The Vortex-Filament Nature of Reverse Flow on the Verge of Rotating Stall

1989 ◽  
Vol 111 (4) ◽  
pp. 450-461 ◽  
Author(s):  
Y. N. Chen ◽  
U. Haupt ◽  
M. Rautenberg
Keyword(s):  
Reverse Flow ◽  
Research Work ◽  
Tangential Velocity ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Ring Vortex ◽  
Extensive Literature ◽  
Transition Range ◽  
Vortex Filaments ◽  
Spiral Vortex

On the verge of rotating stall, very orderly reverse flow forms from the outlet of the rotor/impeller along the casing/shroud toward the inlet in axial/centrifugal compressors (Koch, 1970; Haupt, et al., 1987). The experiment on a centrifugal compressor reveals furthermore that the reverse flow is composed of stable spiral vortex filaments. Their vorticity can be transferred to the inlet tip vortex, known as prerotation. The behavior of these vortex filaments is examined based on the fundamental research work on rotating bodies available in the literature. This result shows that the vortex filaments are composed of Taylor’s vortex pairs, but with unequal vortex strengths within the pair. They form the transition range from a laminar to a turbulent three-dimensional boundary layer with a very steep tangential velocity profile. This profile is associated with the appearance of a toroidal ring vortex in the rotor/impeller, acting as a recirculatig secondary flow. It can be further shown from the analysis of the extensive literature that the orderly path of the reverse flow is enabled by the cessation of the leakage flow of the rotor tip clearance. The reason for this is that the growing tangential flow field extends beyond the rotor tip up to the close proximity of the endwall, so that the tip clearance is blocked.

Passive Control of Rotating Stall in a Parallel-Wall Vaneless Diffuser by Radial Grooves

1999 ◽  
Vol 122 (1) ◽  
pp. 90-96 ◽  
Author(s):  
Junichi Kurokawa ◽  
Sankar L. Saha ◽  
Jun Matsui ◽  
Takaya Kitahora
Keyword(s):  
Passive Control ◽  
Reverse Flow ◽  
Tangential Velocity ◽  
Rotating Stall ◽  
Vaneless Diffuser ◽  
Flow Angle ◽  
Remarkable Effect ◽  
Entire Flow ◽  
Parallel Wall ◽  
Theoretical Considerations

In order to control and suppress rotating stall in the diffuser of a centrifugal turbomachine, a passive method of utilizing radial shallow grooves is proposed and its effect is studied theoretically and experimentally. The results show that radial grooves of 3 mm depth on one wall or of only 1 mm depth on both walls can suppress rotating stall in a vaneless diffuser for the entire flow range. Theoretical considerations have revealed that this remarkable effect of radial grooves is caused by two mechanisms; one is a significant decrease in tangential velocity at the diffuser inlet due to mixing between the main flow and the groove flow, and the other is a remarkable increase in radial velocity due to the groove reverse flow. Both effects have the same contribution to increase the flow angle. [S0098-2202(00)02901-1]

Pressure and Velocity Fluctuations in the Diffuser for Rotating Stall Period

2012 ◽  
Author(s):  
Youhwan Shin ◽  
Ji-In Yoon ◽  
Yoon Pyo Lee
Keyword(s):  
Measurement Technique ◽  
Reverse Flow ◽  
Tangential Velocity ◽  
Ccd Camera ◽  
Rotating Stall ◽  
Vaneless Diffuser ◽  
Velocity Fluctuations ◽  
Pressure Transducers ◽  
Piv Measurement ◽  
Velocity Images

This study describes details on local reverse flow patterns in a vaneless diffuser by experiments through PIV measurement technique in the water bath during the unstable operation of a compressor with radial impeller. In order to do these measurements, the pressure transducers were installed on the hub wall with several diffuser radius ratios and they were synchronized with the velocity images of CCD camera. Especially we tried to make them synchronize with time during rotating stall period. For relatively high and low pressure instants, we observed and discussed how the radial and tangential velocity components fluctuated.

scholarly journals Effects of Tip Leakage Flow on the Aerodynamic Performance and Stability of an Axial-Flow Transonic Compressor Stage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4168
Author(s):  
Botao Zhang ◽  
Xiaochen Mao ◽  
Xiaoxiong Wu ◽  
Bo Liu
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Transonic Compressor

To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow intensity is increased, the shock wave position is moved backward, and the interaction between the tip leakage vortex and shock wave is intensified, while that between the boundary layer and shock wave is weakened. Most of all, the stall mechanisms of the compressors with varying rotor tip clearances are different. The clearance leakage flow is the main cause of the rotating stall under large rotor tip clearance. However, the stall form for the compressor with half of the designed tip clearance is caused by the joint action of the rotor tip stall caused by the leakage flow spillage at the blade leading edge and the whole blade span stall caused by the separation of the boundary layer of the rotor and the stator passage. Within the investigated varied range, when the rotor tip clearance size is half of the design, the compressor performance is improved best, and the peak efficiency and stall margin are increased by 0.2% and 3.5%, respectively.

Detached Eddy Simulation of Transonic Rotor Stall Flutter Using a Fully Coupled Fluid-Structure Interaction

2011 ◽  
Author(s):  
Hongsik Im ◽  
Xiangying Chen ◽  
Gecheng Zha
Keyword(s):  
Stokes Equations ◽  
Rotating Stall ◽  
Rotor Blades ◽  
Tip Clearance ◽  
Weno Scheme ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Stall Flutter ◽  
Fully Coupled

Detached eddy simulation of an aeroelastic self-excited instability, flutter in NASA Rotor 67 is conducted using a fully coupled fluid/structre interaction. Time accurate compressible 3D Navier-Stokes equations are solved with a system of 5 decoupled modal equations in a fully coupled manner. The 5th order WENO scheme for the inviscid flux and the 4th order central differencing for the viscous flux are used to accurately capture interactions between the flow and vibrating blades with the DES (detached eddy simulation) of turbulence. A moving mesh concept that can improve mesh quality over the rotor tip clearance was implemented. Flutter simulations were first conducted from choke to stall using 4 blade passages. Stall flutter initiated at rotating stall onset, grows dramatically with resonance. The frequency analysis shows that resonance occurs at the first mode of the rotor blade. Before stall, the predicted responses of rotor blades decayed with time, resulting in no flutter. Full annulus simulation at peak point verifies that one can use the multi-passage approach with periodic boundary for the flutter prediction.

Vortex formation on surging aerofoils with application to reverse flow modelling

2018 ◽  
Vol 859 ◽  
pp. 59-88 ◽  
Author(s):  
Philip B. Kirk ◽  
Anya R. Jones
Keyword(s):  
Surface Pressure ◽  
Reverse Flow ◽  
Vortex Formation ◽  
Three Dimensional ◽  
Tangential Velocity ◽  
Leading Edge ◽  
Field Measurements ◽  
Reduced Frequency ◽  
Advance Ratio ◽  
Convection Speed

The leading-edge vortex (LEV) is a powerful unsteady flow structure that can result in significant unsteady loads on lifting blades and wings. Using force, surface pressure and flow field measurements, this work represents an experimental campaign to characterize LEV behaviour in sinusoidally surging flows with widely varying amplitudes and frequencies. Additional tests were conducted in reverse flow surge, with kinematics similar to the tangential velocity profile seen by a blade element in recent high-advance-ratio rotor experiments. General results demonstrate the variability of LEV convection properties with reduced frequency, which greatly affected the average lift-to-drag ratio in a cycle. Analysis of surface pressure measurements suggests that LEV convection speed is a function only of the local instantaneous flow velocity. In the rotor-comparison tests, LEVs formed in reverse flow surge were found to convect more quickly than the corresponding reverse flow LEVs that form on a high-advance-ratio rotor, demonstrating that rotary motion has a stabilizing effect on LEVs. The reverse flow surging LEVs were also found to be of comparable strength to those observed on the high-advance-ratio rotor, leading to the conclusion that a surging-wing simplification might provide a suitable basis for low-order models of much more complex three-dimensional flows.

scholarly journals A Support of Independent Processes Outside of Information System, Using an Ontology Driven Application

2014 ◽  
Vol 2 (12) ◽  
pp. 45-52
Author(s):  
Ladislav Burita
Keyword(s):  
Information Technology ◽  
Information System ◽  
Research Work ◽  
Extensive Literature ◽  
Final Solution ◽  
Web Based ◽  
Real Possibility ◽  
Current State ◽  
Ontology Design ◽  
Experimental Laboratory

The purpose of the article is to analyze support of the independent processes, using any tool of information technology (IT) outside of the information system (IS) in the enterprise environment. The useful tool of IT could be the software (SW) ATOM, an ontology-driven web based application. Changes in IS are very expensive, complicated and risky, but it should be suggested solution omitted. The extensive literature review of the current state of the topic is added. The chosen process is innovation; the life cycle of innovation is explained: suggestion of innovation, demand for the solution of innovation, the final solution of innovation, and project for implementation of innovation. The methodology of an ontology preparation for the SW application includes design scheme of classes and associations between classes, preparation table of assignment characteristics to classes, and implementation of an ontology design in SW ATOM. The real possibility to support independent processes outside of IS using an ontology-driven application was experimentally verified and confirmed, and the result of research work could be used for any process outside of IS. Limits of the proposed solution consist of only experimental laboratory verification. For the practical use, it should be necessary first to prepare a prototype for the corporation IS in an enterprise environment.

scholarly journals Tip Clearance Actuation With Magnetic Bearings for High-Speed Compressor Stall Control

2000 ◽  
Vol 123 (3) ◽  
pp. 464-472 ◽  
Author(s):  
Z. S. Spakovszky ◽  
J. D. Paduano ◽  
R. Larsonneur ◽  
A. Traxler ◽  
M. M. Bright
Keyword(s):  
High Speed ◽  
Design Procedure ◽  
Magnetic Bearing ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Magnetic Bearings ◽  
Test Facility ◽  
Control Analysis ◽  
Servo Actuator ◽  
Stall Control

Magnetic bearings are widely used as active suspension devices in rotating machinery, mainly for active vibration control purposes. The concept of active tip-clearance control suggests a new application of magnetic bearings as servo-actuators to stabilize rotating stall in axial compressors. This paper presents a first-of-a-kind feasibility study of an active stall control experiment with a magnetic bearing servo-actuator in the NASA Glenn high-speed single-stage compressor test facility. Together with CFD and experimental data a two-dimensional, incompressible compressor stability model was used in a stochastic estimation and control analysis to determine the required magnetic bearing performance for compressor stall control. The resulting requirements introduced new challenges to the magnetic bearing actuator design. A magnetic bearing servo-actuator was designed that fulfilled the performance specifications. Control laws were then developed to stabilize the compressor shaft. In a second control loop, a constant gain controller was implemented to stabilize rotating stall. A detailed closed loop simulation at 100 percent corrected design speed resulted in a 2.3 percent reduction of stalling mass flow, which is comparable to results obtained in the same compressor by Weigl et al. (1998. ASME J. Turbomach. 120, 625–636) using unsteady air injection. The design and simulation results presented here establish the viability of magnetic bearings for stall control in aero-engine high-speed compressors. Furthermore, the paper outlines a general design procedure to develop magnetic bearing servo-actuators for high-speed turbomachinery.

scholarly journals Comparison and Sensibility Analysis of Warning Parameters for Rotating Stall Detection in an Axial Compressor

2020 ◽  
Vol 5 (3) ◽  
pp. 16 ◽  
Author(s):  
Gabriel Margalida ◽  
Pierric Joseph ◽  
Olivier Roussette ◽  
Antoine Dazin
Keyword(s):  
Research Work ◽  
Axial Compressor ◽  
Rotating Stall ◽  
Stall Inception ◽  
Axial Compressors ◽  
Sensibility Analysis ◽  
Stall Warning ◽  
Two Parameters ◽  
Unsteady Pressure Measurements

The present paper aims at evaluating the surveillance parameters used for early stall warning in axial compressors, and is based on unsteady pressure measurements at the casing of a single stage axial compressor. Two parameters—Correlation and Root Mean Square (RMS)—are first compared and their relative performances discussed. The influence of sensor locations (in both radial and axial directions) is then considered, and the role of the compressor’s geometrical irregularities in the behavior of the indicators is clearly highlighted. The influence of the throttling process is also carefully analyzed. This aspect of the experiment’s process appears to have a non-negligible impact on the stall warning parameters, despite being poorly documented in the literature. This last part of this research work allow us to get a different vision of the alert parameters compared to what is classically done in the literature, as the level of irregularity that is reflected by the magnitude of the parameters appears to be an image of a given flow rate value, and not a clear indicator of the stall inception.

Stereo-PIV Measurements of Turbulent Swirling Flow Inside a Pipe

2020 ◽  
Author(s):  
Ayesha Almheiri ◽  
Lyes Khezzar ◽  
Mohamed Alshehhi ◽  
Saqib Salam ◽  
Afshin Goharzadeh
Keyword(s):  
Swirling Flow ◽  
Reverse Flow ◽  
Tangential Velocity ◽  
Circular Disk ◽  
Pipe Diameter ◽  
Working Fluid ◽  
Complex Flow ◽  
Mean Velocity ◽  
Radial Profiles ◽  
The Mean

Abstract Stereo-PIV is used to map turbulent strongly swirling flow inside a pipe connected to a closed recirculating system with a transparent test section of 0.6 m in length and a pipe diameter of 0.041 m. The Perspex pipe was immersed inside a water trough to reduce the effects of refraction. The working fluid was water and the Reynolds number based on the bulk average velocity inside the pipe and pipe diameter was equal to 14,450. The turbulent flow proceeds in the downstream direction and interacts with a circular disk. The measurements include instantaneous velocity vector fields and radial profiles of the mean axial, radial and tangential components of the velocity in the regions between the swirler exit and circular disk and around this later. The results for mean axial velocity show a symmetric behavior with a minimum reverse flow velocity along the centerline. As the flow developed along the pipe’s length, the intensity of the reversed flow was reduced and the intensity of the swirl decays. The mean tangential velocity exhibits a Rankine-vortex distribution and reached its maximum around half of the pipe’s radius. As the flow approaches the disk, the flow reaches stagnation and a complex flow pattern of vortices is formed. The PIV results are contrasted with LDV measurements of mean axial and tangential velocity. Good agreement is shown over the mean velocity profiles.

Tailored Structural Design and Aeromechanical Control of Axial Compressor Stall: Part II — Evaluation of Approaches

2003 ◽  
Author(s):  
L. G. Fre´chette ◽  
O. G. McGee ◽  
M. B. Graf
Keyword(s):  
Structural Parameters ◽  
Axial Compressor ◽  
Coupled System ◽  
Rotating Stall ◽  
Rotor Blades ◽  
Tip Clearance ◽  
Theoretical Evaluation ◽  
Axial Compressors ◽  
Spatial Modes ◽  
Control Authority

A theoretical evaluation was conducted delineating how aeromechanical feedback control can be utilized to stabilize the inception of rotating stall in axial compressors. Ten aeromechanical control methodologies were quantitatively examined based on the analytical formulations presented in the first part of this paper (McGee et al, 2003a). The maximum operating range for each scheme is determined for optimized structural parameters, and the various schemes are compared. The present study shows that the most promising aeromechanical designs and controls for a class of low-speed axial compressors were the use of dynamic fluid injection. Aeromechanically incorporating variable duct geometries and dynamically re-staggered IGV and rotor blades were predicted to yield less controllability. The aeromechanical interaction of a flexible casing wall was predicted to be destabilizing, and thus should be avoided by designing sufficiently rigid structures to prevent casing ovalization or other structurally-induced variations in tip clearance. Control authority, a metric developed in the first part of this paper, provided a useful interpretation of the aeromechanical damping of the coupled system. The model predictions also show that higher spatial modes can become limiting with aeromechanical feedback, both in control of rotating stall as well as in considering the effects of lighter, less rigid structural aeroengine designs on compressor stability.

Sign in / Sign up

Export Citation Format

Share Document