Heat Transfer by Natural Convection of Helium Between Horizontal Isothermal Concentric Cylinders at Cryogenic Temperature

1988 ◽  
Vol 110 (1) ◽  
pp. 109-115 ◽  
Author(s):  
E. H. Bishop
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Transfer Rate ◽  
Correlation Equation ◽  
Diameter Ratio ◽  
Temperature Profiles ◽  
Cryogenic Temperatures ◽  
Transfer Rates ◽  
Concentric Cylinders

An experimental study was performed of the heat transfer by natural convection of helium between horizontal isothermal concentric cylinders at cryogenic temperatures. Time-averaged temperature profiles at various locations in the annulus and overall heat transfer rates were measured as the Rayleigh number was varied from 6 × 106 to 2 × 109 and the expansion number from 0.20 to 1.0 for a constant Prandtl number of 0.688 and diameter ratio of 3.36. It was found that the heat transfer rate depends on the magnitude of the expansion number as well as on the magnitude of the Rayleigh number. With gas properties evaluated at a volume-weighted reference temperature, a correlation equation is presented that correlates the heat transfer data with maximum deviations of −8.2 and +8.5 percent. The results of this study are compared with previously published studies of other investigators.

Design of a Plane-Type Bidirectional Thermal Diode

1988 ◽  
Vol 110 (4) ◽  
pp. 299-305 ◽  
Author(s):  
K. Chen
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Transfer Rate ◽  
Reverse Bias ◽  
Energy Utilization ◽  
Heat Transfer Analysis ◽  
Transfer Rates ◽  
One Dimensional ◽  
Plane Type ◽  
Solar Energy Utilization

The design of a plane-type, bidirectional thermal diode is presented. This diode is composed of two vertical plates and several fluid-filled loops with their horizontal segments soldered to the vertical plates. This invention is simple in construction and low in cost. The direction of heat transfer in the invented thermal diode can be easily reversed. These features of the present invention make it very attractive to solar energy utilization. Natural convection analysis for thermosyphon operations was adopted for heat transfer calculations of the fluid-filled loops. A one-dimensional heat transfer analysis was employed to estimate the heat transfer rate and ratio of heat transfer rates of the diode under forward and reverse bias.

scholarly journals A RANS K-? SIMULATION OF 2D TURBULENT NATURAL CONVECTION IN AN ENCLOSURE WITH HEATING SOURCES

2019 ◽  
Vol 20 (1) ◽  
pp. 229-244
Author(s):  
Mehdi Ahmadi ◽  
Seyed Ali Agha Mirjalily ◽  
Seyed Amir Abbas Oloomi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Kinetic Energy ◽  
Aspect Ratio ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Turbulent Natural Convection ◽  
Cold Source ◽  
Thermal Sources

ABSTRACT: This study is conducted to investigate turbulent natural convection flow in an enclosure with thermal sources using the low-Reynolds number (LRN) k-? model. This enclosure has a cold source with temperature Tc and a hot source with temperature Th as thermal sources, other walls of the enclosure are adiabatic. The aim of this study is to predict the effect of change in Rayleigh number, repositioning of cold and hot sources, and thermal sources aspect ratio on the flow field, temperature, and rate of heat transfer. To achieve this aim, the equations of continuity, momentum, energy, turbulent kinetic energy, and kinetic energy dissipation are employed in the case of 2D turbulence with constant thermo-physical properties except the density in the buoyancy term (Boussinesq approximation). To numerically solve these equations, the finite volume method and SIMPLE algorithm are used. According to the modeling results, the most optimal temperature distribution in the enclosure is seen when the hot source is below the cold source. With decreasing distance between hot and cold sources, heat transfer rate increases. The maximal heat transfer rate is derived via study of the heating sources aspect ratio. In constant positions of cold and hot sources on a wall, the heat transfer rate increases with increasing Rayleigh number (Ra=109-1011). ABSTAK: Kajian ini dijalankan bagi mengkaji perubahan semula jadi aliran perolakan dalam tempat tertutup dengan sumber haba menggunakan model k-? nombor Reynolds-rendah (LRN). Bekas tertutup ini mempunyai dua sumber haba iaitu sumber sejuk dengan suhu Tc dan sumber panas dengan suhu Th, manakala dinding lain bekas ini adalah adiabatik. Tujuan kajian ini adalah bagi mengesan perubahan nombor Rayleigh, mengubah sumber sejuk dan panas dan nisbah sumber haba kepada kawasan aliran, suhu dan halaju perubahan haba. Bagi mencapai tujuan tersebut, persamaan sambungan, momentum, tenaga, tenaga kinetik perolakan, dan pengurangan tenaga kinetik telah dilaksanakan dalam kes perolakan 2D dengan sifat fizikal-haba berterusan (malar) kecuali isipadu terma keapungan (anggaran Boussinesq). Bagi menyelesaikan persamaan ini secara berangka, kaedah isipadu terhad dan algorithma MUDAH telah digunakan. Berdasarkan keputusan model, suhu distribusi optimal dalam bekas tertutup dilihat apabila sumber panas adalah kurang daripada sumber sejuk. Dengan pengurangan jarak antara sumber panas dan sejuk, kadar pertukaran haba meningkat. Kadar pertukaran haba maksima telah diperoleh melalui kajian nisbah  aspek sumber pemanasan. Kadar pertukaran haba bertambah dengan bertambahnya nombor Rayleigh  (Ra=109-1011), pada posisi tetap sumber sejuk dan panas pada dinding bekas.

scholarly journals Natural convection in a Square Enclosure with Partially Active Vertical Wall

2020 ◽  
Vol 330 ◽  
pp. 01004
Author(s):  
Abdennacer Belazizia ◽  
Smail Benissaad ◽  
Said Abboudi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Vertical Wall ◽  
Left Wall ◽  
Convection And Heat Transfer ◽  
Square Enclosure ◽  
Active Location

Steady, laminar, natural convection flow in a square enclosure with partially active vertical wall is considered. The enclosure is filled with air and subjected to horizontal temperature gradient. Finite volume method is used to solve the dimensionless governing equations. The physical problem depends on three parameters: Rayleigh number (Ra =103-106), Prandtl number (Pr=0.71), and the aspect ratio of the enclosure (A=1). The active location takes two positions in the left wall: top (T) and middle (M). The main focus of the study is on examining the effect of Rayleigh number on fluid flow and heat transfer rate. The results including the streamlines, isotherm patterns, flow velocity and the average Nusselt number for different values of Ra. The obtained results show that the increase of Ra leads to enhance heat transfer rate. The fluid particles move with greater velocity for higher thermal Rayleigh number. Also by moving the active location from the top to the middle on the left vertical wall, convection and heat transfer rate are more important in case (M). Furthermore for high Rayleigh number (Ra=106), Convection mechanism in (T) case is principally in the top of the enclosure, whereas in the remaining case it covers the entire enclosure.

Natural Convection Heat Transfer From a Cylinder With High Conductivity Permeable Fins

2003 ◽  
Vol 125 (2) ◽  
pp. 282-288 ◽  
Author(s):  
Bassam A/K Abu-Hijleh
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Convection Heat Transfer ◽  
High Heat ◽  
Horizontal Cylinder ◽  
High Conductivity ◽  
Transfer Rates ◽  
High Heat Transfer ◽  
Wide Range

The problem of laminar natural convection from a horizontal cylinder with multiple equally spaced high conductivity permeable fins on its outer surface was investigated numerically. The effect of several combinations of number of fins and fin height on the average Nusselt number was studied over a wide range of Rayleigh number. Permeable fins provided much higher heat transfer rates compared to the more traditional solid fins for a similar cylinder configuration. The ratio between the permeable to solid Nusselt numbers increased with Rayleigh number, number of fins, and fin height. This ratio was as high as 8.4 at Rayleigh number of 106, non-dimensional fin height of 2.0, and with 11 equally spaced fins. The use of permeable fins is very advantageous when high heat transfer rates are needed such as in today’s high power density electronic components.

Numerical Investigation of Variable Property Effects on Laminar Natural Convection of Gases Between Two Horizontal Isothermal Concentric Cylinders

1986 ◽  
Vol 108 (4) ◽  
pp. 783-789 ◽  
Author(s):  
D. N. Mahony ◽  
R. Kumar ◽  
E. H. Bishop
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Boussinesq Approximation ◽  
Variable Properties ◽  
Transfer Rates ◽  
Concentric Cylinders ◽  
Weighted Mean Temperature ◽  
Laminar Natural Convection ◽  
Rayleigh Numbers ◽  
Gap Width

A numerical finite difference investigation has been conducted to determine the effects of variable properties on the laminar natural convection of gases between horizontal isothermal concentric cylinders. Velocity profiles, temperature profiles, and heat transfer rates have been computed for diameter ratios of 1.5, 2.28, 2.6, and 5.0 and Rayleigh numbers based on gap width up to 1.8 × 105. The temperature difference ratio θo was varied from 0.2 to 3.0, and the range of validity of the Boussinesq approximation was determined to be θo = 0.2. A volume-weighted mean temperature was shown to be the most effective reference temperature to reduce the heat transfer data for each diameter ratio to a single curve of the form keq = C RaLn, for 0.2 ≤ θo ≤ 3.0 and RaL = 2.0 × 105.

Investigation of Natural Convection in Partially Divided Rectangular Enclosures Both With and Without an Opening in the Partition Plate: Measurement Results

1990 ◽  
Vol 112 (3) ◽  
pp. 648-652 ◽  
Author(s):  
K. S. Chen ◽  
A. C. Ku ◽  
C. H. Chou
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Recirculation Zone ◽  
Laser Doppler Velocimeter ◽  
Measurement Results ◽  
Opening Ratio ◽  
Vertical Walls

Experimental results are presented for steady natural convection in a two-dimensional, partially divided, rectangular enclosure, in which two of the vertical walls were maintained at different uniform temperatures and the top and bottom walls were insulated. The partition plate was adiabatic, and the experiment was carried out both with and without an opening in the partition. Rayleigh numbers ranging from 106 to 108 and opening ratios of 0, 1/8, and 1/4 were investigated for an enclosure aspect ratio (length/height) of 2 and Prandtl number of 7 (for water). Local velocity and temperature measurements were made with a laser-Doppler velocimeter and thermocouple probes. Flow visualization using colored dye was also performed. Results show that there was a recirculation zone in the upper and left quadrant of the enclosure when there was no opening in the partition plate. With an opening in the partition, the recirculation zone was absent and the heat transfer rate increased. An unopened partial obstruction would reduce the heat transfer rate by an amount of 12 to 30 percent depending on the Rayleigh number. However, the opening seems to have little effect on the velocity and temperature profiles of the left-moving fluid on the bottom wall. A correlation of the Nusselt number is derived, which shows that the heat transfer rate increases as the Rayleigh number or opening ratio increases.

Natural Convection Experiments in a Stratified Liquid-Saturated Porous Medium

1986 ◽  
Vol 108 (3) ◽  
pp. 660-666 ◽  
Author(s):  
D. C. Reda
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Porous Media ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Saturated Porous Medium ◽  
High Permeability ◽  
Transfer Rates ◽  
Variable Porosity ◽  
Radial Extent

Natural convection heat transfer from a constant-flux cylinder, immersed vertically through a stratified (two-layer) liquid-saturated porous medium, was investigated experimentally. Measured radial temperature profiles and heat transfer rates agreed well with numerical predictions based on the work of Hickox and Gartling. The 1:6 permeability-ratio interface existing between the two layers was found to effectively trap buoyancy-driven fluid motion within the high-permeability region, beneath the interface. Within this high-permeability region, Nusselt number versus Rayleigh number data were found to correlate with previously measured results, obtained for the same basic geometry, but with a fully permeable upper-surface hydrodynamic boundary condition. In both cases, the vertical and radial extent of the region under study were large compared to the radius of the heat source. Combined results indicate that, for a given Rayleigh number in the Darcy-flow regime, heat transfer rates from cylinders immersed vertically in uniform liquid-saturated porous media of large vertical and radial extent potentially approach limiting values. Variable-porosity effects which occur in unconsolidated porous media adjacent to solid boundaries were investigated numerically for cases where the particle-to-heater diameter ratio was small (≈ 10−2). Results showed variable-porosity effects to have a negligible influence on the thermal field adjacent to such boundaries under conditions of Darcy flow.

Heat Transfer by Natural Convection From an Array of Short, Wall-Attached Horizontal Cylinders

1982 ◽  
Vol 104 (1) ◽  
pp. 125-131 ◽  
Author(s):  
E. M. Sparrow ◽  
D. S. Cook ◽  
G. M. Chrysler
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Vertical Plate ◽  
Diameter Ratio ◽  
Nusselt Numbers ◽  
Cylinder Length ◽  
Horizontal Cylinders ◽  
Length To Diameter Ratio

Per-cylinder natural convection Nusselt numbers were measured for an in-line array of short horizontal cylinders that were affixed to a convectively participating vertical plate. The effect of cylinder length-to-diameter ratio, intercylinder spacing, position at which the cylinder is attached to the vertical plate, and Rayleigh number were investigated. The experiments were performed in air. It was found that the extent to which a given cylinder in the array was affected by cylinders situated below it depended on the Rayleigh number, with enhanced heat transfer coefficients being more likely at higher Rayleigh numbers. Greater enhancement occurred at larger intercylinder spacings. The qualitative characteristics of the Nusselt number results were insensitive to the cylinder length-to-diameter ratio, but the longer cylinders exhibited higher values of the Nusselt number. For the most part, the Nusselt numbers for the wall-attached horizontal cylinders fell below those for the classical horizontal cylinder of infinite length.

scholarly journals Numerical Investigation of Natural Convection Flow in a Hexagonal Enclosure Having Vertical Fin

2019 ◽  
Vol 11 (2) ◽  
pp. 173-183 ◽  
Author(s):  
M. Fayz -Al- Asad ◽  
M. M. A. Sarker ◽  
M. J. H. Munshi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Transfer Rate ◽  
Numerical Study ◽  
Bottom Wall ◽  
Convection Flow ◽  
Temperature Profiles ◽  
Natural Convection Flow ◽  
Fin Efficiency

Numerical study of natural convection flow in a hexagonal enclosure with a single vertical fin attached to its heated bottom wall has been carried out. Finite element method based Galerkin weighted residual technique is used to solve the governing equation. The horizontal walls of the enclosure are kept at constant high temperature while the inclined walls are kept at constant cold temperature. A vertical heated fin is attached to the hot bottom wall with a length  at a position  from the left surface having thickness . The Prandlt number for the flow inside the enclosure is 0.71. The results of the problem are presented in graphical and tabular forms and discussed. The fin efficiency and temperature distribution were examined. The numerical results indicate the strong influence of the mentioned parameters on the flow structure and heat transfer as well as temperature. A set of graphical results are presented in terms of streamlines, isotherms contour, temperature profiles, velocity profiles, local Nusselt number and average Nusselt number. The obtained results indicated that the heat transfer rate increases with the increase of Rayleigh number in a hexagonal enclosure. The results are validated comparing with the published works.

scholarly journals THE ROLE OF CONCAVE WALLS OF INNER CYLINDER ON NATURAL CONVECTION IN ANNULAR SPACE

2020 ◽  
Vol 3 (2) ◽  
pp. 24-28
Author(s):  
Houssem Laidoudi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Transfer Rate ◽  
Physical Parameters ◽  
Geometrical Parameters ◽  
Annular Space ◽  
Square Cylinder ◽  
Square Cylinders

The objective of the present research is to provide correct results of the roles of physical and geometrical parameters on the natural convection in an annular space of square cylinders. The physical parameters of the fluid are considered as follow: Prandtl number (0.71, 7.01, 50 and 100) and Rayleigh number (10 power 3, and 10 power 4). However, the studied geometrical modification is based on converting the walls of inner square cylinder from the straight form to the concave form. The work is well done numerically. The predicted results are mainly shown as representative contours of streamlines and isotherms. It was understood that the concave walls of inner cylinder reduces the heat transfer rate that can be useful to use this form in insulating applications instead of straight walls.

Sign in / Sign up

Export Citation Format

Share Document