Analysis of Measurements in Vaned Diffusers of Centrifugal Compressors

1988 ◽  
Vol 110 (1) ◽  
pp. 115-121 ◽  
Author(s):  
W. Stein ◽  
M. Rautenberg
Keyword(s):  
Flow Field ◽  
Flow Structure ◽  
Calculation Method ◽  
Geometric Parameters ◽  
Variable Geometry ◽  
Centrifugal Compressors ◽  
Wide Range ◽  
Performance Curves ◽  
Different Types ◽  
Flow Phenomena

In vaned diffusers of centrifugal compressors many different flow phenomena interfere with one another, and different geometric parameters influence the flow field. Variations of these parameters allow the designer to optimize the diffuser for a certain application or to use a variable geometry for controlling the stage over a wide range. Two vaned diffusers that differ only in their passage widths are investigated using different types of measuring technique, in order to analyze the flow structure and to use it as a verification of a calculation method that allows detailed predictions of flow field parameters inside the diffuser, by taking into account geometric variations. Using this method predictions of the flow field of a variable geometry diffuser are made and are compared with the measured performance curves of the stage.

scholarly journals Motion of Passive Scalar by Elasticity-Induced Instability in Curved Microchannel

2014 ◽  
Vol 6 ◽  
pp. 734175 ◽  
Author(s):  
Xiao-Bin Li ◽  
Hong-Na Zhang ◽  
Yang Cao ◽  
Marie Oshima ◽  
Feng-Chen Li
Keyword(s):  
Flow Field ◽  
Flow Structure ◽  
Function Analysis ◽  
Passive Scalar ◽  
Main Direction ◽  
Mixing Enhancement ◽  
Chaotic Flow ◽  
Wide Range ◽  
Elastic Instabilities ◽  
Passive Mixing

This paper presented a direct numerical simulation (DNS) study on the elasticity-induced irregular flow, passive mixing, and scalar evolution in the curvilinear microchannel. The mixing enhancement was achieved at vanishingly low-Reynolds-number chaotic flow raised by elastic instabilities. Along with the mixing process, the passive scalar transportation carried by the flow was greatly affected by the flow structure and the underlying interaction between microstructures of viscoelastic fluid and flow structure itself. The simulations are conducted for a wide range of viscoelasticity. As the elastic effect exceeds the critical value, the flow tends to a chaotic state, while the evolution of scalar gets strong and fast, showing excellent agreement with experimental results. For the temporal changing of scalar gradients, they vary rapidly in the form of isosurfaces, with the shape of “rolls” in the bulk and evolving into “threads” near the wall. That indicates that the flow fields should be related to the deformation of viscoelastic micromolecules. The probability distribution function analysis between micromolecular deformation and flow field deformation shows that the main direction of molecular stretching is perpendicular to the main direction of flow field deformation. It implies they are weakly correlated, due to the confinement of channel wall.

Aerodynamic Analysis of Return Channels of Multi-Stage Centrifugal Compressors

2000 ◽  
Author(s):  
L. J. Lenke ◽  
H. Simon
Keyword(s):  
Flow Structure ◽  
Three Dimensional ◽  
Reynolds Stress Model ◽  
Secondary Flows ◽  
Appreciable Effect ◽  
Viscous Effects ◽  
Centrifugal Compressors ◽  
Streamline Curvature ◽  
Wide Range ◽  
Return Channel

Abstract From the wide range of applications in which centrifugal compressors are used, two different return channels will be investigated, to demonstrate the influence of flow coefficients onto the flow structure. The investigated return channels are typical to join the exit from one stage of a centrifugal machine to the inlet of the next stage and cover the range of very small and large flow coefficients. Starting with a comparison between measurements and numerical results to demonstrate the performance of the calculations, the comparison of both return channels show that three-dimensional phenomena and viscous effects such as secondary flow and wakes have appreciable effect on the fluid dynamics and performance of centrifugal compressors. Especially the deceleration of the flow introduces large separations and recirculations which will decrease the efficiency. Furthermore, a variation of the 180°-bend demonstrates the influence of streamline curvature onto the separation behaviour within the whole return channel. Due to the strongly three-dimensional flow structure with high streamline curvature and secondary flows on hub and shroud of the return channel vanes, a modified explicit algebraic Reynolds stress model will be used for all calculations.

Vortical Flow Structure and Loss Generation Process in a Transonic Centrifugal Compressor Impeller

2007 ◽  
Author(s):  
Seiichi Ibaraki ◽  
Masato Furukawa ◽  
Kenichiro Iwakiri ◽  
Kazuya Takahashi
Keyword(s):  
Flow Field ◽  
Flow Structure ◽  
Centrifugal Compressor ◽  
Secondary Flows ◽  
Vortical Flow ◽  
Generation Process ◽  
Tip Leakage ◽  
Transonic Centrifugal Compressor ◽  
Compressor Impeller ◽  
Flow Phenomena

Transonic centrifugal compressors are used in turbochargers and turboshaft engines because of their small dimensions, relatively high efficiency and wide operating range. The flow field of the transonic centrifugal compressor impeller is highly three dimensional, and is complicated by shock waves, tip leakage vortices, secondary flows and the interactions among them. In order to improve the performance, it is indispensable to understand these complicated flow phenomena in the impeller. Although experimental and numerical research on transonic impeller flow has been reported, thus providing important flow physics, some undetected flow phenomena remain. The authors of the present report carried out detailed Navier-Stokes computations of a transonic impeller flow measured by Laser Doppler Velocimetry (LDV) in previous work. The highly complicated vortical flow structure and the mechanism of loss generation were revealed by a visual data mining technique, namely vortex identification based on the critical point theory and limiting streamline mapping by means of line integral convolution. As a result, it was found that the tip leakage vortices have a significant impact on the flow field and vortex breakdowns that increase the blockage of the flow passage, and that these were caused by shock wave interaction.

Research on Modeling of Compressor Characteristics for Sichuan-East Gas Transmission Pipeline Project

2012 ◽  
Vol 468-471 ◽  
pp. 2393-2398
Author(s):  
Hong Bin Pu ◽  
Yun Ping Zheng ◽  
Yu Chun Wang ◽  
Bai Song Cai ◽  
Qi Liu
Keyword(s):  
Maximum Error ◽  
Regression Coefficients ◽  
Outlet Temperature ◽  
Centrifugal Compressors ◽  
Wide Range ◽  
Performance Curves ◽  
Transmission Pipeline ◽  
Shaft Power ◽  
Pipeline Project ◽  
Rotary Speed

Optimized operation of compressor stations is of great importance for energy saving of Sichuan-East transmission pipeline at high flow rate. However, it is difficult to build an accurate mathematical model to describe the performance curves of centrifugal compressor due to the wide range of rotary speed. The achievements of this thesis are shown as follows. Firstly, the mathematic models for performance curves of the Euramerican centrifugal compressors were established. The optimized regression coefficients were solved rapidly and accurately by Zhan Chong-xi method. Secondly, the compressor ratio, polytropic efficiency, shaft power, outlet pressure, polytropic head and outlet temperature of centrifugal compressors at different flow rates and rotating speeds were calculated accurately. These results provides excellent modeling methods and reliable mathematics models of operating and managing compressor of Sichuan-East gas transmission pipeline. It was found that the lowest correlative index of six optimized models was 0.9772, and the maximum error is 4.2869%.

scholarly journals A Comparison of Experimental With Computational Results in an Annular Turbine Cascade With Emphasis on Losses

1998 ◽  
Author(s):  
C. Casciaro ◽  
M. Treiber ◽  
M. Sell ◽  
A. P. Saxer ◽  
G. Gyarmathy
Keyword(s):  
Flow Field ◽  
Turbulence Models ◽  
Test Case ◽  
Data Sets ◽  
Computational Results ◽  
Efficient Computation ◽  
Free Stream Turbulence ◽  
Wide Range ◽  
Flow Phenomena ◽  
Exit Mach Number

Recent discussions in the industrial CFD community have identified a need for guidelines covering the accurate and efficient computation of a range of flow field classes. This paper addresses some of these issues for a standard turbomachinery test case, by investigating the flow through on annular blade row of a generic turbine profile, operating at an exit Mach number of 0.5. The joint experimental and CFD works have focused upon identifying and quantifying the loss sources and loss development. This has been achieved by the acquisition of dense data sets of a known, high and repeatable experimental accuracy, where, concentrating primarily upon the investigation of the secondary flow phenomena, optimised experimental methods have been employed to measure the pressure distributions in the annuls and the development of the flow field, particularly the loss structures, downstream of the trailing edge. On the CFD side, the flow field has been computed using commercial codes. Adopting the loss distribution as a primary marker for the quality of the CFD results, the performance and efficacy of the codes and the implemented viscous models can be assessed. The flow has been computed both 2D and 3D, from inviscid to laminar to turbulent with different turbulence models, with and without transition. According to the model, the flow has been investigated considering a wide range of parameters influencing its turbulent state. Through this study, guidelines concerning numerical smoothing and free-stream turbulence parameters are proposed for the computation of such flows. The need of a transition model within 3D schemes, rather than an improvement of the turbulence model, to predict accurate loss levels has been recognized. However, through the cross analysis of the different computational results, a good estimate of the loss magnitude and distribution is feasible with the currently used models.

Nanoparticles Functionalized with Venom-Derived Peptides and Toxins for Pharmaceutical Applications

2020 ◽  
Vol 21 (2) ◽  
pp. 97-109 ◽  
Author(s):  
Ana P. dos Santos ◽  
Tamara G. de Araújo ◽  
Gandhi Rádis-Baptista
Keyword(s):  
Oral Absorption ◽  
Current Data ◽  
Pharmacological Activities ◽  
Venom Peptides ◽  
Essential Components ◽  
Wide Range ◽  
Different Types ◽  
Direct Use ◽  
Animal Venoms ◽  
Pharmaceutical Biotechnology

Venom-derived peptides display diverse biological and pharmacological activities, making them useful in drug discovery platforms and for a wide range of applications in medicine and pharmaceutical biotechnology. Due to their target specificities, venom peptides have the potential to be developed into biopharmaceuticals to treat various health conditions such as diabetes mellitus, hypertension, and chronic pain. Despite the high potential for drug development, several limitations preclude the direct use of peptides as therapeutics and hamper the process of converting venom peptides into pharmaceuticals. These limitations include, for instance, chemical instability, poor oral absorption, short halflife, and off-target cytotoxicity. One strategy to overcome these disadvantages relies on the formulation of bioactive peptides with nanocarriers. A range of biocompatible materials are now available that can serve as nanocarriers and can improve the bioavailability of therapeutic and venom-derived peptides for clinical and diagnostic application. Examples of isolated venom peptides and crude animal venoms that have been encapsulated and formulated with different types of nanomaterials with promising results are increasingly reported. Based on the current data, a wealth of information can be collected regarding the utilization of nanocarriers to encapsulate venom peptides and render them bioavailable for pharmaceutical use. Overall, nanomaterials arise as essential components in the preparation of biopharmaceuticals that are based on biological and pharmacological active venom-derived peptides.

Wetting of glass surface using natural surfactants

2020 ◽  
Vol 12 ◽  
Author(s):  
Nihar Ranjan Biswal
Keyword(s):  
Contact Angle ◽  
Glass Surface ◽  
Pure Water ◽  
Amyl Alcohol ◽  
Synthetic Surfactant ◽  
Wide Range ◽  
Different Types ◽  
Natural Surfactants ◽  
Triton X ◽  
Solid Liquid

Background: Surfactant adsorption at the interfaces (solid–liquid, liquid–air, or liquid–liquid) is receiving considerable attention from a long time due to its wide range of practical applications. Objective: Specifically wettability of solid surface by liquids is mainly measured by contact angle and has many practical importances where solid–liquid systems are used. Adsorption of surfactants plays an important role in the wetting process. The wetting behaviours of three plant-based natural surfactants (Reetha, Shikakai, and Acacia) on the glass surface are compared with one widely used nonionic synthetic surfactant (Triton X-100) and reported in this study. Methods: The dynamic contact angle study of three different types of plant surfactants (Reetha, Shikakai and Acacia) and one synthetic surfactant (Triton X 100) on the glass surface has been carried out. The effect of two different types of alcohols such as Methanol and amyl alcohol on wettability of shikakai, as it shows little higher value of contact angle on glass surface has been measured. Results: The contact angle measurements show that there is an increase in contact angle from 47° (pure water) to 67.72°, 65.57°, 68.84°, and 68.79° for Reetha, Acacia, Shikakai, and Triton X-100 respectively with the increase in surfactant concentration and remain constant at CMC. The change in contact angle of Shikakai-Amyl alcohol mixtures are slightly different than that of methanol-Shikakai mixture, mostly there is a gradual increase in contact angle with the increasing in alcohol concentration. Conclusion: There is no linear relationship between cos θ and inverse of surface tension. There was a linear increase in surface free energy results with increase in concentration as more surfactant molecules were adsorbing at the interface enhancing an increase in contact angle.

Impact of Environmental Degradation on Human Health

2016 ◽  
Vol 3 (1) ◽  
pp. 1 ◽  
Author(s):  
_______ Archana ◽  
Charu Datta ◽  
Pratibha Tiwari
Keyword(s):  
Environmental Degradation ◽  
Human Population ◽  
Environmental Problems ◽  
Population Increase ◽  
Human Beings ◽  
The People ◽  
Wide Range ◽  
Different Types ◽  
Economic Institute ◽  
Day By Day

Degradation of environment is one of the most serious challenges before the mankind in today’s world. Mankind has been facing a wide range of problem arising out of the degradation of environment. Not only the areas under human inhabitation, but the areas of the planet without human population have also been suffering from these problems. As the population increase day by day, the amenities are not improved simultaneously. With the advancement of science and technologies the needs of human beings has been changing rapidly. As a result different types of environmental problems have been rising. Environmental degradation is a wide- reaching problem and it is likely to influence the health of human population is great. It may be defined the deterioration of the environment through depletion of resources such as air, water, and soil. The destruction of ecosystem and extinction of wildlife. Environmental degradation has occurred due to the recent activities in the field of socio-economic, institute and technology. Poverty still remains a problem as the root of several environmental problems to create awareness among the people about the ill effect of environmental pollution. In the whole research it is clear that all factors of environmental degradation may be reduced through- Framing the new laws on environmental degradation, Environment friend policy, Controlling all the ways and means of noise, air, soil and water pollution, Through growing more and more trees and by adapting the proper sanitation policy.  

scholarly journals Portable near Infrared Spectroscopy as a Tool for Fresh Tomato Quality Control Analysis in the Field

2021 ◽  
Vol 11 (7) ◽  
pp. 3209
Author(s):  
Karla R. Borba ◽  
Didem P. Aykas ◽  
Maria I. Milani ◽  
Luiz A. Colnago ◽  
Marcos D. Ferreira ◽  
...  
Keyword(s):  
Citric Acid ◽  
Near Infrared ◽  
Prediction Models ◽  
Quality Attributes ◽  
Internal Quality ◽  
Control Analysis ◽  
Tomato Quality ◽  
Wide Range ◽  
Different Types ◽  
Fresh Tomato

Portable spectrometers are promising tools that can be an alternative way, for various purposes, of analyzing food quality, such as monitoring in a few seconds the internal quality during fruit ripening in the field. A portable/handheld (palm-sized) near-infrared (NIR) spectrometer (Neospectra, Si-ware) with spectral range of 1295–2611 nm, equipped with a micro-electro-mechanical system (MEMs), was used to develop prediction models to evaluate tomato quality attributes non-destructively. Soluble solid content (SSC), fructose, glucose, titratable acidity (TA), ascorbic, and citric acid contents of different types of fresh tomatoes were analyzed with standard methods, and those values were correlated to spectral data by partial least squares regression (PLSR). Fresh tomato samples were obtained in 2018 and 2019 crops in commercial production, and four fruit types were evaluated: Roma, round, grape, and cherry tomatoes. The large variation in tomato types and having the fruits from distinct years resulted in a wide range in quality parameters enabling robust PLSR models. Results showed accurate prediction and good correlation (Rpred) for SSC = 0.87, glucose = 0.83, fructose = 0.87, ascorbic acid = 0.81, and citric acid = 0.86. Our results support the assertion that a handheld NIR spectrometer has a high potential to simultaneously determine several quality attributes of different types of tomatoes in a practical and fast way.

Sign in / Sign up

Export Citation Format

Share Document