Temperature Transformation for High-Temperature Heat Pumps

1988 ◽  
Vol 110 (4) ◽  
pp. 652-657 ◽  
Author(s):  
R. Radermacher ◽  
L. A. Howe
Keyword(s):  
High Temperature ◽  
Heat Pump ◽  
Heat Pumps ◽  
Pure Component ◽  
Effect Of Temperature ◽  
Working Fluid ◽  
Fluid Mixture ◽  
Temperature Transformation ◽  
Temperature Levels ◽  
Very High

A heat pump cycle is introduced that allows heat pumping between two very high temperature levels, while the suction temperature of the working fluid vapor passing through the compressor is considerably lower. This effect of “Temperature Transformation” is achieved by using a working fluid mixture instead of a single pure component and by employing an unconventional cycle design. The proposed cycle allows the extension of heat pump applications to high temperature levels without encountering operating problems for conventional compressors. This cycle and its features are explained. Its performance has been calculated and the results are presented and discussed.

scholarly journals Evaluation of the Environmental Sustainability of a Stirling Cycle-Based Heat Pump Using LCA

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4469
Author(s):  
Umara Khan ◽  
Ron Zevenhoven ◽  
Tor-Martin Tveit
Keyword(s):  
High Temperature ◽  
Heat Pump ◽  
Waste Heat ◽  
Heat Pumps ◽  
Heat Output ◽  
Environmental Footprint ◽  
Stirling Cycle ◽  
Impact Reduction ◽  
Temperature Heat ◽  
Very High

Heat pumps are increasingly seen as efficient and cost-effective heating systems also in industrial applications. They can drastically reduce the carbon footprint of heating by utilizing waste heat and renewable electricity. Recent research on Stirling cycle-based very high temperature heat pumps is motivated by their promising role in addressing global environmental and energy-related challenges. Evaluating the environmental footprint of a heat pump is not easy, and the impacts of Stirling cycle-based heat pumps, with a relatively high temperature lift have received little attention. In this work, the environmental footprint of a Stirling cycle-based very high temperature heat pump is evaluated using a “cradle to grave” LCA approach. The results for 15 years of use (including manufacturing phase, operation phase, and decommissioning) of a 500-kW heat output rate system are compared with those of natural gas- and oil-fired boilers. It is found that, for the Stirling cycle-based HP, the global warming potential after of 15 years of use is nearly −5000 kg CO2 equivalent. The Stirling cycle-based HP offers an environmental impact reduction of at least 10% up to over 40% in the categories climate change, photochemical ozone formation, and ozone depletion when compared to gas- and oil-fired boilers, respectively.

Development and Experimental Study of New Working Fluids for Moderate-High-Temperature Heat Pumps

2012 ◽  
Vol 468-471 ◽  
pp. 1313-1321
Author(s):  
Shi Jie Liu ◽  
Wen Sheng Yu ◽  
Wu Chen
Keyword(s):  
High Temperature ◽  
Heat Pump ◽  
Heat Pumps ◽  
Coefficient Of Performance ◽  
Working Fluid ◽  
Working Fluids ◽  
Heating Efficiency ◽  
Temperature Heat ◽  
Performance Results ◽  
High Temperature Heat Pump

Some suggestions for developing new working fluids for moderate-high-temperature heat pump with excellent thermal and environmental performance were given firstly in this paper. The theoretical and experimental performance analysis of new-developed working fluids M1-M6 was carried out. The theoretical performance results showed that M1-M6 had high heating efficiency and GWP (Global Warming Potential) of M2 was less than 150. The experimental results showed that M5 had higher thermal efficiency than other two working fluids under same working condition. At the ambient temperature respectively of 30 Centigrade Degree and 40 Centigrade Degree, it took 70 and 65 minutes by the heat pump charged with M5 as working fluid to heat 100 liters of water respectively from 30 Centigrade Degree to 80 Centigrade Degree. Meanwhile the system’s COP (Coefficient of Performance) was respectively 2.9 and 3.0.

scholarly journals Identification of Existing Challenges and Future Trends for the Utilization of Ammonia-Water Absorption–Compression Heat Pumps at High Temperature Operation

2021 ◽  
Vol 11 (10) ◽  
pp. 4635
Author(s):  
Marcel Ulrich Ahrens ◽  
Maximilian Loth ◽  
Ignat Tolstorebrov ◽  
Armin Hafner ◽  
Stephan Kabelac ◽  
...  
Keyword(s):  
High Temperature ◽  
Water Absorption ◽  
Industrial Sector ◽  
Heat Pumps ◽  
Working Fluid ◽  
Large Temperature ◽  
Future Trends ◽  
Ammonia Water ◽  
Starting Point ◽  
High Temperature Operation

Decarbonization of the industrial sector is one of the most important keys to reducing global warming. Energy demands and associated emissions in the industrial sector are continuously increasing. The utilization of high temperature heat pumps (HTHPs) operating with natural fluids presents an environmentally friendly solution with great potential to increase energy efficiency and reduce emissions in industrial processes. Ammonia-water absorption–compression heat pumps (ACHPs) combine the technologies of an absorption and vapor compression heat pump using a zeotropic mixture of ammonia and water as working fluid. The given characteristics, such as the ability to achieve high sink temperatures with comparably large temperature lifts and high coefficient of performance (COP) make the ACHP interesting for utilization in various industrial high temperature applications. This work reviews the state of technology and identifies existing challenges based on conducted experimental investigations. In this context, 23 references with capacities ranging from 1.4 kW to 4500 kW are evaluated, achieving sink outlet temperatures from 45 °C to 115 °C and COPs from 1.4 to 11.3. Existing challenges are identified for the compressor concerning discharge temperature and lubrication, for the absorber and desorber design for operation and liquid–vapor mixing and distribution and the choice of solution pump. Recent developments and promising solutions are then highlighted and presented in a comprehensive overview. Finally, future trends for further studies are discussed. The purpose of this study is to serve as a starting point for further research by connecting theoretical approaches, possible solutions and experimental results as a resource for further developments of ammonia-water ACHP systems at high temperature operation.

scholarly journals Calculated and experimental evaluation heat pump distiller on pentane as working substance

2020 ◽  
Vol 324 ◽  
pp. 02007
Author(s):  
Gennady A. Ilyn ◽  
Ilya I. Malafeev ◽  
Vladimir B. Sapojnikov
Keyword(s):  
High Temperature ◽  
High Efficiency ◽  
Recovery Phase ◽  
High Energy ◽  
Heat Pumps ◽  
Working Fluid ◽  
Vapor Compression ◽  
The Cost ◽  
Reliable Methods ◽  
High Temperature Vapor

One of the most common and reliable methods of water treatment is the method of thermal distillation. Despite the reliability of the method, its application is constrained by high energy intensity. The most effective way to reduce the cost of production of distillate is the use of thermal transformers, providing regenerate and heat recovery phase transformations of the distillate. The use of working fluid with the most favorable thermodynamic properties is of paramount importance for the creation of high efficiency thermotransformers. The work is considered working fluid for high-temperature heat pumps and the results of the calculation-experimental study of high-temperature vapor compression heat-pumping distiller on natural working substance n-pentan.

Review Status on High Temperature Heat Pumps

2012 ◽  
Vol 170-173 ◽  
pp. 2550-2553 ◽  
Author(s):  
Guang Hui Zhou ◽  
Shi Wei Feng ◽  
Si Qi Cui ◽  
Yin Liu
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Heat Pump ◽  
Heat Pumps ◽  
Industrial Processes ◽  
Paper Briefly ◽  
Development Status ◽  
Temperature Heat ◽  
Waste Energy ◽  
Higher Temperature

A heat pump is a kind of energy saving equipment. It can effectively improve the grade of low temperature renewable and waste energy. Because of the increasing demands for higher temperature energy in many industrial processes and other fields, the development and research of high temperature heat pumps have been becoming more and more pressing and significant. This paper briefly summarizes the development status in two aspects: the development of working fluids and system features and characteristics of different cycle types.

Surge Onset in Turbo Heat Pumps

2014 ◽  
Vol 136 (8) ◽  
Author(s):  
Jieun Song ◽  
Jung Chan Park ◽  
Kil Young Kim ◽  
Jinhee Jeong ◽  
Seung Jin Song
Keyword(s):  
Heat Pump ◽  
Heat Exchangers ◽  
Heat Pumps ◽  
Working Fluid ◽  
Pump System ◽  
Heat Pump System ◽  
Linearized Stability ◽  
Stability Model ◽  
Expansion Valve ◽  
Mass Spring

A typical turbo heat pump system consists of a centrifugal compressor, expansion valve, and two heat exchangers—a condenser and evaporator. Compared to a gas turbine, a turbo heat pump introduces additional complexities because it is a two-phase closed-loop system with heat exchange using a real gas/liquid (refrigerant) as the working fluid. For the first time, surge onset in such systems has been physically, analytically, and experimentally investigated. This study analytically investigates the physical mechanisms of surge onset in turbo heat pumps. From an existing nonlinear turbo heat pump surge model, the turbo heat pump is viewed as a mass-spring-damper system with two inertias, two dampers, and four springs which is then further simplified to a single degree-of-freedom system. Surge onset occurs when the system damping becomes zero and depends not only the compressor but also on the ducts, heat exchangers, and expansion valve. Alternatively, a new stability model has been developed by applying a linearized small perturbation method to the nonlinear turbo heat pump surge model. When the new linear stability model is applied to a conventional open loop compression system (e.g., a turbocharger), predictions identical to those of Greitzer's model are obtained. In addition, surge onset has been experimentally measured in two turbo heat pumps. A comparison of the predictions and measurements shows that the mass-spring-damper model and the linearized stability model can accurately predict the turbo heat pump surge onset and the mass-spring-damper model can explain the turbo heat pump surge onset mechanisms and parametric trends in turbo heat pumps.

scholarly journals PVT and ETC Coupling for Annual Heating and Cooling by Absorption Heat Pumps

2020 ◽  
Vol 12 (17) ◽  
pp. 7042
Author(s):  
Marco Noro ◽  
Renato Lazzarin
Keyword(s):  
Heat Pump ◽  
Cell Damage ◽  
Primary Energy ◽  
Heat Pumps ◽  
Solar Thermal ◽  
Solar Collectors ◽  
Absorption Chiller ◽  
Heating And Cooling ◽  
Cold Source ◽  
Temperature Levels

Until recently, solar assisted heat pumps have used solar collectors as a cold source. Solar collectors provide, when possible, direct heat, otherwise they offer temperature levels to the heat pump evaporator higher than the outside air. At the same time, solar thermal cooling exploits the solar collectors and the absorption chiller only in hot months. Photovoltaic/Thermal (PVT) modules have been available on the market in recent years for solar cogeneration, but their utilization can be problematic due to PhotoVoltaic (PV) cell damage in cases where there is no heating request. This paper considers the possibility of coupling evacuated tube collectors and photovoltaic/thermal modules to drive an absorption heat pump-based plant operating as an absorption chiller in the summertime. The cold source is the solar energy and the ground, which is recharged by the solar thermal and photovoltaic/thermal collectors and by the cooling of the absorber-condenser in mid-seasons and summer. This study analyzes the system behavior in yearly operation and evaluates the role of suitable storage tanks in two different climates, varying the size of the two solar fields and the generator tank. In the best plant configuration, a primary energy ratio of 26.6 in colder climates with cloudy skies and 20 in hotter climates with clearer skies is obtained.

Sign in / Sign up

Export Citation Format

Share Document