Experimental Study of Laminar Heat Transfer to In-Tube Flow of Non-Newtonian Fluids

1980 ◽  
Vol 102 (3) ◽  
pp. 397-401 ◽  
Author(s):  
S. D. Joshi ◽  
A. E. Bergles
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Circular Tube ◽  
Tube Flow ◽  
Temperature Dependent ◽  
Nusselt Numbers ◽  
Numerical Predictions ◽  
Uniform Wall ◽  
Uniform Wall Heat Flux ◽  
Newtonian Behavior

An experimental study is reported of heat transfer to laminar flow of two water-methocel pseudoplastic (power law) solutions in a circular tube subjected to a uniform wall heat flux. The object of this study was to evaluate the effects of non-Newtonian behavior and temperature-dependent consistency on heat transfer. The experimental Nusselt numbers are compared with numerical predictions and experimental data. Two correlations are recommended according to the temperature-dependence of the rheological characteristics.

Laminar Heat Transfer in Tubes Under Slip-Flow Conditions

1962 ◽  
Vol 84 (4) ◽  
pp. 363-369 ◽  
Author(s):  
E. M. Sparrow ◽  
S. H. Lin
Keyword(s):  
Heat Transfer ◽  
Wall Temperature ◽  
Slip Flow ◽  
Mean Free Path ◽  
Uniform Wall Temperature ◽  
Nusselt Numbers ◽  
Temperature Jumps ◽  
Uniform Wall ◽  
Moving Fluid ◽  
Uniform Wall Heat Flux

The effects of low-density phenomena on the fully developed heat-transfer characteristics for laminar flow in tubes has been studied analytically. Consideration is given to the slip-flow regime wherein the major rarefaction effects are manifested as velocity and temperature jumps at the tube wall. The analysis is carried out for both uniform wall temperature and uniform wall heat flux. In both cases, the slip-flow Nusselt numbers are lower than those for continuum flow and decrease with increasing mean free path. Extension of the results is made to include the effects of shear work at the wall, temperature jump modifications for a moving fluid, and thermal creep.

Heat Transfer to Water in Downward Flow in a Uniform Wall Temperature Vertical Tube at Low Graetz Numbers

1977 ◽  
Vol 99 (4) ◽  
pp. 586-589 ◽  
Author(s):  
T. E. Mullin ◽  
E. R. Gerhard
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Experimental Error ◽  
Vertical Tube ◽  
Tube Flow ◽  
Uniform Wall Temperature ◽  
Nusselt Numbers ◽  
A Value ◽  
Uniform Wall ◽  
Convection Parameter

This paper presents an experimental investigation of heat transfer to water in vertical tube flow. Results from both Heating in Upflow and Heating in Downflow with the Natural Convection Parameter (Gr Pr D/L)w held constant at a value of 5.5 × 105 are compared with the expression developed by Martinelli and Boelter. The Nusselt numbers for Heating in Downflow were slightly higher but, within experimental error, equivalent to those values obtained for Heating in Upflow. A description of the flowfield is presented for one set of conditions for Heating in Downflow.

Experimental and Numerical Study of Methanol-Water Mixture Single-Phase Heat Transfer in a Micro-Channel Heat Sink

2012 ◽  
Author(s):  
Chun K. Kwok ◽  
Matthew M. Asada ◽  
Jonathan R. Mita ◽  
Weilin Qu
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Sink ◽  
Single Phase ◽  
Numerical Study ◽  
Pure Water ◽  
Molar Fraction ◽  
Water Mixture ◽  
Micro Channel ◽  
Numerical Predictions

This paper presents an experimental study of single-phase heat transfer characteristics of binary methanol-water mixtures in a micro-channel heat sink containing an array of 22 microchannels with 240μm × 630μm cross-section. Pure water, pure methanol, and five methanol-water mixtures with methanol molar fraction of 16%, 36%, 50%, 63% and 82% were tested. Key parametric trends were identified and discussed. The experimental study was complemented by a three-dimensional numerical simulation. Numerical predictions and experimental data are in good agreement with a mean absolute error (MAE) of 0.87%.

Laminar Natural Convection in a Discretely Heated Cavity: II—Comparisons of Experimental and Theoretical Results

1995 ◽  
Vol 117 (4) ◽  
pp. 910-917 ◽  
Author(s):  
T. J. Heindel ◽  
F. P. Incropera ◽  
S. Ramadhyani
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Companion Paper ◽  
Nusselt Numbers ◽  
Numerical Predictions ◽  
Number Flow ◽  
Experimental Geometry

Three-dimensional numerical predictions and experimental data have been obtained for natural convection from a 3 × 3 array of discrete heat sources flush-mounted on one vertical wall of a rectangular cavity and cooled by the opposing wall. Predictions performed in a companion paper (Heindel et al., 1995a) revealed that three-dimensional edge effects are significant and that, with increasing Rayleigh number, flow and heat transfer become more uniform across each heater face. The three-dimensional predictions are in excellent agreement with the data of this study, whereas a two-dimensional model of the experimental geometry underpredicts average heat transfer by as much as 20 percent. Experimental row-averaged Nusselt numbers are well correlated with a Rayleigh number exponent of 0.25 for RaLz ≲ 1.2 × 108.

Influence of Short Helical Tape on Local Convective Heat Transfer and Thermal Performance Characteristics in Turbulent Decaying Swirl Flow

2010 ◽  
Vol 8 (1) ◽  
Author(s):  
Smith Eiamsa-ard ◽  
Vichan Kongkaitpaiboon ◽  
Khwanchit Wongcharee
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Thermal Performance ◽  
Swirl Flow ◽  
Transfer Rates ◽  
Friction Factors ◽  
Plain Tube ◽  
Uniform Wall ◽  
Uniform Wall Heat Flux

This paper reports the experimental investigation of local convective heat transfer enhancement, flow friction and thermal performance factor behaviors in the tube fitted with the short helical tapes (SHTs) acting as decaying swirl flow generators. The tapes with three different helical tape angles (? = 90°, 135° and 180°) and three different channel numbers (N = 2, 3 and 4 channels) were tested under the uniform wall heat flux condition. The performance of each tape is compared with the performance of the plain tube subject to the same pumping power. The experimental results show that the heat transfer rates and friction factors of the tube with SHTs are respectively in range of 1.15 to 1.9 and 1.49 to 2.31 times of those in the plain, corresponding to thermal performances between 0.98 and 1.46. The correlations for Nusselt number (Nu) as a function of Reynolds number (Re), Prandtl number (Pr), helical tape angle (?) and the number of channel (N) are also developed.

Numerical Study of Circular Tube inserted Arc Belt on Fluid Flow and Heat Transfer under Laminar Flow

2013 ◽  
Vol 561 ◽  
pp. 460-465
Author(s):  
Dong Hui Zhang ◽  
Jiao Gao
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Laminar Flow ◽  
Wall Temperature ◽  
Circular Tube ◽  
Numerical Study ◽  
Resistance Coefficient ◽  
Uniform Wall Temperature ◽  
Flow And Heat Transfer ◽  
Uniform Wall

The objective of this paper is to study the characteristic of a circular tube with a built-in arc belt on fluid flow and heat transfer in uniform wall temperature flows. Numerical simulations for hydrodynamically laminar flow was direct ran at Re between 600 and 1800. Preliminary results on velocity and temperature statistics for uniform wall temperature show that, arc belt can swirl the pipe fluid, so that the fluid at the center of the tube and the fluid of the boundary layer of the wall can mix fully, and plays the role of enhanced heat transfer, but also significantly increases the resistance of the fluid and makes the resistance coefficient of the enhanced tube greater than smooth tube. The combination property PEC is all above 1.5.

Sign in / Sign up

Export Citation Format

Share Document