Thermoelastic Fracture Mechanics for Nonhomogeneous Material Subjected to Unsteady Thermal Load

1999 ◽  
Vol 67 (1) ◽  
pp. 87-95 ◽  
Author(s):  
B. L. Wang ◽  
J. C. Han ◽  
S. Y. Du
Keyword(s):  
Functionally Graded Materials ◽  
Material Properties ◽  
Crack Problem ◽  
Laminated Composite ◽  
Functionally Graded ◽  
Comprehensive Treatment ◽  
Numerical Illustration ◽  
Graded Materials ◽  
Nonhomogeneous Material ◽  
Crack Problems

This article provides a comprehensive treatment of cracks in nonhomogeneous structural materials such as functionally graded materials. It is assumed that the material properties depend only on the coordinate perpendicular to the crack surfaces and vary continuously along the crack faces. By using a laminated composite plate model to simulate the material nonhomogeneity, we present an algorithm for solving the system based on the Laplace transform and Fourier transform techniques. Unlike earlier studies that considered certain assumed property distributions and a single crack problem, the current investigation studies multiple crack problems in the functionally graded materials with arbitrarily varying material properties. The algorithm can be applied to steady state or transient thermoelastic fracture problem with the inertial terms taken into account. As a numerical illustration, transient thermal stress intensity factors for a metal-ceramic joint specimen with a functionally graded interlayer subjected to sudden heating on its boundary are presented. The results obtained demonstrate that the present model is an efficient tool in the fracture analysis of nonhomogeneous material with properties varying in the thickness direction. [S0021-8936(00)01601-9]

scholarly journals A fracture mechanics model for a crack problem of functionally graded materials with stochastic mechanical properties

2012 ◽  
Vol 468 (2146) ◽  
pp. 2939-2961 ◽  
Author(s):  
Licheng Guo ◽  
Zhihai Wang ◽  
Naotake Noda
Keyword(s):  
Mechanical Properties ◽  
Fracture Mechanics ◽  
Functionally Graded Materials ◽  
Small Sample ◽  
Functionally Graded ◽  
Phase Volume ◽  
Graded Materials ◽  
Volume Fractions ◽  
Mechanics Model ◽  
Crack Problems

This study aimed to develop a method to build a ‘bridge’ between the macro fracture mechanics model and stochastic micromechanics-based properties so that the macro fracture mechanics model can be expanded to the fracture mechanics problem of functionally graded materials (FGMs) with stochastic mechanical properties. An analytical fracture mechanics model is developed to predict the stress intensity factors (SIFs) in FGMs with stochastic uncertainties in phase volume fractions. Considering the stochastic description of the phase volume fractions, a micromechanics-based method is developed to derive the explicit probabilistic characteristics of the effective properties of the FGMs so that the stochastic mechanical properties can be combined with the macro fracture mechanics model. A thought for choosing the samples efficiently is proposed so that the stable probabilistic characteristic of SIFs can be obtained with a very small sample size. The probability density function of SIFs can be determined by developing a histogram from the generated samples. The present method may provide a thought to establish an analytical model for the crack problems of FGMs with stochastic properties.

Designing Optimal Volume Fractions For Functionally Graded Materials With Temperature-Dependent Material Properties

2006 ◽  
Vol 74 (5) ◽  
pp. 861-874 ◽  
Author(s):  
Florin Bobaru
Keyword(s):  
Functionally Graded Materials ◽  
Material Properties ◽  
Volume Fraction ◽  
Effective Properties ◽  
Functionally Graded ◽  
Dominant Factor ◽  
Temperature Dependent ◽  
Graded Materials ◽  
Critical Stresses ◽  
Non Linear

We present a numerical approach for material optimization of metal-ceramic functionally graded materials (FGMs) with temperature-dependent material properties. We solve the non-linear heterogeneous thermoelasticity equations in 2D under plane strain conditions and consider examples in which the material composition varies along the radial direction of a hollow cylinder under thermomechanical loading. A space of shape-preserving splines is used to search for the optimal volume fraction function which minimizes stresses or minimizes mass under stress constraints. The control points (design variables) that define the volume fraction spline function are independent of the grid used in the numerical solution of the thermoelastic problem. We introduce new temperature-dependent objective functions and constraints. The rule of mixture and the modified Mori-Tanaka with the fuzzy inference scheme are used to compute effective properties for the material mixtures. The different micromechanics models lead to optimal solutions that are similar qualitatively. To compute the temperature-dependent critical stresses for the mixture, we use, for lack of experimental data, the rule-of-mixture. When a scalar stress measure is minimized, we obtain optimal volume fraction functions that feature multiple graded regions alternating with non-graded layers, or even non-monotonic profiles. The dominant factor for the existence of such local minimizers is the non-linear dependence of the critical stresses of the ceramic component on temperature. These results show that, in certain cases, using power-law type functions to represent the material gradation in FGMs is too restrictive.

SINGULAR INTEGRAL EQUATION METHOD FOR A MOVING CRACK PROBLEM IN ANTIPLANE ELASTICITY OF FUNCTIONALLY GRADED MATERIALS

2007 ◽  
Vol 04 (03) ◽  
pp. 475-492 ◽  
Author(s):  
Y. Z. CHEN ◽  
X. Y. LIN
Keyword(s):  
Integral Equation ◽  
Singular Integral Equation ◽  
Functionally Graded Materials ◽  
Material Property ◽  
Singular Integral ◽  
Crack Problem ◽  
Functionally Graded ◽  
Moving Crack ◽  
Graded Materials ◽  
Antiplane Elasticity

In this paper, elastic analysis for a Yoffe moving crack problem in antiplane elasticity of the functionally graded materials (FGMs) is presented. The crack is assumed to move with a constant velocity V. The traction applied on the crack face is arbitrary. The Fourier transform method is used to derive an elementary solution. Furthermore, using the obtained elementary solution a singular integral equation for the problem is obtained. After the singular integral equation is solved, the stress intensity factor (SIF) can be evaluated immediately. In the case of evaluating the SIFs at the leading crack tip and the trailing crack tip, the difference between the two cases is investigated. From the numerical solution of the SIFs, the influence caused by the velocity V and the FGM material property β1 are addressed. It is found that when the FGM material property β1 = 0, i.e. the homogeneous case, the SIFs at the crack tips do not depend on the moving velocity of the crack. Finally, numerical examples are given.

Numerical Investigation on the Fracture Behaviors of Three-Dimensional Functionally Graded Materials

2007 ◽  
Vol 353-358 ◽  
pp. 1098-1101 ◽  
Author(s):  
Hong Jun Yu ◽  
Li Cheng Guo ◽  
Lin Zhi Wu
Keyword(s):  
Functionally Graded Materials ◽  
Crack Front ◽  
Material Properties ◽  
High Efficiency ◽  
Three Dimensional ◽  
Functionally Graded ◽  
Parameter Analysis ◽  
Graded Materials ◽  
Gaussian Integration ◽  
Fracture Behaviors

Functionally graded materials (FGMs) with continuous varying properties have absorbed great attention for the purpose of eliminating the mismatch of material properties which may result in cracking. In this paper, three-dimensional finite element method (3D FEM) based on nonhomogeneous elements is used to study the fracture behaviors of a 3D FGM plate. Since real material properties at Gaussian integration points are adopted during forming the element stiffness matrix, the nonhomogeneous material properties can be applied in each element. Moreover, 20-node singular elements are used around the crack front to deal with the singularity of stress fields at the crack front. By this way, the stress intensity factors (SIFs) can be calculated with high efficiency and accuracy. Therefore, compared with the general FEM using homogeneouos elements, the calculating efficiency and accuracy can be increased. Finally, parameter analysis is conducted. It is found that the material nonhomogeneity constant and the crack parameter have significant influences on the SIFs.

Sign in / Sign up

Export Citation Format

Share Document