Turbulent Flow and Heat Transfer in Bends of Circular Cross Section: II—Pressure Distribution Experiments

1986 ◽  
Vol 108 (1) ◽  
pp. 212-216 ◽  
Author(s):  
G. M. Chrysler ◽  
E. M. Sparrow
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Pressure Distribution ◽  
Cross Section ◽  
Circular Cross Section ◽  
Flow And Heat Transfer

Fluid Flow and Heat Transfer Characteristics in the Entrance Regions of Circular Pipes

1985 ◽  
Author(s):  
S. Lloyd ◽  
A. Brown
Keyword(s):  
Heat Transfer ◽  
Cross Section ◽  
Circular Cross Section ◽  
Flow Visualisation ◽  
Pressure Measurements ◽  
Hot Wire ◽  
Heat Transfer Characteristics ◽  
Number Range ◽  
Flow And Heat Transfer ◽  
Circular Pipes

This paper describes the results of an experimental investigation into the velocity and turbulence fields and to a lesser extent the heat transfer in the entrance regions of short, circular cross-section pipes with length to diameter ratios up to 20 over the Reynolds number range from 35,000 to 170,000. The velocity and turbulence fields were measured by hot-wire anemometers backed up with pressure measurements and flow visualisation and the heat transfer by heat flux meters.

scholarly journals Experimental Study and Conjugate Heat Transfer Simulation of Turbulent Flow in a 90° Curved Square Pipe

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 94
Author(s):  
Guanming Guo ◽  
Masaya Kamigaki ◽  
Qiwei Zhang ◽  
Yuuya Inoue ◽  
Keiya Nishida ◽  
...  
Keyword(s):  
Heat Transfer ◽  
High Temperature ◽  
Turbulent Flow ◽  
Cross Section ◽  
Conjugate Heat Transfer ◽  
Air Flow ◽  
Temperature Fields ◽  
Spatial Average ◽  
Flow And Heat Transfer ◽  
Curved Pipes

This paper discusses the turbulent flow and heat transfer from a uniform air flow with high temperature to the outside through a 90° curved square pipe. Both conjugate heat transfer (CHT) simulation and experiments of temperature field measurements at cross sections of the pipe are performed. A straight pipe is investigated and compared with the 90° curved pipe. The temperature of the air flow at the inlet of the pipe is set at 402 K, and the corresponding Reynolds number is approximately 6 × 104. To obtain the spatial average temperature at each cross section, the temperature fields are measured along the streamwise of the pipes and in the circumferential direction using thermocouples at each cross section from the inlet to the outlet of both the straight and curved pipes. Furthermore, the simulation is performed for turbulent flow and heat transfer inside the pipe wall using the Re-normalization group (RNG) k-ε turbulence model and CHT method. Both the experimental and numerical results show that the curvature of the pipe result in a deviation and impingement in the high-temperature core and a separation between the wall and air, resulting in a secondary flow pattern of the temperature distribution.

Sign in / Sign up

Export Citation Format

Share Document