the concentration profile and the temperature profile of column can be obtained. The feather of the proposed model is to abandon the conventional way of introducing the unknown turbulent mass transfer diffusivity Dtand the turbulent thermal diffusivity αtin the mass and heat conservation equations. By using the proposed model, the simulated results of CO2absorption by aqueous monoethanolamine (MEA) solution in an industrial scale column is presented, including MEA concentration, CO2loading and liquid phase temperature. The simulations are in agreement with the published experiment data.


2014 ◽  
Vol 670-671 ◽  
pp. 355-364
Author(s):  
Shao Bo Zhang ◽  
Xiao Chun Wang ◽  
Xin Pu Shen

A hydro-thermo-mechanical model was presented for concrete at elevated temperature. Three phases of continuum were adopted in this model: gaseous mixture of water vapor and dry air, liquid water, and solid skeleton of concrete. Mass conservation equations, linear momentum conservation equation, and energy conservation equation were derived on the basis of the macroscopic Navier-Stokes equations for a general continuum, along with assumptions made for the purpose of simplification. Mathematical relationships between selected primary variables and secondary variables were given with existing data from references. Specifications of the constitutive relations were made for the kinetic variables and their conjugate forces.


Sign in / Sign up

Export Citation Format

Share Document