A New Matrix Method for the Kinematic Analysis and Motion Simulation of Planar Mechanisms With Lower Pairs

1984 ◽  
Vol 106 (4) ◽  
pp. 429-436 ◽  
Author(s):  
P. D. Sparis ◽  
S. G. Mouroutsos
Keyword(s):  
Kinematic Analysis ◽  
Matrix Method ◽  
Degrees Of Freedom ◽  
Motion Simulation ◽  
Planar Mechanisms ◽  
Third Order ◽  
Simulation Procedure ◽  
Improved Accuracy ◽  
Minimal Member

This paper presents a new matrix method for the kinematic analysis and the determination of the velocities, accelerations and jerks for planar mechanisms incorporating rolling, sliding, and pivoting members with a single or multiple degrees of freedom. It also presents a motion simulation procedure that uses the results of the kinematic analysis to estimate the successive positions of the members during the cycle of operation of the mechanism, with third order accuracy in time. Due to the improved accuracy, the proposed motion simulation procedure presents minimal member distortion caused by the accumulation of numerical errors, and does not require iterations for its convergence.

scholarly journals Some aspects of topology and kinematics of a 3DOF translational parallel mechanism

2014 ◽  
Vol 19 (1) ◽  
pp. 5-15 ◽  
Author(s):  
J. Bałchanowski
Keyword(s):  
Kinematic Analysis ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Analytical Procedure ◽  
Method Of Determination ◽  
Fixed Orientation ◽  
Three Degrees Of Freedom ◽  
Selection Of

Abstract The paper presents elements of the topology, geometry and the kinematic analysis of a translational parallel mechanism with three degrees of freedom. In such mechanisms the selection of a proper structure and geometry ensures that the driven link maintains a fixed orientation relative to the base. The method of determination of the configuration of mechanisms using contour vector notation was elaborated in the paper. The equations for the analysis of the direct and inverse kinematics task are determined. An analytical procedure for determining the system’s singular positions is presented and illustrated with examples

Kinematic Approximations in TED and RHEED Analysis of Reconstructed Surfaces

1990 ◽  
Vol 48 (2) ◽  
pp. 396-397
Author(s):  
L. -M. Peng ◽  
M. J. Whelan
Keyword(s):  
Electron Diffraction ◽  
Kinematic Analysis ◽  
Incident Beam ◽  
High Energy ◽  
Energy Electron ◽  
Great Success ◽  
High Energy Electron ◽  
Kinematic Approximation ◽  
Reconstructed Surfaces

In recent years there has been a trend in the structure determination of reconstructed surfaces to use high energy electron diffraction techniques, and to employ a kinematic approximation in analyzing the intensities of surface superlattice reflections. Experimentally this is motivated by the great success of the determination of the dimer adatom stacking fault (DAS) structure of the Si(111) 7 × 7 reconstructed surface.While in the case of transmission electron diffraction (TED) the validity of the kinematic approximation has been examined by using multislice calculations for Si and certain incident beam directions, far less has been done in the reflection high energy electron diffraction (RHEED) case. In this paper we aim to provide a thorough Bloch wave analysis of the various diffraction processes involved, and to set criteria on the validity for the kinematic analysis of the intensities of the surface superlattice reflections.The validity of the kinematic analysis, being common to both the TED and RHEED case, relies primarily on two underlying observations, namely (l)the surface superlattice scattering in the selvedge is kinematically dominating, and (2)the superlattice diffracted beams are uncoupled from the fundamental diffracted beams within the bulk.

Analysis and Optimization of a New Differentially Driven Cable Parallel Robot

2015 ◽  
Vol 7 (3) ◽  
Author(s):  
Hamed Khakpour ◽  
Lionel Birglen ◽  
Souheil-Antoine Tahan
Keyword(s):  
Kinematic Analysis ◽  
Design Methodology ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Cable Robot ◽  
Proper Design ◽  
Two Indices ◽  
Three Degrees Of Freedom ◽  
Cable Robots

In this paper, a new three degrees of freedom (DOF) differentially actuated cable parallel robot is proposed. This mechanism is driven by a prismatic actuator and three cable differentials. Through this design, the idea of using differentials in the structure of a spatial cable robot is investigated. Considering their particular properties, the kinematic analysis of the robot is presented. Then, two indices are defined to evaluate the workspaces of the robot. Using these indices, the robot is subsequently optimized. Finally, the performance of the optimized differentially driven robot is compared with fully actuated mechanisms. The results show that through a proper design methodology, the robot can have a larger workspace and better performance using differentials than the fully driven cable robots using the same number of actuators.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Investigation of Train Dynamics in Passing Through Curves Using a Full Model

Joint Rail ◽  
2004 ◽  
Author(s):  
Mohammad Durali ◽  
Mohammad Mehdi Jalili Bahabadi
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Full Model ◽  
Bogie Frame ◽  
Nonlinear Characteristics ◽  
Train Derailment ◽  
Train Dynamics

In this article a train model is developed for studying train derailment in passing through bends. The model is three dimensional, nonlinear, and considers 43 degrees of freedom for each wagon. All nonlinear characteristics of suspension elements as well as flexibilities of wagon body and bogie frame, and the effect of coupler forces are included in the model. The equations of motion for the train are solved numerically for different train conditions. A neural network was constructed as an element in solution loop for determination of wheel-rail contact geometry. Derailment factor was calculated for each case. The results are presented and show the major role of coupler forces on possible train derailment.

A NUCLEAR MANY-BODY THEORY AT FINITE TEMPERATURE APPLIED TO A PROTONEUTRON STAR

2002 ◽  
Vol 11 (02) ◽  
pp. 83-104 ◽  
Author(s):  
GUILHERME F. MARRANGHELLO ◽  
CESAR A. Z. VASCONCELLOS ◽  
MANFRED DILLIG ◽  
J. A. DE FREITAS PACHECO
Keyword(s):  
Phase Transition ◽  
Nuclear Matter ◽  
Finite Temperature ◽  
Degrees Of Freedom ◽  
Many Body ◽  
Many Body Theory ◽  
The Masses ◽  
Protoneutron Stars ◽  
Protoneutron Star

Thermodynamical properties of nuclear matter are studied in the framework of an effective many-body field theory at finite temperature, considering the Sommerfeld approximation. We perform the calculations by using the nonlinear Boguta and Bodmer model, extended by the inclusion of the fundamental baryon octet and leptonic degrees of freedom. Trapped neutrinos are also included in order to describe protoneutron star properties through the integration of the Tolman–Oppenheimer–Volkoff equations, from which we obtain, beyond the standard relations for the masses and radii of protoneutron stars as functions of the central density, new results of these quantities as functions of temperature. Our predictions include: the determination of an absolute value for the limiting mass of protoneutron stars; new structural aspects on the nuclear matter phase transition via the behavior of the specific heat and, through the inclusion of quark degrees of freedom, the properties of a hadron-quark phase transition and hybrid protoneutron stars

Determination of the Instantaneous Pole Axes in Single-DOF Spherical Mechanisms

2008 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
A Algorithm ◽  
Planar Mechanisms ◽  
Spherical Mechanisms ◽  
Kinematic Behavior ◽  
General Method

In spherical mechanisms, the instantaneous pole axes play the same role as the instant centers in planar mechanisms. Notwithstanding this, they are not fully exploited to study the kinematic behavior of spherical mechanisms as the instant centers are for planar mechanisms. The first step to make their use possible and friendly is the availability of efficient techniques to determine them. This paper presents a general method to determine the instantaneous pole axes in single-dof spherical mechanisms as a function of the mechanism configuration. The presented method is directly deduced from a algorithm already proposed by the author for the determination of the instant centers in single-dof planar mechanisms.

A Hybrid Highly Parallelizable Algorithm for the Dynamics of Rigid Body Chain Systems

1999 ◽  
Author(s):  
Shanzhong Duan ◽  
Kurt S. Anderson
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
High Efficiency ◽  
Equations Of Motion ◽  
Constraint Forces ◽  
Dynamics Of Rigid Body ◽  
A Chain ◽  
Explicit Determination ◽  
Order Algorithm

Abstract The paper presents a new hybrid parallelizable low order algorithm for modeling the dynamic behavior of multi-rigid-body chain systems. The method is based on cutting certain system interbody joints so that largely independent multibody subchain systems are formed. These subchains interact with one another through associated unknown constraint forces f¯c at the cut joints. The increased parallelism is obtainable through cutting the joints and the explicit determination of associated constraint loads combined with a sequential O(n) procedure. In other words, sequential O(n) procedures are performed to form and solve equations of motion within subchains and parallel strategies are used to form and solve constraint equations between subchains in parallel. The algorithm can easily accommodate the available number of processors while maintaining high efficiency. An O[(n+m)Np+m(1+γ)Np+mγlog2Np](0<γ<1) performance will be achieved with Np processors for a chain system with n degrees of freedom and m constraints due to cutting of interbody joints.

A Method for Type Synthesis of Mechanisms Using Phase Diagrams

1994 ◽  
Author(s):  
Sio-Hou Lei ◽  
Ying-Chien Tsai
Keyword(s):  
Phase Diagram ◽  
Degrees Of Freedom ◽  
Practical Application ◽  
Type Synthesis ◽  
Planar Mechanisms ◽  
Simple Loop ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Spatial Mechanisms ◽  
Synthesis Of Mechanisms

Abstract A method for synthesizing the types of spatial as well as planar mechanisms is expressed in this paper by using the concept of phase diagram in metallurgy. The concept represented as a type synthesis technique is applied to (a) planar mechanisms with n degrees of freedom and simple loop, (b) spatial mechanisms with single degree of freedom and simple loop, to enumerate all the possible mechanisms with physically realizable kinematic pairs. Based on the technique described, a set of new reciprocating mechanisms is generated as a practical application.

TSDT theory for free vibration of functionally graded plates with various material properties

2021 ◽  
Vol 8 (4) ◽  
pp. 691-704
Author(s):  
M. Janane Allah ◽  
◽  
Y. Belaasilia ◽  
A. Timesli ◽  
A. El Haouzi ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Volume Fraction ◽  
Equations Of Motion ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Third Order ◽  
Implicit Algorithm ◽  
Proposed Model ◽  
Graded Material ◽  
Composite Modeling

In this work, an implicit algorithm is used for analyzing the free dynamic behavior of Functionally Graded Material (FGM) plates. The Third order Shear Deformation Theory (TSDT) is used to develop the proposed model. In this contribution, the formulation is written without any homogenization technique as the rule of mixture. The Hamilton principle is used to establish the resulting equations of motion. For spatial discretization based on Finite Element Method (FEM), a quadratic element with four and eight nodes is adopted using seven degrees of freedom per node. An implicit algorithm is used for solving the obtained problem. To study the accuracy and the performance of the proposed approach, we present comparisons with literature and laminate composite modeling results for vibration natural frequencies. Otherwise, we examine the influence of the exponent of the volume fraction which reacts the plates "P-FGM" and "S-FGM". In addition, we study the influence of the thickness on "E-FGM" plates.

Sign in / Sign up

Export Citation Format

Share Document