Effect of Internal Pressure on Flexibility Factors in Pipe Elbows With End Constraints

1985 ◽  
Vol 107 (1) ◽  
pp. 60-63 ◽  
Author(s):  
R. Natarajan ◽  
S. Mirza
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Stress Distribution ◽  
Internal Pressure ◽  
Numerical Results ◽  
Flexibility Factor ◽  
Bend Angles ◽  
Element Method

Finite element method has been used in the present work to study the stress distribution in an elbow with end constraints subjected to in-plane moment and pressure. Elbows of short radius (R/r) with varying pipe factors and bend angles have been considered. Present numerical results show for all elbow angles that follower pipe factors (thin pipes) the internal pressure reduces the flexibility factor by a larger amount than for elbows having larger pipe factors. These results are in line with the conclusions published earlier.

scholarly journals An Extended Finite Element Method (XFEM) Study on the Elastic T-Stress Evaluations for a Notch in a Pipe Steel Exposed to Internal Pressure

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 507
Author(s):  
K. Yakoubi ◽  
S. Montassir ◽  
Hassane Moustabchir ◽  
A. Elkhalfi ◽  
Catalin Iulian Pruncu ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Extended Finite Element Method ◽  
Research Study ◽  
Extended Finite Element ◽  
T Stress ◽  
Cracked Structures ◽  
Element Method

The work investigates the importance of the K-T approach in the modelling of pressure cracked structures. T-stress is the constant in the second term of the Williams expression; it is often negligible, but recent literature has shown that there are cases where T-stress plays the role of opening the crack, also T-stress improves elastic modeling at the point of crack. In this research study, the most important effects of the T-stress are collected and analyzed. A numerical analysis was carried out by the extended finite element method (X-FEM) to analyze T-stress in an arc with external notch under internal pressure. The different stress method (SDM) is employed to calculate T-stress. Moreover, the influence of the geometry of the notch on the biaxiality is also examined. The biaxiality gave us a view on the initiation of the crack. The results are extended with a comparison to previous literature to validate the promising investigations.

The Accepting of Pipe Bends With Ovality and Thinning Using Finite Element Method

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
AR. Veerappan ◽  
S. Shanmugam ◽  
S. Soundrapandian
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Cross Sections ◽  
Pressure Ratio ◽  
Empirical Relationship ◽  
The Finite Element Method ◽  
Element Method

Thinning and ovality are commonly observed irregularities in pipe bends, which induce higher stress than perfectly circular cross sections. In this work, the stresses introduced in pipe bends with different ovalities and thinning for a particular internal pressure are calculated using the finite element method. The constant allowable pressure ratio for different ovalities and thinning is presented at different bend radii. The allowable pressure ratio increases, attains a maximum, and then decreases as the values of ovality and thinning are increased. An empirical relationship to determine the allowable pressure in terms of bend ratio, pipe ratio, percent thinning, and percent ovality is presented. The pipe ratio has a strong effect on the allowable pressure.

A Numerical Analysis for Cracks Emanating from a Quarter-Spherical Cavity on the Edge of an Elastic Body

2012 ◽  
Vol 499 ◽  
pp. 243-247
Author(s):  
Long Hai Yan ◽  
Bao Liang Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Analysis ◽  
Elastic Body ◽  
Spherical Cavity ◽  
Numerical Results ◽  
Shielding Effect ◽  
Corner Crack ◽  
Element Method

This note is specifically concerned with cracks emanating from a quarter-spherical cavity on the edge in an elastic body (see Fig.1) by using finite element method. The numerical results show that the existence of the cavity has a shielding effect of the corner crack. In addition, it is found that the effect of boundaries parallel to the crack on the SIFs is obvious when.H/R≤3

scholarly journals Assessment of Rectangular Cavity in Concrete Gravity Retaining Wall using Finite Element Method

2019 ◽  
Vol 8 (4) ◽  
pp. 2656-2661
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Stress Distribution ◽  
Cross Section ◽  
Retaining Wall ◽  
Rectangular Cavity ◽  
Gravity Retaining Wall ◽  
The Cross ◽  
Conditions Of Stability ◽  
Element Method

The design of the Gravity retaining wall (GRW) is a trial and error process. Prevailing conditions of backfill are used to determine the profile of GRW, which proceeds with the selection of provisional dimensions. The optimum section is having factors of safety of stability higher than the allowable values and stresses in the cross-section smaller than permissible. The cross-section is designed to fulfill conditions of stability, subjected to very low stresses. The strength of the material, which is provided in the cross-section remains unutilized. A computer program is developed to find stresses at various locations on the cross-section of GRW using the Finite Element Method (FEM). A discontinuity in the form of a rectangular cavity is introduced in the cross-section of GRW to optimize it. The rectangular cavity is introduced in the cross-section of GRW at different locations. An attempt is made in this paper to find the stress distribution in the gravity retaining wall cross-section and to study the effect of the rectangular cavity on the stress distribution. Two cases representing different locations are considered to study the effect of the cavity. The location of the cavity is distinguished by the parameter w, the effects of cases with varied was 0.2305 (Case-I) and 0.1385 (Case-II) are observed. The cavity, which is provided not only makes the wall structurally efficient but also economically feasible.

The Semi-Discrete Finite Element Method for the Cauchy Equation

2014 ◽  
Vol 668-669 ◽  
pp. 1130-1133
Author(s):  
Lei Hou ◽  
Xian Yan Sun ◽  
Lin Qiu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Results ◽  
Cauchy Equation ◽  
The Time Domain ◽  
Nicolson Scheme ◽  
Discrete Finite Element ◽  
Better Than ◽  
Element Method ◽  
Crank Nicolson

In this paper, we employ semi-discrete finite element method to study the convergence of the Cauchy equation. The convergent order can reach. In numerical results, the space domain is discrete by Lagrange interpolation function with 9-point biquadrate element. The time domain is discrete by two difference schemes: Euler and Crank-Nicolson scheme. Numerical results show that the convergence of Crank-Nicolson scheme is better than that of Euler scheme.

Numerical Study of Hydrodynamic Forces on a Submarine Piggyback Pipeline Under Wave Action

2012 ◽  
Author(s):  
Xiaofei Cheng ◽  
Yongxue Wang ◽  
Bing Ren ◽  
Guoyu Wang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Model ◽  
Stokes Equations ◽  
Numerical Study ◽  
Hydrodynamic Forces ◽  
Wave Action ◽  
Numerical Results ◽  
Physical Model Test ◽  
Element Method

In the paper, a 2D numerical model is established to simulate the hydrodynamic forces on a submarine piggyback pipeline under regular wave action. The two-dimensional Reynolds-averaged Navier-Stokes equations with a κ-ω turbulence model closure are solved by using a three-step Taylor-Galerkin finite element method (FEM). A Computational Lagrangian-Eulerian Advection Remap Volume of Fluid (CLEAR-VOF) method is employed to simulate free surface problems, which is inherently compatible with unstructured meshes and finite element method. The numerical results of in-line force and lift (transverse) force on the piggyback pipeline for e/D = G/D = 0.25 and KC = 25.1 are compared with physical model test results, which are conducted in a marine environmental flume in the State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, China. It is indicated that the numerical results coincide with the experimental results and that the numerical model can be used to predict the hydrodynamic forces on the piggyback pipeline under wave action. Based on the numerical model, the surface pressure distribution and the motion of vortices around the piggyback pipeline for e/D = G/D = 0.25, KC = 25.1 are investigated, and a characteristic vortex pattern around the piggyback pipeline denoted “anti-phase-synchronized” pattern is recognized.

Performance of gravity caisson on sand compaction piles

2008 ◽  
Vol 45 (3) ◽  
pp. 393-407
Author(s):  
Chun Fai Leung ◽  
Rui Fu Shen
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Field Study ◽  
Tilt Angle ◽  
Back Analysis ◽  
Numerical Results ◽  
Container Port ◽  
The Finite Element Method ◽  
Quay Cranes ◽  
Element Method

Gravity caissons were employed as part of the wharf front structures for a container port terminal in Singapore. This paper reports the movements of eight consecutive gravity caissons supported on sand compaction piles (SCPs) with highly variable lengths of penetration. It is established that the caisson movements increase with an increase in the length of the SCP, as longer SCPs are necessary when hard strata are at greater depth. The large caisson movements observed during caisson infilling and backfilling do not pose a concern because the wharf deck beams connecting adjacent caissons can be adjusted. However, the caisson movements under service loads would affect the operation of the overlying quay cranes on top of the caissons. The present field study reveals that preloading the caissons is effective in reducing the caisson movements under service loads because the observed caisson movements are insignificant during subsequent unloading–reloading of the caissons. Back-analysis using the finite element method (FEM) shows that the observed caisson movements at different construction stages can be reasonably replicated. The numerical results are also used to evaluate the caisson tilt angle, which could not be measured in the present field study. The caisson tilt is found to be independent of the length of SCPs underneath a caisson.

Sign in / Sign up

Export Citation Format

Share Document