A Fast Method for Calculating Dynamic Coefficients of Finite Width Journal Bearings With Quasi Reynolds Boundary Condition

1988 ◽  
Vol 110 (3) ◽  
pp. 387-393 ◽  
Author(s):  
T. Kato ◽  
Y. Hori
Keyword(s):  
Boundary Condition ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Boundary Line ◽  
Finite Width ◽  
Fast Method ◽  
Dynamic Coefficients ◽  
Straight Line ◽  
Time Required ◽  
Stiffness And Damping

This paper presents a fast method for calculating the dynamic coefficients of the finite width journal bearings under quasi Reynolds boundary condition in which the trailing boundary line is given by a straight line and the continuity of bulk flow across this line is ensured. Calculated linear stiffness and damping coefficients agree well with the data of Lund and Thomsen [1]. The time required by this calculation with HITAC M682H is only 0.1–0.3 seconds (about 1/100 of the time required by the ordinary FDM), which suggests the possibility of real time journal bearing designs without using the database of the dynamic coefficients.

Theoretical Condition for the Cxy=Cyx Relation in Fluid Film Journal Bearings

1989 ◽  
Vol 111 (3) ◽  
pp. 426-429 ◽  
Author(s):  
T. Kato ◽  
Y. Hori
Keyword(s):  
Reynolds Equation ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Fluid Film ◽  
Finite Width ◽  
Damping Coefficients ◽  
Dynamic Coefficients ◽  
Cross Terms ◽  
Linear Damping ◽  
Theoretical Condition

A computer program for calculating dynamic coefficients of journal bearings is necessary in designing fluid film journal bearings and an accuracy of the program is sometimes checked by the relation that the cross terms of linear damping coefficients of journal bearings are equal to each other, namely “Cxy = Cyx”. However, the condition for this relation has not been clear. This paper shows that the relation “Cxy = Cyx” holds in any type of finite width journal bearing when these are calculated under the following condition: (I) The governing Reynolds equation is linear in pressure or regarded as linear in numerical calculations; (II) Film thickness is given by h = c (1 + κcosθ); and (III) Boundary condition is homogeneous such as p=0 or dp/dn=0, where n denotes a normal to the boundary.

Influence of Fluid Film Boundary Migration on Dynamic Coefficients of Journal Bearings and Behavior of Rotor System

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Changmin Chen ◽  
Jianping Jing ◽  
Jiqing Cong ◽  
Zezeng Dai ◽  
Jianhua Cheng
Keyword(s):  
Journal Bearing ◽  
Boundary Migration ◽  
Dynamical Behavior ◽  
Journal Bearings ◽  
Rotor System ◽  
Fluid Film ◽  
Dynamic Coefficients ◽  
Film Boundary ◽  
Rotor Bearing ◽  
Stiffness And Damping

Abstract The position of fluid film in journal bearing will change while the journal moving in bearing, which can be named fluid film boundary migration (FFBM). It is usually ignored in the calculation of linear dynamic coefficients. While, the errors brought by this neglection was not ever investigated in detail. In this paper, the influence of FFBM on bearing dynamic coefficients and rotor system dynamic behaviors are investigated. A new perturbation-based model is proposed to take the FFBM into account by modifying the boundary conditions of governing equations. It is then verified by the experimental results and analytical results from previous research. Furthermore, the effects of FFBM on stiffness and damping in two typical journal bearings are investigated. The result indicates that the FFBM has a significant influence on dynamic coefficients of full circular journal bearing but little impact on journal bearing with axial grooves. Moreover, it affects the stiffness and damping more significantly in the cases of large length-to-diameter ratios or small eccentricity ratios in full circle bearing. Finally, the dynamical behavior of a rotor-bearing system with considering the FFBM is also investigated. The result shows that the FFBM of oil film has remarkable influences on the instability threshold and imbalance responses of the rotor system, which should not be ignored. The conclusions obtained in this research are expected to be helpful for the design of full circular journal bearings or rotor-bearing systems.

Nonlinear Dynamics of Flexible Rotors Supported on Journal Bearings—Part I: Analytical Bearing Model

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Mohammad Miraskari ◽  
Farzad Hemmati ◽  
Mohamed S. Gadala
Keyword(s):  
Journal Bearing ◽  
Nonlinear Coefficient ◽  
Journal Bearings ◽  
Flexible Rotor ◽  
Dynamic Coefficients ◽  
Flexible Rotors ◽  
Rotor Bearing ◽  
Bearing Force ◽  
Derivatives Of ◽  
Bearing System

To determine the bifurcation types in a rotor-bearing system, it is required to find higher order derivatives of the bearing forces with respect to journal velocity and position. As closed-form expressions for journal bearing force are not generally available, Hopf bifurcation studies of rotor-bearing systems have been limited to simple geometries and cavitation models. To solve this problem, an alternative nonlinear coefficient-based method for representing the bearing force is presented in this study. A flexible rotor-bearing system is presented for which bearing force is modeled with linear and nonlinear dynamic coefficients. The proposed nonlinear coefficient-based model was found to be successful in predicting the bifurcation types of the system as well as predicting the system dynamics and trajectories at spin speeds below and above the threshold speed of instability.

Steady-State and Dynamic Behaviour of Multi-Recess Hybrid Oil Journal Bearings

1979 ◽  
Vol 21 (5) ◽  
pp. 345-351 ◽  
Author(s):  
M. K. Ghosh ◽  
B. C. Majumdar ◽  
J. S. Rao
Keyword(s):  
Perturbation Theory ◽  
Steady State ◽  
Theoretical Analysis ◽  
Dynamic Behaviour ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Time Dependent ◽  
Damping Coefficients ◽  
Stiffness And Damping

A theoretical analysis of the steady-state and dynamic characteristics of multi-recess hybrid oil journal bearings is presented. A perturbation theory for small vibrations is used to solve an incompressible, finite journal bearing with a time-dependent term. Load capacity, attitude angle, friction parameter, stiffness and damping coefficients are evaluated for a capillary-compensated bearing.

The Hydrodynamic Lubrication of Rough Journal Bearings

1973 ◽  
Vol 95 (2) ◽  
pp. 166-172 ◽  
Author(s):  
H. Christensen ◽  
K. Tonder
Keyword(s):  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Journal Bearings ◽  
Hydrodynamic Theory ◽  
Finite Width ◽  
Hydrodynamic Theory Of Lubrication

In a number of previous papers a hydrodynamic theory of lubrication of rough bearing surfaces has been developed. The present paper describes the application of this theory to the analysis of the full journal bearing of finite width. The analysis demonstrates how the roughness influences the characteristics of the bearing and also shows how roughness interacts with features of nominal geometry and operating factors to determine the bearing response.

Nonlinear Dynamic Oil-Film Forces in Infinite-Short Journal Bearings

2011 ◽  
Author(s):  
Lihua Yang ◽  
Weimin Wang ◽  
Lie Yu
Keyword(s):  
Nonlinear Dynamic ◽  
Reynolds Equation ◽  
Journal Bearing ◽  
Analytic Solutions ◽  
Journal Bearings ◽  
Oil Film ◽  
Dynamic Coefficients ◽  
Representation Model ◽  
Linear And Nonlinear

In this paper, the analytic solutions of oil-film forces in infinite-short cylindrical journal bearing are calculated by solving its corresponding Reynolds equation. On this base, the linear and nonlinear dynamic coefficients of the bearing are predicted. By comparing the dynamic oil-film forces approximately represented by dynamic coefficients with the analytic solutions, the accuracy of this representation model is investigated. The results show that more orders of dynamic coefficients are included in representation model, the obtained approximate oil-film forces are more close to their analytic solutions. This can be a reference to illustrate the feasibility and applicability of representing oil-film forces by applying the dynamic coefficients of bearings.

Performance Characteristics of Finite Width Journal Bearings Under the Separation Boundary Condition

1986 ◽  
Vol 108 (2) ◽  
pp. 178-183 ◽  
Author(s):  
M. Nakai ◽  
T. Kazamaki ◽  
T. Hatake
Keyword(s):  
Boundary Condition ◽  
Journal Bearings ◽  
Performance Characteristics ◽  
Experimental Results ◽  
Finite Width ◽  
Separation Boundary ◽  
Physical Consideration ◽  
Calculation Results

The separation boundary condition is considered to be comparatively exact in the physical consideration of the supposition. The calculated performance characteristics applied to infinite width journal bearings are related to experimental results to some extent. However, performance characteristics applied to finite width journal bearings, which might be able to explain the experimental results more precisely, have been unknown. The present paper describes the application of the separation boundary condition to finite width journal bearings, and calculation results of some performance characteristics. The results are related to well-known experimental results in several respects.

A method to obtain the linear dynamic coefficients for journal bearing in vertical rotors

2019 ◽  
Vol 72 (1) ◽  
pp. 38-45 ◽  
Author(s):  
Changmin Chen ◽  
Jianping Jing ◽  
Jiqing Cong
Keyword(s):  
Coordinate System ◽  
Linear Models ◽  
Journal Bearing ◽  
Leading Edge ◽  
Content Type ◽  
Linear Dynamic ◽  
Dynamic Coefficients ◽  
Vertical Rotor ◽  
Rotor Bearing ◽  
Stiffness And Damping

Purpose The infinitesimal perturbation (IP) method is commonly used in calculating stiffness and damping of journal bearing in horizon rotor systems. The boundary condition (BC) for the perturbed pressure is assumed being zero at leading edge of film, although it is usually not zero because of nonzero pressure gradient. This assumption is sufficiently accurate for most purpose in horizon rotors. However, for journal bearing in vertical rotor-bearing systems, the BC with the assumption in IP method will bring in significant errors in calculating linear dynamic coefficients. This paper aims to propose a method to obtain the dynamic coefficients of journal bearing in vertical rotors. Design/methodology/approach The stiffness and damping are approached based on IP method and the modified BC of perturbed pressure. As it is difficult to predict perturbed pressure at leading edge at a fixed coordinate system using IP method, a dynamic coordinate system is introduced in this method, of which the origin on circumferential direction is defined as the leading edge of film. Findings The effectiveness and accuracy of proposed IP method in dynamic coordinate (IPMDC) system are verified by comparing the obtained results with analytical solutions. The comparison shows that the results from IPMDC present a good agreement with the analytic solutions. Originality/value The proposed method can be applied in obtaining linear dynamic coefficients of journal bearing in vertical rotors with high precisions. Instead of the usual nonlinear analysis of vertical rotors, this method provides a feasibility of predicting the instability threshold of vertical rotor-bearing systems via linear models.

Sign in / Sign up

Export Citation Format

Share Document