Augmentation of Laminar Forced-Convective Heat Transfer by the Application of a Transverse Electric Field

1989 ◽  
Vol 111 (2) ◽  
pp. 345-351 ◽  
Author(s):  
T. Fujino ◽  
Y. Yokoyama ◽  
Y. H. Mori
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Electric Field ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Heat Transfer Surface ◽  
Test Fluid ◽  
Uniform Heat Flux ◽  
Forced Convective Heat Transfer ◽  
Weakly Conducting

The effect of a uniform d-c electric field on laminar forced-convective heat transfer has been studied experimentally with a weakly conducting fluorocarbon refrigerant in the liquid state that is flowing in a channel confined by parallel-plate electrodes, one of which serves as a heat transfer surface of uniform heat flux. The dependencies of the heat transfer coefficient and the pressure drop on the sign and the magnitude of an applied voltage, the heat flux at the heat transfer surface, the electrical conductivity of the test fluid, etc. are presented, and the structure and the mechanism of the electroconvection causing the heat transfer enhancement are considered.

Analysis of flow and heat transfer over stretching/shrinking and porous surfaces

2021 ◽  
pp. 875608792110258
Author(s):  
Azhar Ali ◽  
Dil Nawaz Khan Marwat ◽  
Aamir Ali
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Current Model ◽  
Uniform Heat Flux ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Special Cases ◽  
Porous Surfaces

Flows and heat transfer over stretching/shrinking and porous surfaces are studied in this paper. Unusual and generalized similarity transformations are used for simplifying governing equations. Current model includes all previous cases of stretched/shrunk flows with thermal effects discussed so far. Moreover, we present three different cases of thermal behavior (i) prescribed surface temperature (ii) Variable/uniform convective heat transfer at plat surface and (iii) prescribed variable/uniform heat flux. Stretching/shrinking velocity Uw(x), porosity [Formula: see text], heat transfer [Formula: see text], heat flux [Formula: see text] and convective heat transfer at surface are axial coordinate dependent. Boundary layer equations and boundary conditions are transformed into nonlinear ODEs by introducing unusual and generalized similarity transformations for the variables. These simplified equations are solved numerically. Final ODEs represent suction/injection, stretching/shrinking, temperature, heat flux, convection effects and specific heat. This current problem encompasses all previous models as special cases which come under the scope of above statement (title). The results of classical models are scoped out as a special case by assigning proper values to the parameters. Numerical result shows that the dual solutions can be found for different possible values of the shrinking parameter. A stability analysis is accomplished and apprehended in order to establish a criterion for determining linearly stable and physically compatible solutions. The significant features and diversity of the modeled equations are scrutinized by recovering the previous problems of fluid flow and heat transfer from a uniformly heated sheet of variable (uniform) thickness with variable (uniform) stretching/shrinking and injection/suction velocities.

Investigation on Convective Heat Transfer over a Rotating Disk with Bottom Wall Subjected to Uniform Heat Flux

2012 ◽  
Vol 249-250 ◽  
pp. 443-451
Author(s):  
Jing Zhou Zhang ◽  
Xiao Ming Tan ◽  
Xing Dan Zhu
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Numerical Study ◽  
Rotating Disk ◽  
Outer Radius ◽  
Bottom Wall ◽  
Uniform Heat Flux ◽  
Uniform Heat

A three-dimensional numerical study on the flow and heat transfer characteristics over a rotating disk with bottom wall subjected to uniform heat flux was conducted with the use of RNG k- turbulent model. And some experiments were also made for validation. The effects of rotating angular speed and pin configuration on the temperature maps and convective heat transfer characte-ristics on rotating surface are analyzed. As the increase of rotating velocity, the impingement of pumping jet on the centre of rotating disk became stronger and the transition from laminar to turbu-lent occurred at the outer radius of rotating disk, which resulted in heat transfer enhancement. The pins on the disk made the pumping action of a rotating disk weaker. Simultaneously, they also acted as disturbing elements to the cyclone flow near the rotating disk surface, which made the overall heat transfer to be enhanced. Under the same extend areas of different pins, needle pin has higher convective heat transfer capacity than the discrete ring pin.

Sign in / Sign up

Export Citation Format

Share Document