Theoretical and Experimental Study on Dynamic Coefficients and Stability for a Hydrostatic/Hydrodynamic Conical Bearing

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Guo Hong ◽  
Lai Xinmin ◽  
Cen Shaoqi
Keyword(s):  
Dynamic Performance ◽  
Flow Equation ◽  
Operating Conditions ◽  
Fluid Film ◽  
Radial Clearance ◽  
Stability Parameters ◽  
Damping Coefficients ◽  
Conical Bearing ◽  
The Stability ◽  
Stiffness And Damping

This paper presents a theoretical study and experimental method to recognize the dynamic performance (stiffness and damping coefficients) of an externally pressurized deep/shallow pockets hybrid conical bearing compensated by flat capillary restrictors. The equations governing the flow of fluid film in the conical bearing together with the pressure boundary condition and the restrictor flow equation are solved by using the finite element method. A delicate test rig is constructed and bearings having a big end diameter of 97 mm, a length of 90 mm, and a radial clearance of 0.02–0.025 mm are analyzed. It is assumed that the fluid film force of the hydrostatic/hydrodynamic conical bearing is characterized by a set of linear stiffness and damping coefficients. The experiment used the impulse excitation method to recognize these coefficients and established their characteristics under different operating conditions. Numerical results are compared with the experimental results. The stability parameters of hybrid conical, hydrodynamic, and hydrostatic bearings are compared. The results show that the hybrid conical bearing has the advantages of high load carrying capability and high stability under small eccentricity.

Influence of Wear on the Performance of Multirecess Hydrostatic Journal Bearing Operating With Micropolar Lubricant

2010 ◽  
Vol 132 (2) ◽  
Author(s):  
E. Rajasekhar Nicodemus ◽  
Satish C. Sharma
Keyword(s):  
Journal Bearing ◽  
Dynamic Performance ◽  
Flow Equation ◽  
Performance Characteristics ◽  
Wear Depth ◽  
Damping Coefficients ◽  
Load Line ◽  
Wide Range ◽  
Load Arrangement ◽  
Stiffness And Damping

The objective of the present work is to study theoretically the influence of wear on the performance of four-pocket capillary-compensated hydrostatic journal bearing operating with micropolar lubricant. In the present study, the lubricant containing additives and contaminants is modeled as micropolar fluid. The modified Reynolds equation for micropolar lubricant is solved using finite element method along with capillary restrictor flow equation as a constraint together with appropriate boundary conditions. The performance characteristics of a capillary-compensated four-pocket worn hydrostatic journal bearing operating with micropolar lubricant have been presented for a wide range of values of nondimensional external load, wear depth parameter, and micropolar parameters. The simulated results have also been presented for two different loading arrangements. In arrangement I, the load line acts through centers of the pockets, whereas in arrangement II, the load line bisects the land between two pockets. The simulated results suggest that a bearing lubricated with lubricant having higher micropolar effect has better static and dynamic performance characteristics as compared with Newtonian lubricant but the bearing lubricated with lubricant having higher micropolar effect is predominantly affected by the wear vis a vis static characteristics parameters as compared with Newtonian lubricant for both loading arrangements. However, in the case of stiffness and damping coefficients, loading arrangement II shows a significant higher enhancement in the value of direct stiffness and damping coefficients in z-direction due to micropolar effect as compared with load arrangement I. And also, the effect of wear on stiffness and damping coefficients in z-direction for bearing operating with micropolar lubricant is of same order as Newtonian lubricant for the loading arrangement II. A similar behavior is observed for the case of stiffness and damping coefficients in x-direction for loading arrangement I.

Stability of Multirecess Hybrid-Operating Oil Journal Bearings

1985 ◽  
Vol 107 (1) ◽  
pp. 116-121 ◽  
Author(s):  
Y. S. Chen ◽  
H. Y. Wu ◽  
P. L. Xie
Keyword(s):  
Finite Difference Method ◽  
Dynamic Performance ◽  
Journal Bearings ◽  
Design Parameters ◽  
Stability Threshold ◽  
Damping Coefficients ◽  
Hybrid Bearing ◽  
The Stability ◽  
Stiffness And Damping ◽  
Bearing System

An analysis and a numerical solution using finite difference method to predict the dynamic performance of multirecess hybrid-operating oil journal bearings are presented. The linearized stiffness and damping coefficients of a typical capillary-compensated bearing with four recesses are computed for various design parameters. The corresponding stiffness and the stability threshold of the bearing are then obtained, and the opposite influences of the hydrodynamic action on them are demonstrated. The effect of rotor flexibility on the onset of self-excited whirl is discussed, and a method is given to determine the stability threshold of a rotor-hybrid bearing system.

Leakage and Rotordynamic Coefficients of Brush Seals With Zero Cold Clearance Used in an Arrangement With Labyrinth Fins

2013 ◽  
Author(s):  
Manuel Gaszner ◽  
Alexander O. Pugachev ◽  
Christos Georgakis ◽  
Paul Cooper
Keyword(s):  
Dynamic Test ◽  
Operating Conditions ◽  
Radial Clearance ◽  
Labyrinth Seals ◽  
Rotordynamic Coefficients ◽  
Damping Coefficients ◽  
Stiffness Coefficients ◽  
Brush Seal ◽  
Brush Seals ◽  
Stiffness And Damping

A brush-labyrinth sealing configuration consisting of two labyrinth fins upstream and one brush seal downstream is studied experimentally and theoretically. Two slightly different brush seal designs with zero cold radial clearance are considered. The sealing configurations are tested on the no-whirl and dynamic test rigs to obtain leakage performance and rotordynamic stiffness and damping coefficients. The no-whirl tests allow identification of the local rotordynamic direct and cross-coupled stiffness coefficients for a wide range of operating conditions, while the dynamic test rig is used to obtain both global stiffness and damping coefficients, but for a narrower operating range limited by the capabilities of a magnetic actuator. Modeling of the brush-labyrinth seals is performed using computational fluid dynamics. The experimental global rotordynamic coefficients consist of an aerodynamic component due to the gas flow and a mechanical component due to the contact between the bristle tips and rotor surface. The CFD-based calculations of rotordynamic coefficients provide however only the aerodynamic component. A simple mechanical model is used to estimate the theoretical value of the mechanical stiffness of the bristle pack during the contact. The results obtained for the sealing configurations with zero cold radial clearance brush seals are compared with available data on three-tooth-on-stator labyrinth seals and a brush seal with positive cold radial clearance. Results show that the sealing arrangement with a line-on-line welded brush seal has the best performance overall with the lowest leakage and cross-coupled stiffness. The predictions are generally in agreement with the measurements for leakage and stiffness coefficients. The seal damping capability is noticeably underpredicted.

Sinusoidal Three-Lobe Bearings—Optimization and Stability Charts

1980 ◽  
Vol 102 (4) ◽  
pp. 416-424 ◽  
Author(s):  
W. E. ten Napel ◽  
R. Bosma
Keyword(s):  
Film Thickness ◽  
Stability Parameters ◽  
Stability Regions ◽  
Damping Coefficients ◽  
Optimum Position ◽  
Minimum Film Thickness ◽  
Stiffness And Damping

In contradistinction to the commonly used segmented three-lobe bearing, another type of bearing, i.e., the sinusoidal three-lobe bearing has been investigated in this paper. The main advantage of this bearing is that it can very easily be manufactured. Special attention has been paid to problems of optimization with regard to minimum film thickness and friction, respectively. Stiffness and damping coefficients have been calculated as well as stability regions and stability parameters. Additionally, the optimum position of the oil grooves has been investigated.

The Surface Roughness Effect on the Dynamic Stiffness and Damping Characteristics of the Hydrostatic Thrust Spherical Bearings: Part 5 of 5 — Clearance Type of Bearings

2007 ◽  
Author(s):  
Ahmad W. Yacout
Keyword(s):  
Surface Roughness ◽  
Capillary Tube ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Major Effect ◽  
Design Parameters ◽  
Compressibility Effect ◽  
Damping Coefficients ◽  
Stiffness And Damping ◽  
Fluid Compressibility

This study has theoretically analyzed the surface roughness, centripetal inertia and recess volume fluid compressibility effects on the dynamic behavior of a restrictor compensated hydrostatic thrust spherical clearance type of bearing. The stochastic Reynolds equation, with centripetal inertia effect, and the recess flow continuity equation with recess volume fluid compressibility effect have been derived to take into account the presence of roughness on the bearing surfaces. On the basis of a small perturbations method, the dynamic stiffness and damping coefficients have been evaluated. In addition to the usual bearing design parameters the results for the dynamic stiffness and damping coefficients have been calculated for various frequencies of vibrations or squeeze parameter (frequency parameter) and recess volume fluid compressibility parameter. The study shows that both of the surface roughness and the centripetal inertia have slight effects on the stiffness coefficient and remarkable effects on the damping coefficient while the recess volume fluid compressibility parameter has the major effect on the bearing dynamic characteristics. The cross dynamic stiffness showed the bearing self-aligning property and the ability to oppose whirl movements. The orifice restrictor showed better dynamic performance than that of the capillary tube.

Numerical study on the dynamic characteristics of water-lubricated rubber bearing under asperity contact

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Guo Xiang ◽  
Yijia Wang ◽  
Cheng Wang ◽  
Zhongliang Lv
Keyword(s):  
Elastic Modulus ◽  
Contact Stiffness ◽  
Water Film ◽  
Radial Clearance ◽  
Asperity Contact ◽  
Stiffness Coefficient ◽  
Content Type ◽  
Damping Coefficients ◽  
Rubber Bearing ◽  
Stiffness And Damping

Purpose In this study, the dynamic characteristics of the water-lubricated rubber bearing considering asperity contact are numerically studied, including water-film stiffness and damping coefficients and plastic-elastic contact stiffness coefficient. Design/methodology/approach The Kogut-Etsion elastic-plastic contact model is applied to calculate the contact stiffness coefficient at the bearing-bush interface and the perturbed method is used to calculate the stiffness and damping coefficients of water-film. In addition, the rubber deformation is determined by the finite element method (FEM) during the simulation. Parametric studies are conducted to assess the effects of the radial clearance, rubber thickness and elastic modulus on the dynamic characteristic of water-lubricated rubber bearing. Findings Numerical results indicate that stiffness and damping coefficients of water film and the contact stiffness of asperity are increased with the decreasing of the radial clearance and the dynamic coefficients are less sensitive to the rubber thickness compared with the elastic modulus of rubber. Furthermore, due to the existed groove, a sudden change of the water film direct stiffness and damping coefficients is observed when the eccentricity ratio ranges from 0.6 to 1.0. Originality/value It is expected this study can provide more information to establish a dynamic equation of water-lubricated rubber bearings exposed to mixed lubrication conditions.

scholarly journals Study on dynamic characteristics of gas films of spherical spiral groove hybrid gas bearings

2019 ◽  
Vol 233 (8) ◽  
pp. 1169-1181
Author(s):  
Chenhui Jia ◽  
Haijiang Zhang ◽  
Shijun Guo ◽  
Ming Qiu ◽  
Wensuo Ma ◽  
...  
Keyword(s):  
Pressure Effect ◽  
Dynamic Pressure ◽  
Iteration Algorithm ◽  
Unstable State ◽  
Gas Bearings ◽  
Damping Coefficients ◽  
The Stability ◽  
Stiffness And Damping ◽  
Film Stiffness ◽  
Gas Bearing

According to the gas film force variation law, when the bearing axis is slightly displaced from the static equilibrium position, displacement and velocity disturbance relation expressions for the gas film force increment are constructed. Moreover, combined with the bearing rotor system motion equation, calculation model equations for the gas film stiffness and damping coefficients are established. The axial and radial vibration and velocity of the gas bearings during operation are collected. The instantaneous stiffness and damping coefficients of the gas film are calculated by the rolling iteration algorithm using MATLAB. The dynamic changes in the gas film stiffness and damping under different motion states are analyzed, and the mechanism of the gas film vortex and oscillation is studied. The results demonstrate the following: (1) When the gas bearing is running in the linear steady state in cycle 1, the dynamic pressure effect is enhanced and the stability is improved by increasing the eccentricity; when the gas supply pressure is increased, the static pressure effect is enhanced and the gas film vortex is reduced, but the oscillation is strengthened. (2) With the increase in rotational speed, the gas film vortex force gradually exceeds the gas film damping force, and the stability gradually worsens, causing a fluctuation in the gas film stiffness and damping, following which singularity occurs and a half-speed vortex is formed. Meanwhile, the gas film oscillation is intensified, and the rotor enters the nonlinear stable cycle 2 state operation. (3) As the fluctuation of the film force increases, the instantaneous stiffness and damping oscillation of the film intensifies, most of the stiffness and damping coefficients exhibit distortion, and the rotor operation will enter a chaotic or unstable state. Therefore, the gas bearing stiffness and damping variation characteristics can be used to study and predict the gas bearing operating state. Finally, measures for reducing the vortex and oscillation of the gas film and improving the stability of the gas bearing operation are proposed.

Segmentation Effects on Brush Seal Leakage and Rotordynamic Coefficients

2015 ◽  
Author(s):  
Alexander O. Pugachev ◽  
Manuel Gaszner ◽  
Christos Georgakis ◽  
Paul Cooper
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Labyrinth Seal ◽  
Performance Characteristics ◽  
Radial Clearance ◽  
Single Plane ◽  
Rotordynamic Coefficients ◽  
Damping Coefficients ◽  
Brush Seal ◽  
Stiffness And Damping

This paper studies the effect of brush seal segmentation on the seal performance characteristics. A brush-labyrinth sealing configuration arranged of one brush seal downstream and two labyrinth fins upstream is studied experimentally and theoretically. The studied brush seal is of welded design installed with zero cold radial clearance. The brush seal front and back rings as well as the bristle pack are segmented radially in a single plane using the electrical discharge machining technique. The segmentation procedure results in loss of bristles at the site of the cuts altering the leakage flow structure in the seal and its performance characteristics. Two test rigs are used to obtain leakage, as well as rotordynamic stiffness and damping coefficients of the seal at different pressure ratios. The CFD-based model is used to predict the seal performance and to study in detail local changes in the flow field due to the segmentation. A back-to-back comparison of the performance of non-segmented and segmented brush seals, as well as baseline labyrinth seal is provided. The obtained results demonstrate that the segmentation in general negatively affects the performance of the studied brush-labyrinth sealing configuration. However, the segmented brush seal shows increased direct damping coefficients.

Moment Stability of Stochastic Regenerative Cutting Process

2010 ◽  
Vol 97-101 ◽  
pp. 3038-3041
Author(s):  
Xiao Qin Zhou ◽  
Wen Cai Wang ◽  
Hong Wei Zhao
Keyword(s):  
Stability Analysis ◽  
Stability Boundary ◽  
Cutting Process ◽  
Damping Coefficients ◽  
Cutting Stability ◽  
Stationary Stochastic Processes ◽  
The Stability ◽  
Stiffness And Damping ◽  
Moment Stability ◽  
Stochastic Uncertainties

The stochastic uncertainties of regenerative cutting process (RCP) are taken into consideration, and both cutting stiffness and damping coefficients are modeled as two stationary stochastic processes. The eigenvalue equations are established for the stability analysis of stochastic RCP, corresponding to the differential equations of the first and second order moments. Thus the stability analysis of stochastic RCP is transformed into that of the first two order moments. The influence of stochastic uncertainties on the cutting stability of RCP is discussed. The numerical experiments have verified that with the increase of stochastic uncertainties, the cutting stability boundary was shifted downwards significantly, and the number of lobes was also multiplied.

Sign in / Sign up

Export Citation Format

Share Document