Stochastic Simulation of PWR Vessel Integrity for Pressurized Thermal Shock Conditions

1984 ◽  
Vol 106 (3) ◽  
pp. 223-229 ◽  
Author(s):  
P. S. Jackson ◽  
D. S. Moelling
Keyword(s):  
Thermal Shock ◽  
Stochastic Simulation ◽  
Bayesian Method ◽  
Reactor Vessel ◽  
Pressurized Water Reactor ◽  
Sampling Errors ◽  
Pressurized Water ◽  
Simulation Methodology ◽  
Pressurized Thermal Shock ◽  
Vessel Integrity

A stochastic simulation methodology is presented for performing probabilistic analyses of Pressurized Water Reactor vessel integrity. Application of the methodology to vessel-specific integrity analyses is described in the context of Pressurized Thermal Shock (PTS) conditions. A Bayesian method is described for developing vessel-specific models of the density of undetected volumetric flaws from ultrasonic inservice inspection results. Uncertainty limits on the probabilistic results due to sampling errors are determined from the results of the stochastic simulation. An example is provided to illustrate the methodology.

Fast Neutron Reduction Techniques for Plant Lifetime Extension

2010 ◽  
Author(s):  
Choon Sung Yoo ◽  
Byoung Chul Kim ◽  
Tae Je Kwon
Keyword(s):  
Fast Neutron ◽  
Thermal Shock ◽  
Neutron Irradiation ◽  
Neutron Transport ◽  
Reactor Vessel ◽  
Pressurized Water ◽  
Reduction Techniques ◽  
Pressurized Thermal Shock ◽  
Water Reactors ◽  
Inner Vessel

A Pressurized Thermal Shock (PTS) Event is an event or transient in pressurized water reactors (PWRs) causing severe overcooling (thermal shock) concurrent with or followed by significant pressure in the reactor vessel. A PTS concern arises if one of these transients acts in beltline region of a reactor vessel where a reduced fracture resistance exists due to neutron irradiation. Such an event may produce a flaw or cause the propagation of a flaw postulated to exist near the inner vessel wall surface, thereby potentially affecting the integrity of the vessel. In this paper fast neutron flux reduction techniques were implemented to reduce the potential risk of PTS due to the neutron irradiation on the pressure vessel beltline region. And the RTPTS value for the end of life of the plant was projected using the fast neutron fluence obtained by neutron transport calculations according to the various core loading pattern and reduction program possible for the future cycles.

Uncertainties in Pressurized Thermal Shock Analyses

2019 ◽  
Author(s):  
M. Niffenegger ◽  
O. Costa Garrido ◽  
D. F. Mora ◽  
G. Qian ◽  
R. Mukin ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Thermal Shock ◽  
Probabilistic Approach ◽  
Pressure Vessels ◽  
Pressurized Water Reactor ◽  
Ansys Fluent ◽  
Pressurized Water ◽  
Integrity Assessment ◽  
Safety Margins ◽  
Pressurized Thermal Shock

Abstract Integrity assessment of reactor pressure vessels (RPVs) can be performed either by deterministic fracture mechanics (DFM) or/and by probabilistic fracture mechanics (PFM) analyses. In European countries and Switzerland, only DFM analyses are required. However, in order to establish the probabilistic approach in Switzerland, the advantages and shortcomings of the PFM are investigated in the frame of a national research project. Both, the results from DFM and PFM depend strongly on the previous calculated thermal-hydraulic boundary conditions. Therefore, complete integrity analyses involving several integrated numerical codes and methods were performed for a reference pressurized water reactor (PWR) RPV subjected to pressurized thermal shock (PTS) loads. System analyses were performed with the numerical codes RELAP5 and TRACE, whereas for structural and fracture mechanics calculations, the FAVOR and ABAQUS codes were applied. Additional computational fluid dynamics analyses were carried out with ANSYS/FLUENT, and the plume cooling effect was alternatively considered with GRS-MIX. The results from the different analyses tools are compared, to judge the expected overall uncertainty and reliability of PTS safety assessments. It is shown that the scatter band of the stress intensities for a fixed crack configuration is rather significant, meaning that corresponding safety margins should be foreseen. The conditional probabilities of crack initiation and RPV failure might also differ, depending on the considered random parameters and applied rules.

Structural Reliability Evaluation on the Pressurized Water Reactor Pressure Vessel Under Pressurized Thermal Shock Events

2014 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Thermal Shock ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

The failure probability of the pressurized water reactor pressure vessel for a domestic nuclear power plant in Taiwan has been evaluated according to the technical basis of the USNRC’s new pressurized thermal shock (PTS) screening criteria. The ORNL’s FAVOR code and the PNNL’s flaw models are employed to perform the probabilistic fracture mechanics analysis based on the plant specific parameters of the domestic reactor pressure vessel. Meanwhile, the PTS thermal hydraulic and the probabilistic risk assessment data analyzed from a similar nuclear power plant in the United States for establishing the new PTS rule are applied as the loading condition. Besides, an RT-based regression formula derived by the USNRC is also utilized to verify the through-wall cracking frequencies. It is found that the through-wall cracking of the analyzed reactor pressure vessel only occurs during the PTS events resulted from the stuck-open primary safety relief valves that later reclose, but with only an insignificant failure risk. The results indicate that the Taiwan domestic PWR reactor pressure vessel has sufficient structural margin for the PTS attack until either the end-of-license or for the proposed extended operation.

Emergency Response Guidance for Reactor Vessel Pressurized Thermal Shock Events

1986 ◽  
Vol 108 (3) ◽  
pp. 346-351
Author(s):  
W. T. Kaiser ◽  
B. S. Monty
Keyword(s):  
Thermal Shock ◽  
Temperature Limit ◽  
Reactor Vessel ◽  
Pressurized Water ◽  
Plant Safety ◽  
Pressurized Thermal Shock ◽  
Water Reactors ◽  
Accident Conditions ◽  
Core Cooling ◽  
Emergency Operating

The operational concern of pressurized thermal shock (PTS) can be minimized by proper operator guidance. This paper presents a method for calculating a pressure temperature limit curve for reactor vessel integrity which can be used to identify an ongoing potential PTS event. This method has been developed for use and is applicable to all pressurized water reactors. The curve is used in emergency operating procedures developed to prioritize various plant safety concerns including PTS and core cooling to ensure proper operator action during accident conditions. This paper emphasizes the development of the pressure-temperature limit and how it is used within the emergency operating procedures.

Methodology and Warm Prestressing Effect for Pressurized Thermal Shock Analysis in Nuclear Power Plant

2015 ◽  
Vol 750 ◽  
pp. 104-113
Author(s):  
Gui An Qian ◽  
Markus Niffenegger
Keyword(s):  
Thermal Shock ◽  
Nuclear Power ◽  
Structural Integrity ◽  
Pressurized Water Reactor ◽  
Local Approach ◽  
Pressurized Water ◽  
Warm Prestressing ◽  
Load Paths ◽  
Pressurized Thermal Shock ◽  
Integrity Analysis

One potential challenge to the integrity of the reactor pressure vessel (RPV) in a pressurized water reactor is posed by pressurized thermal shock (PTS). Therefore, the safety of the RPV with regard to neutron embrittlement has to be analyzed. In this paper, the procedure and method for the structural integrity analysis of RPV subjected to PTS is presented. The FAVOR code is applied to calculate the probabilities for crack initiation and failure by considering crack distributions based on cracks observed in the Shoreham and PVRUF RPVs in the U.S. A local approach to fracture, i.e. the σ*-A* model is used to predict the warm prestressing (WPS) effect on the RPV integrity. The results show that the remaining stress contributes to the WPS effect, whereas the increase of fracture toughness is not completely attributed to the remaining stress. The modeled load paths predict a material toughness increase of 30-100%.

The Impact of an Improved Flaw Model on a Pressurized Thermal Shock Evaluation

2002 ◽  
Author(s):  
T. L. Dickson ◽  
F. A. Simonen
Keyword(s):  
Thermal Shock ◽  
Computational Models ◽  
The United States ◽  
Pressure Vessels ◽  
Pressurized Water ◽  
Evaluation Program ◽  
Pressurized Thermal Shock ◽  
Computational Methodology ◽  
The Impact ◽  
Flaw Characterization

The current regulations for pressurized thermal shock (PTS) were derived from computational models that were developed in the early-mid 1980s. The computational models utilized in the 1980s conservatively postulated that all fabrication flaws in reactor pressure vessels (RPVs) were inner-surface breaking flaws. It was recognized at that time that flaw-related data had the greatest level of uncertainty of the inputs required for the probabilistic-based PTS evaluations. To reduce this uncertainty, the United States Nuclear Regulatory Commission (USNRC) has in the past few years supported research at Pacific Northwest National Laboratory (PNNL) to perform extensive nondestructive and destructive examination of actual RPV materials. Such measurements have been used to characterize the number, size, and location of flaws in various types of welds and the base metal used to fabricate RPVs. The USNRC initiated a comprehensive project in 1999 to re-evaluate the current PTS regulations. The objective of the PTS Re-evaluation program has been to incorporate advancements and refinements in relevant technologies (associated with the physics of PTS events) that have been developed since the current regulations were derived. There have been significant improvements in the computational models for thermal hydraulics, probabilistic risk assessment (PRA), human reliability analysis (HRA), materials embrittlement effects on fracture toughness, and fracture mechanics methodology. However, the single largest advancement has been the development of a technical basis for the characterization of fabrication-induced flaws. The USNRC PTS-Revaluation program is ongoing and is expected to be completed in 2002. As part of the PTS Re-evaluation program, the updated risk-informed computational methodology as implemented into the FAVOR (Fracture Analysis of Vessels: Oak Ridge) computer code, including the improved PNNL flaw characterization, was recently applied to a domestic commercial pressurized water reactor (PWR). The objective of this paper is to apply the same updated computational methodology to the same PWR, except utilizing the 1980s flaw model, to isolate the impact of the improved PNNL flaw characterization on the PTS analysis results. For this particular PWR, the improved PNNL flaw characterization significantly reduced the frequency of RPV failure, i.e., by between one and two orders of magnitude.

Sign in / Sign up

Export Citation Format

Share Document