Design, Performance, and Economics of 50-kW and 500-kW Vertical Axis Wind Turbines

1983 ◽  
Vol 105 (4) ◽  
pp. 418-424 ◽  
Author(s):  
L. A. Schienbein ◽  
D. J. Malcolm
Keyword(s):  
Wind Turbine ◽  
Control Systems ◽  
Operating Cost ◽  
Vertical Axis ◽  
Cost Performance ◽  
Vertical Axis Wind Turbines ◽  
Charge Rate ◽  
And Performance ◽  
High Level ◽  
And Control

A review of the development and performance of the DAF Indal 50-kW vertical axis Darrieus wind turbine shows that a high level of technical development and reliability has been achieved. Features of the drive train, braking and control systems are discussed and performance details are presented. Details are also presented of a 500-kW VAWT that is currently in production. A discussion of the economics of both the 50-kW and 500-kW VAWTs is included, showing the effects of charge rate, installed cost, operating cost, performance, and efficiency.

scholarly journals A method to analyze power output of vertical-axis wind turbines under rain

2018 ◽  
Vol 56 (6) ◽  
pp. 761
Author(s):  
Duc Huu Nguyen
Keyword(s):  
Wind Turbine ◽  
Power Output ◽  
Vertical Axis ◽  
Power Production ◽  
Vertical Axis Wind Turbine ◽  
Physical Processes ◽  
Vertical Axis Wind Turbines ◽  
Rain Drops ◽  
Weather Changes ◽  
And Performance

A method to analyze effect power output of a vertical axis wind turbine under rain is proposed. The rain had the effect of increasing the drag, slowing the rotational speed of the wind turbine and decreasing the power and performance. More and more ambitious projects for wind turbine production being set on many where on Vietnam, it is necessary to understand all the factors, especially by weather changes, that might affect wind power production. In this research, we lay out a model to estimate the effect of rainfall by simulating the actual physical processes of the rain drops forming on the surface of the blades of a vertical-axis wind turbine (VAWT), thereby determining optimal wetness, then power and performance respectively. This could have an effect on the control strategy necessary for designing and controlling wind turbine.

scholarly journals Fabrication and Performance Evaluation of Savonious Vertical Axis Wind Turbine for Uncertain Speed Regions

2017 ◽  
Vol 13 (2) ◽  
Keyword(s):  
Performance Evaluation ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Vertical Axis ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
And Performance

The consumption of electricity in urban as well as rural is increasing every day and became an essential commodity for household and industrial purposes. Unfortunately the availability of electrical energy in India is not sufficient to the required demand and it is essential to discover and generate energy from non-conventional sources with cheap cost. On the same time it is necessary to reduce the consumption of conventional sources and to save fuel. Among all the renewable resources, wind is one of the best resources available all the time at free of cost. Especially vertical axis wind turbines (VAWT) are self-starting, omni directional. They require no yaw mechanism to continuously orient towards the wind direction and provide a more reliable energy conversion technology, as compared to horizontal axis wind turbine. Particularly savonius vertical axis wind turbines (SVAWT) are suitable and practically possible at low or uncertain wind speed regimes. They can be fitted on rooftops and also suitable for the urban areas where electricity is not available properly. This project deals with the fabrication and performance evaluation of savonius vertical axis wind turbine using two blade rotor. The amount of power developed by the wind turbine is calculated under theoretical and practical conditions and aerodynamics coefficients are also estimated. And various design parameters of savonious rotor are identified and determined.

Performance Predictions of a Circulation Controlled-Vertical Axis Wind Turbine With Solidity Control

2009 ◽  
Author(s):  
Jay P. Wilhelm ◽  
Emily D. Pertl ◽  
Franz A. Pertl ◽  
James E. Smith
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Vertical Axis Wind Turbines ◽  
Performance Predictions ◽  
Overall Performance ◽  
And Control ◽  
Selection Of

Conventional straight bladed vertical axis wind turbines are typically designed to produce maximum power at tip speed ratio, but power production can suffer when operating outside of the design range. These turbines, unless designed specifically for low speed operation, may require rotational startup assistance. Circulation control methods, such as using blowing slots on the trailing edge could be applied to a Vertical Axis Wind Turbine (VAWT) blade. Improvements to the amount of power developed at lower speeds and elimination or reduction of startup assistance could be possible with this lift augmentation. Selection of a beneficial rotor solidity and control over when to utilize the blowing slots for the CC-VAWT (Circulation Controlled-Vertical Axis Wind Turbine) appears to have a profound impact on overall performance. Preliminary performance predictions indicate that at a greater range of rotor solidities, the CC-VAWT can have overall performance levels that exceed a conventional VAWT. This paper describes the performance predictions and solidity selection of a circulation controlled vertical axis wind turbine that can operate at higher overall capture efficiencies than a conventional VAWT.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

scholarly journals Aerodynamic improvement of Darrieus wind turbine

2021 ◽  
Vol 897 (1) ◽  
pp. 012001
Author(s):  
Oleg Goman ◽  
Andrii Dreus ◽  
Anton Rozhkevych ◽  
Krystyna Heti
Keyword(s):  
Reynolds Number ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Reliability ◽  
Vertical Axis ◽  
Vertical Wind ◽  
Integral Approach ◽  
Vertical Axis Wind Turbine ◽  
Calculation Algorithm ◽  
Vertical Axis Wind Turbines

Abstract Until recently, vertical-axis wind turbines are less extensively developed in wind energetics. At the same time, there are a number of advantages in turbines of such type like their independence from the change of wind direction, lower levels of aerodynamic and infrasound noises, higher structural reliability (compared to horizontal engines), etc. With these advantages, vertical-axis wind turbines demonstrate promising capacities. Inter alia, the productiveness of such turbines can be refined through the aerodynamic improvement of the structure and comprehensive optimization of the rotor geometry. The main purpose of the presented paper is to aerodynamically improve vertical wind turbine in order to increase the efficiency of wind energy conversion into electricity. Within the framework of the classical theory of impulses, this article presents a study of the effect of variation in Reynolds number on the general energy characteristics of a vertical-axis wind turbine with two blades. The integral approach makes it possible to use a single-disk impulse model to determine the main specific indicators of the system. The power factor was calculated based on the obtained value of the shaft torque factor, which in turn was determined by numerically integrating the total torque generated by the wind turbine. To calculate the test problem, we used the classic NACA airfoils: 0012, 0015, 0018 and 0021. The proposed calculation algorithm makes it possible not to indicate the Reynolds number and corresponding aerodynamic coefficients at the beginning of the calculation, but to recalculate it depending on the relative speed, position of the airfoil and the linear speed of the airfoil around the circumference. Proposed modern design techniques can be helpful for optimization of vertical wind turbines.

Investigation of vertical axis wind turbine airfoil performance in rain

2017 ◽  
Vol 232 (2) ◽  
pp. 181-194 ◽  
Author(s):  
Zhenlong Wu ◽  
Yihua Cao
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Meteorological Condition ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Turbine Performance ◽  
Practical Design ◽  
Wind Turbine Airfoil ◽  
Naca 0015

Rainfall is a common meteorological condition that wind turbines may encounter and by which their performance may be affected. This paper comprehensively investigates the effects of rainfall on a NACA 0015 airfoil which is commonly used in vertical axis wind turbines. A CFD-based Eulerian–Lagrangian multiphase approach is proposed to study the static, rotating, and oscillating performances of the NACA 0015 airfoil in rainy conditions. It is found that for the different airfoil movements, the airfoil performance can seriously be deteriorated in the rain condition. Rain also causes premature boundary layer separations and more severe flow recirculations than in the dry condition. These findings seem to be the first open reports on rain effects on wind turbine performance and should be of some significance to practical design.

On Co-Scheduling of Update and Control Transactions in Real-Time Sensing and Control Systems: Algorithms, Analysis, and Performance

2013 ◽  
Vol 25 (10) ◽  
pp. 2325-2342 ◽  
Author(s):  
Song Han ◽  
Kam-Yiu Lam ◽  
Jiantao Wang ◽  
Krithi Ramamritham ◽  
Aloysius K. Mok
Keyword(s):  
Control Systems ◽  
Real Time ◽  
And Performance ◽  
And Control

scholarly journals On mooring line tension and fatigue prediction for offshore vertical axis wind turbines: A comparison of lumped mass and quasi-static approaches

2018 ◽  
Vol 42 (2) ◽  
pp. 97-107 ◽  
Author(s):  
D Cevasco ◽  
M Collu ◽  
CM Rizzo ◽  
M Hall
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Line Tension ◽  
Vertical Axis ◽  
Offshore Wind ◽  
Mooring Line ◽  
Offshore Wind Turbine ◽  
Vertical Axis Wind Turbine ◽  
Lumped Mass ◽  
Vertical Axis Wind Turbines

Despite several potential advantages, relatively few studies and design support tools have been developed for floating vertical axis wind turbines. Due to the substantial aerodynamics differences, the analyses of vertical axis wind turbine on floating structures cannot be easily extended from what have been already done for horizontal axis wind turbines. Therefore, the main aim of the present work is to compare the dynamic response of the floating offshore wind turbine system adopting two different mooring dynamics approaches. Two versions of the in-house aero-hydro-mooring coupled model of dynamics for floating vertical axis wind turbine (FloVAWT) have been used, employing a mooring quasi-static model, which solves the equations using an energetic approach, and a modified version of floating vertical axis wind turbine, which instead couples with the lumped mass mooring line model MoorDyn. The results, in terms of mooring line tension, fatigue and response in frequency have been obtained and analysed, based on a 5 MW Darrieus type rotor supported by the OC4-DeepCwind semisubmersible.

Sign in / Sign up

Export Citation Format

Share Document