Flow Stress Equations for Type 304 Stainless and AISI 1055 Steels

1985 ◽  
Vol 107 (2) ◽  
pp. 97-100 ◽  
Author(s):  
P. Dadras
Keyword(s):  
Experimental Data ◽  
Stainless Steel ◽  
Flow Stress ◽  
Strain Rate ◽  
Working Conditions ◽  
Hot Working ◽  
304 Stainless Steel ◽  
Strain Behavior ◽  
Type 304 ◽  
Type 304 Stainless Steel

A model for stress-strain behavior under hot working conditions has been proposed. Based on experimental data, equations for the dependence of flow stress on strain, strain rate, and temperature have been developed. Application to type 304 stainless steel and AISI 1055 steel has been demonstrated.

Modeling of Size Effects on the Flow Stress of Type 304 Stainless Steel and Application in Coining Process

2007 ◽  
Author(s):  
Gap-Yong Kim ◽  
Muammer Koc ◽  
Jun Ni
Keyword(s):  
Grain Size ◽  
Stainless Steel ◽  
Flow Stress ◽  
Size Effect ◽  
Size Effects ◽  
Specimen Size ◽  
304 Stainless Steel ◽  
Length Scales ◽  
Type 304 ◽  
Type 304 Stainless Steel

Application of microforming in various research areas has received much attention due to the increased demand for miniature metallic parts that require mass production. For the accurate analysis and design of microforming process, proper modeling of material behavior at the micro/meso-scale is necessary by considering the size effects. Two size effects are known to exist in metallic materials. One is the “grain size” effect, and the other is the “feature/specimen size” effect. This study investigated the “feature/specimen size” effect and introduced a scaling model which combined both feature/specimen and grain size effects. Predicted size effects were compared with experiments obtained from previous research and showed a very good agreement. The model was also applied to forming of micro-features by coining. A flow stress model for Type 304 stainless steel taking into consideration the effect of the grain and feature size was developed and implemented into a finite element simulation tool for an accurate numerical analysis. The scaling model offered a simple way to model the size effect down to length scales of a couple of grains and extended the use of continuum plasticity theories to micro/meso-length scales.

Evaluation of Creep Constitutive Equations for Type 304 Stainless Steel Under Repeated Multiaxial Loading

1982 ◽  
Vol 104 (3) ◽  
pp. 159-164 ◽  
Author(s):  
Y. Ohashi ◽  
N. Ohno ◽  
M. Kawai
Keyword(s):  
Stainless Steel ◽  
Strain Rate ◽  
Strain Hardening ◽  
Deviatoric Stress ◽  
304 Stainless Steel ◽  
Multiaxial Loading ◽  
Mixed Hardening ◽  
Principal Axes ◽  
Type 304 ◽  
Type 304 Stainless Steel

Four kinds of creep constitutive models, i.e., strain-hardening, modified strain-hardening, kinematic-hardening, and mixed-hardening theory, are evaluated on the basis of creep-test results on type 304 stainless steel at 650°C under repeated multiaxial loading. The predictions of the four models are compared with the experimental results. It is shown that substantial differences appear among these predictions under large rotations of the principal axes of the deviatoric stress tensor, and that none of them can describe with sufficient accuracy the transient increase of strain-rate and the noncollinearity between the deviatoric stress and creep strain-rate vectors which are observed just after the stress-rotations.

High Strain Rate Tensile Properties of AISI Type 304 Stainless Steel

1973 ◽  
Vol 95 (3) ◽  
pp. 182-185 ◽  
Author(s):  
J. M. Steichen
Keyword(s):  
Stainless Steel ◽  
High Strain Rate ◽  
Strain Rate ◽  
Tensile Properties ◽  
High Strain ◽  
304 Stainless Steel ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel ◽  
Strength And Ductility

The high strain rate tensile properties of solution annealed Type 304 stainless steel have been determined experimentally. Tests were performed at strain rates ranging from 3 × 10−5 to 1 × 102 in./in./sec at temperatures from 600 to 1600 deg F. At temperatures to 1000 deg F, the strength and ductility are largely insensitive to variations in strain rate, whereas at temperatures from 1200 to 1600 deg F, significant increases in both strength and ductility are observed with increasing strain rate.

Effects of Cyclic Tensile Loading on Stress Corrosion Cracking Susceptibility for Sensitized Type 304 Stainless Steel in 290 C High Purity Water

CORROSION ◽  
1979 ◽  
Vol 35 (11) ◽  
pp. 523-531 ◽  
Author(s):  
HIROSHI TAKAKU ◽  
MORIYASU TOKIWAI ◽  
HIDEO HIRANO
Keyword(s):  
Stainless Steel ◽  
Strain Rate ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
High Purity ◽  
Corrosion Cracking ◽  
304 Stainless Steel ◽  
Intergranular Stress Corrosion ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract The effects of load waveform on intergranular stress corrosion cracking (IGSCC) susceptibility have been examined for sensitized Type 304 stainless steels in a 290 C high purity water loop. Concerning the strain rate in the trapezoidal stress waveform, it was found that IGSCC susceptibility was higher for smaller values of the strain rate. It was also shown that IGSCC susceptibility became higher when the holding time at the upper stress was prolonged, and when the upper stress was high. The occurrence of IGSCC for sensitized Type 304 stainless steel became easy due to the application of cyclic tensile stress in 290 C high purity water.

Sign in / Sign up

Export Citation Format

Share Document