Strength Loss in Composite Cylinders Under Impact

1988 ◽  
Vol 110 (2) ◽  
pp. 180-184 ◽  
Author(s):  
A. P. Christoforou ◽  
S. R. Swanson
Keyword(s):  
Composite Structures ◽  
Composite Plates ◽  
Strength Loss ◽  
Pressure Vessels ◽  
Fourier Series Expansion ◽  
Lateral Impact ◽  
Low Velocity ◽  
Expansion Procedure ◽  
The Impact ◽  
Composite Cylinders

The problem of strength loss in composite structures due to impact appears to be important due to the sensitivity of advanced composites to these loadings. Although a number of studies have been carried out on impact of flat composite plates, relatively little work has been done on tubular geometries such as pressure vessels despite the usage in applications. We have addressed the problem of calculating strength loss due to low velocity, lateral impact of composite cylinders. In our model we use an existing Fourier Series expansion procedure to calculate ply stresses and strains, compare these values with allowables to predict fiber breakage during the impact, and finally use fracture mechanics to predict the strength loss due to the impact. Although the model is quite simplified, the general trends of experiments appear to be represented.

A strain amplitude-based algorithm for impact localization on composite laminates

2011 ◽  
Vol 22 (17) ◽  
pp. 2061-2067 ◽  
Author(s):  
Cristobal Hiche ◽  
Clyde K. Coelho ◽  
Aditi Chattopadhyay
Keyword(s):  
Strain Amplitude ◽  
Composite Laminates ◽  
Composite Structures ◽  
Composite Plates ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Sensor Orientation ◽  
Fbg Sensors ◽  
The Impact ◽  
Impact Localization

Automated detection of damage due to low energy impacts in composite structures is very important for aerospace structural health monitoring applications. Low-velocity impact creates subsurface damage that can significantly reduce the stiffness of a component, yet show barely visible damage. This article proposes a novel methodology for impact localization based on the maximum strain amplitude measured by fiber Bragg grating (FBG) sensors during an impact event. The approach correlates the strain amplitude of each sensor pair to find the location of highest strain corresponding to the impact location. This approach requires minimal knowledge of the structure and fewer number of sensors as opposed to current localization methods. Both simulation and experimental data are used as proof of concept. Since FBG sensors measure strain in only one direction, the effect of sensor orientation on the performance of the algorithm is also studied. The algorithm is tested on graphite/epoxy composite plates and shows good localization results in all impact cases considered.

RESIDUAL PLASTIC STRAIN STATE AND DELAMINATION PATTERN OF COMPOSITE LAMINATES WITH AUTOMATED INDUCED-GAP SUBJECTED TO HEMI-SPHERICAL IMPACT LOADING

2021 ◽  
Author(s):  
MOHAMMADHOSSEIN GHAYOUR ◽  
MEHDI HOJJATI ◽  
RAJAMOHAN GANESAN
Keyword(s):  
Plastic Strain ◽  
Impact Loading ◽  
Residual Strain ◽  
Composite Structures ◽  
Strain State ◽  
Composite Plates ◽  
Structural Level ◽  
Manufacturing Defects ◽  
Initiation And Propagation ◽  
The Impact

Automated manufacturing defects are types of composite structure defects that occur during fiber deposition by advanced robots. The induced gap is the most probable type of defect in the Automated Fiber Placement (AFP) technique. This defect can affect the mechanical performance of the composite structures at both material level by inducing the material inhomogeneity and the structural level by introducing the consolidation effect in the structure during the curing process. The current study investigates the effect of induced-gaps on the damage assessment of thin composite plates under Low-Velocity Impact (LVI) loading. The paper focuses on the delamination initiation and propagation and the residual plastic strain state of the impacted plates. The primary application of this study is to understand the interaction of induced gaps on the delamination pattern of composite samples subjected to LVI. For this purpose, a series of LVI tests are performed. Ultrasonic C-scan analysis and microscopic observation are implied to evaluate the internal damage due to impact loading. Finite Element (FE) analyses are then performed to evaluate the residual strain of the composite plates under Impact Energy (IE) loading less than 15 J. Then, the residual plastic strain in the impact zone is evaluated using a meso-macro method, and the effect of the local plasticity that occurs in the gap zones on the delamination initiation and propagation is studied. Results show that the stress relaxation due to the resin plasticity at the gap areas can affect the delamination pattern of the impacted composite plates. It is also shown that the residual strain of the impacted plates at the gap areas are new sources of the damages that need to be considered in the LVI analysis of the composite plates manufactured by the AFP technique.

Experimental Analysis for the Effect of Impactor Geometry on Carbon Reinforced Composite Materials

2017 ◽  
Vol 25 (9) ◽  
pp. 677-682 ◽  
Author(s):  
Faruk Elaldi ◽  
Busra Baykan ◽  
Can Akto
Keyword(s):  
Composite Materials ◽  
Carbon Fibre ◽  
Composite Plates ◽  
High Strength ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Area ◽  
Reinforced Composite ◽  
Contact Surfaces ◽  
The Impact

For the last three decades, composites have become very preferable materials to be used in the automotive industry, structural parts of aircraft and military systems and spacecraft, due to their high strength and modulus. Composite materials are sometimes exposed to invisible or visible damage due to impact loading during their service life. In this study, the effect of impactor geometry with four different contact surfaces on woven carbon fibre-reinforced composite plates having three different thicknesses are investigated. In the first stage, composite plates were manufactured with the ply orientations of [45/-45/0/90/45/-45]2s, [45/-45/0/90/45/-45]3s, [45/-45/0/90/45/-45]4s based on conventional usage. In the second stage, carbon fibre-reinforced composite test panels were exposed to low velocity impact tests to obtain force-time, energy-time and force-displacement curves. Finally, semi and full penetration of composite panels and damage magnitude were determined. It was found that the impactor geometries with lower contact surfaces such as conical and ogive types were much more penetrative on composite plates than the other geometries, but they caused larger damage area in the vicinity of the impact point.

Low Velocity Impact on Woven Kenaf Fiber Reinforced Composites

2014 ◽  
Vol 629 ◽  
pp. 503-506 ◽  
Author(s):  
Al Emran Ismail ◽  
M.A. Hassan
Keyword(s):  
Impact Velocity ◽  
Composite Plates ◽  
Fiber Reinforced Composites ◽  
Low Velocity Impact ◽  
Reinforced Composites ◽  
Low Velocity ◽  
Kenaf Fiber ◽  
Velocity Impact ◽  
The Impact ◽  
Woven Kenaf

This paper presents the experimental investigations on the low velocity impact response of woven kenaf fiber reinforced composites. Kenaf yarns are weaved with an orientation of 00 of warp and 900 of weft to form woven kenaf mat. Three woven kenaf mats are stacked together to achieve the specified sequences. The woven stacked kenaf mats are hardened with polymeric resin and compressed to squeeze off any excessive resin and to minimize voids content. The hardened composite plates are perforated using different impact velocities. Impact responses of the composite plates are examined according to stacking sequences, impact velocities and fragmentation patterns. According to the present results, the impact strength is strongly related with the impact velocity. If higher impact velocity is used, the performances of load bearing are reduced. It is obvious that no significant features of composite fragmentations occurred from the perforated holes. However, relatively larger area of mechanical damages is found distributed around the holes, indicating the capability of composites to absorb energy effectively.

An Enhanced Time-Reversal Method for Impact Damage Monitoring on Plate-Like Structures

2012 ◽  
Vol 525-526 ◽  
pp. 365-368
Author(s):  
Chun Lin Chen ◽  
Yu Long Li ◽  
Fuh Gwo Yuan
Keyword(s):  
Time Reversal ◽  
Composite Structures ◽  
Impact Damage ◽  
High Energy ◽  
Low Velocity ◽  
Energy Impact ◽  
Location Detection ◽  
Focusing Property ◽  
The Impact ◽  
Impact Events

Based on the self-focusing property of time-reversal (T-R) concept, a time focusing parameter was suggested to improve the impact source identification method developed in authors previous work. This paper presents a further study on monitoring relatively high energy impact events which caused induced damage on structures. Numerical verifications for a finite isotropic plate and a composite plate under low velocity impacts are performed to demonstrate the versatility of T-R method for impact location detection with induced plastic deformation and delamination damage on metallic and composite structures respectively. The focusing property of T-R concept was adequately utilized to detect impact/damage location. The results show that impact events with various features can be localized using T-R method by introducing the time focusing parameter. It is suited to monitor serious impact events on plate like structures in practice in future.

scholarly journals Characterisation of Impact Damage of Composite Structures Using Wavelet-Based Fusion of Ultrasonic and Optical Images

2014 ◽  
Vol 23 (5) ◽  
pp. 096369351402300
Author(s):  
Andrzej Katunin ◽  
Pawel Kostka
Keyword(s):  
Composite Structures ◽  
Damage Identification ◽  
Impact Damage ◽  
Human Perception ◽  
Laminated Plates ◽  
Low Velocity ◽  
Fusion Algorithm ◽  
Fibre Failure ◽  
Optical Images ◽  
The Impact

This paper presents the novel approach for the impact damage characterisation of composite structures, which is based on fusion of ultrasonic scans and optical images. Both internal (inter-fibre failure, fibre failure, delaminations) and external (scratches and surface cracks) damages occurred in the composite structures during their operation need to be analysed due to their occurrence on both of these levels, especially in the case of impact damages. The presented approach allows for the improvement of the characterisation quality, i.e. the whole damaged area could be detected and localized. In order to assure the proper damage identification the wavelet-based fusion with application of appropriate wavelets and parameters of a fusion algorithm was used, which allows for distinction of different types of damages and overall improvement of the resulted image with respect to the human perception capability. The approach was validated experimentally on the glass-epoxy laminated plates after the low-velocity impacts. Representative cases of damaged structure were presented and analysed.

Simulation of Low Velocity Impact Test on Carbon/Epoxy Composite Plates

2015 ◽  
Vol 1115 ◽  
pp. 523-526
Author(s):  
Ziamah B. Buang ◽  
S.M. Kashif
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
Composite Plates ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Element Analysis ◽  
Velocity Impact

Composite materials that have low weight and high strength properties are currently one of the promising materials for a vehicle’s body. However, the effect of low velocity impact on composite may cause failure through matrix cracking, fibre breakage and delamination which may reduce the structure strength. Low velocity impact can be analysed either by experimentation or numerical simulation. Numerical simulation which is also known as finite element analysis can show the degradation of the composite structure properties after an impact loading condition without doing any experimentation. Thus, in this paper, LS-DYNA is the finite element analysis software that is used to simulate a low velocity impact on composite structures.

Low-velocity impact on cylindrically curved bilayers

2018 ◽  
Vol 232 (4) ◽  
pp. 568-576
Author(s):  
A Bidi ◽  
Gh Liaghat ◽  
Gh Rahimi
Keyword(s):  
Shear Deformation Theory ◽  
Low Velocity Impact ◽  
Fourier Series Expansion ◽  
Balance Model ◽  
Radius Of Curvature ◽  
Hertz Contact ◽  
Low Velocity ◽  
Mass Model ◽  
Velocity Impact ◽  
The Impact

In this study, low-velocity impact response of cylindrically curved bilayer panels is studied. A large number of parameters affect the impact dynamics and many models have been used for solution previously. These models can be classified as energy balance model, spring–mass model, and complete models in which the dynamic behavior of the structure is exactly modeled. In this study, a two degrees of freedom spring–mass model is used to evaluate contact force between the composite panel and impactor. This work uses the modified Hertz contact model which is linearized form of general Hertz contact law. First-order shear deformation theory coupled with Fourier series expansion is used to derive the governing equations of the curved bilayer panel. The effects of panel curvature, impact velocity, and mass of impactor on the panel behavior under low-velocity impact are investigated. The results show that changing the panel radius of curvature will change the impact force, impact duration, and local panel deformation. Finally, analytical solutions have been compared with numerical results.

scholarly journals Enhanced Impact-Resistance of Aeronautical Quasi-Isotropic Composite Plates Through Diffused Water Molecules in Epoxy

2020 ◽  
Author(s):  
Furqan Ahmad ◽  
Fethi Abbassi ◽  
Mazhar Ul-Islam ◽  
Frédéric JACQUEMIN ◽  
Jung-Wuk Hong
Keyword(s):  
Carbon Fiber ◽  
Impact Resistance ◽  
Composite Plates ◽  
Hot Water ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Segmental Mobility ◽  
Impact Tests ◽  
Isotropic Composite ◽  
The Impact

Abstract In order to elucidate the hygroscopic effects on impact-resistance of carbon fiber/epoxy quasi-isotropic composite plates, low-velocity impact tests are conducted on dry and hygroscopically conditioned plates, respectively, under identical configurations. For the impact tests, plates were immersed in the hot water at 80 °C to absorb a different amount of moisture content (MC). Experimental results reveal that the presence of the MC plays a pivotal role by improving the impact-resistance of composite plates. Plates with higher percentage of MC could behave elastically to a larger strain, yielding larger deflection under impact loading. From SEM fractographies, it is observed that small disbanding grows at the interface of epoxy and carbon fiber due to absorbed MC. After absorbing MC, most of impact enegy is dissipated in hygroscopic conditioned composite plates throught elastic deformation and overall less damage is induced in wet composite plates compare to the dry plate. We can postulate that the presence of MC increases the elastic limit as well as ductility of the epoxy by promoting chain segmental mobility of the polymer molecules, which eventually leads to the enhancement of the impact-resistance of wet quasi-isotropic composite plates in comparison with the dry plate.

scholarly journals Modeling Analysis of Guided Ultrasonic Waves in Composite Plates with Impact Damage

2018 ◽  
Vol 7 (4.26) ◽  
pp. 175
Author(s):  
Noorfaten Asyikin Ibrahim ◽  
Bibi Intan Suraya Murat
Keyword(s):  
Composite Structures ◽  
Impact Damage ◽  
Composite Plates ◽  
Guided Wave ◽  
Ultrasonic Waves ◽  
Fe Model ◽  
Element Analysis ◽  
Damage Area ◽  
Guided Ultrasonic Waves ◽  
The Impact

This paper investigates the propagation of guided ultrasonic waves and the interaction with impact damage in composite plates using a full three-dimensional Finite Element analysis. Impact damage in the composite plate was modeled as rectangular- and T-shaped delaminations. In order to provide guidelines for extending the modeling of realistic multimode impact damage, the impact damage was modeled as a combination of the delamination and reduced materials properties. The information obtained from these methods was compared to the experimental results around the damage area for a validation. There was a reasonable similarity between the experimental and FE results. The FE simulations can effectively model the scattering characteristics of the A0 mode wave propagation in anisotropic composite plates. This suggests that the simplified and easy-to-implement FE model could be used to represent the complex impact damage in composite plates. This could be useful for the improvement of the FE modeling and performance of guided wave methods for the in-situ NDE of large composite structures. 

Sign in / Sign up

Export Citation Format

Share Document