Modeling and Nonlinear Vibration Analysis of a Rigid Rotor System Supported by the Magnetic Bearing (Effects of Delays of Both Electric Current and Magnetic Flux)

2009 ◽  
Vol 77 (1) ◽  
Author(s):  
Tsuyoshi Inoue ◽  
Yasuhiko Sugawara ◽  
Motoki Sugiyama
Keyword(s):  
Magnetic Flux ◽  
Electric Current ◽  
Magnetic Force ◽  
Magnetic Bearing ◽  
Rotor System ◽  
Active Magnetic Bearing ◽  
Nonlinear Phenomena ◽  
Rigid Rotor ◽  
Rotating Speed ◽  
First Order

Active magnetic bearing (AMB) becomes widely used in various kinds of rotating machinery. However, as the magnetic force is nonlinear, nonlinear phenomena may occur when the rotating speed becomes high and delays of electric current or magnetic flux in the AMB relatively increase. In this paper, the magnetic force in the AMB is modeled by considering both the second-order delay of the electric current and the first-order delay of the magnetic flux. The magnetic flux in the AMB is represented by a power series function of the electric current and shaft displacement, and its appropriate representation for AMB is discussed. Furthermore, by using them, the nonlinear theoretical analysis of the rigid rotor system supported by the AMB is demonstrated. The effects of the delays and other AMB parameters on the nonlinear phenomena are clarified theoretically, and they are confirmed experimentally.

Nonlinear Vibration in a Vertical Rigid Rotor Supported by the Magnetic Bearing: Case Considering the Delays of Both Electric Current and Magnetic Flux

2007 ◽  
Author(s):  
Tsuyoshi Inoue ◽  
Motoki Sugiyama ◽  
Yasuhiko Sugawara ◽  
Yukio Ishida
Keyword(s):  
Magnetic Flux ◽  
Electric Current ◽  
Magnetic Force ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Nonlinear Phenomena ◽  
Control Force ◽  
Rigid Rotor ◽  
Rotating Speed ◽  
First Order

Active magnetic bearing (AMB) becomes to be widely used in various kinds of rotating machinery. However, as the magnetic force is nonlinear, nonlinear phenomena may occur when the rotating speed becomes higher and delay of control force increases. In this paper, the magnetic force is modeled by considering both the second order delay of the electric current and the first order delay of the magnetic flux, and the AMB force is represented by a power series function of the electric current and shaft displacement. The nonlinear theoretical analysis of the vertical rigid rotor supported by AMB is demonstrated. The effects of the delays and other AMB parameters on the nonlinear phenomena are clarified theoretically and experimentally.

scholarly journals Research on Automatic Balance Control of Active Magnetic Bearing-Rigid Rotor System

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Yang Liu ◽  
Shuaishuai Ming ◽  
Siyao Zhao ◽  
Jiyuan Han ◽  
Yaxin Ma
Keyword(s):  
Vibration Control ◽  
Rotational Speed ◽  
Notch Filter ◽  
Magnetic Bearing ◽  
Rotor System ◽  
Vibration Response ◽  
Active Magnetic Bearing ◽  
Rigid Rotor ◽  
Phase Compensation ◽  
Synchronous Control

In this paper, in order to solve the problem of unbalance vibration of rigid rotor system supported by the active magnetic bearing (AMB), automatic balancing method is applied to suppress the unbalance vibration of the rotor system. Firstly, considering the dynamic and static imbalance of the rotor, the detailed dynamic equations of the AMB-rigid rotor system are established according to Newton’s second law. Then, in order to rotate the rotor around the inertia axis, the notch filter with phase compensation is used to eliminate the synchronous control current. Finally, the variable-step fourth-order Runge–Kutta iteration method is used to solve the unbalanced vibration response of the rotor system in MATLAB simulation. The effects of the rotational speed and phase compensation angle on the unbalanced vibration control are analysed in detail. It is found that the synchronous control currents would increase rapidly with the increase of rotational speed if the unbalance vibration cannot be controlled. When the notch filter with phase shift is used to balance the rotor system automatically, the control current is reduced significantly. It avoids the saturation of the power amplifier and reduces the vibration response of the rotor system. The rotor system can be stabilized over the entire operating speed range by adjusting the compensation phase of the notch filter. The method in the paper is easy to implement, and the research result can provide theoretical support for the unbalance vibration control of AMB-rotor systems.

Analysis of supercritical pitchfork bifurcation in active magnetic bearing-rotor system with current saturation

2021 ◽  
Vol 104 (1) ◽  
pp. 103-123
Author(s):  
Xiaoshen Zhang ◽  
Zhe Sun ◽  
Lei Zhao ◽  
Xunshi Yan ◽  
Jingjing Zhao ◽  
...  
Keyword(s):  
Pitchfork Bifurcation ◽  
Magnetic Bearing ◽  
Rotor System ◽  
Active Magnetic Bearing ◽  
Current Saturation

Calculation and Verification of Magnetic Field Parameters in Axial Active Magnetic Bearing

2014 ◽  
Vol 214 ◽  
pp. 143-150
Author(s):  
Piotr Graca
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Magnetic Force ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Magnetic Flux Density ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Magnetic Field Computation

The paper presents numerical modeling of an Axial Active Magnetic Bearing (AAMB) based on two-dimensional (2D) magnetic field computation. The calculations, assisted by the Finite Element Method (FEM), have focused on the determination of the magnetic flux density and the magnetic force. Obtained magnetic field parameters were then measured and verified on a physical model.

Some Nonlinear Effects of Magnetic Bearings

1999 ◽  
Author(s):  
Norbert Steinschaden ◽  
Helmut Springer
Keyword(s):  
Equations Of Motion ◽  
Period Doubling ◽  
Path Following ◽  
Nonlinear Effects ◽  
Magnetic Bearing ◽  
Operating Conditions ◽  
Active Magnetic Bearing ◽  
Nonlinear Phenomena ◽  
Amb System ◽  
Large Rotor

Abstract In order to get a better understanding of the dynamics of active magnetic bearing (AMB) systems under extreme operating conditions a simple, nonlinear model for a radial AMB system is investigated. Instead of the common way of linearizing the magnetic forces at the center position of the rotor with respect to rotor displacement and coil current, the fully nonlinear force to displacement and the force to current characteristics are used. The AMB system is excited by unbalance forces of the rotor. Especially for the case of large rotor eccentricities, causing large rotor displacements, the behaviour of the system is discussed. A path-following analysis of the equations of motion shows that for some combinations of parameters well-known nonlinear phenomena may occur, as, for example, symmetry breaking, period doubling and even regions of global instability can be observed.

Sign in / Sign up

Export Citation Format

Share Document