Heat Transfer and Thermodynamic Analyses of Some Typical Encapsulated Ice Geometries During Discharging Process

2009 ◽  
Vol 131 (8) ◽  
Author(s):  
David MacPhee ◽  
Ibrahim Dincer
Keyword(s):  
Heat Transfer ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Flow Rate ◽  
Initial Conditions ◽  
Spherical Geometry ◽  
Heat Transfer Fluid ◽  
Slab Geometry ◽  
Flow Parameters ◽  
The Difference

This study deals with the process of melting in some typical encapsulated ice thermal energy storage (TES) geometries. Cylindrical and slab capsules are compared with spherical capsules when subjected to a flowing heat transfer fluid (HTF). The effect of inlet HTF temperature and flow rate as well as the reference temperatures are investigated, and the resulting solidification and melting times, energy efficiencies, and exergy efficiencies are documented. Using ANSYS GAMBIT and FLUENT 6.0 softwares, all geometries are created, and the appropriate boundary and initial conditions are selected for the finite volume solver to proceed. Sufficient flow parameters are monitored during transient solutions to enable the calculation of all energy and exergy efficiencies. The energetically most efficient geometric scenario is obtained for the slab geometry, while the spherical geometry exergetically achieves the highest efficiencies. The difference between the two results is mainly through the accounting of entropy generation and exergy destroyed, and the largest mode of thermal exergy loss is found to be through entropy generation resulting from heat transfer accompanying phase change, although viscous dissipation is included in the analysis. All efficiency values tend to increase with decreasing HTF flow rate, but exergetically the best scenario appears to be for the spherical capsules with low inlet HTF temperature. Energy efficiency values are all well over 99%, while the exergy efficiency values range from around 72% to 84%, respectively. The results indicate that energy analyses, while able to predict viscous dissipation losses effectively, cannot correctly quantify losses inherent in cold TES systems, and in some instances predict higher than normal efficiencies and inaccurate optimal parameters when compared with exergy analyses.

Thermodynamic Analysis of Freezing and Melting Processes in a Bed of Spherical PCM Capsules

2009 ◽  
Vol 131 (3) ◽  
Author(s):  
David MacPhee ◽  
Ibrahim Dincer
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Flow Rate ◽  
Present Model ◽  
Spherical Geometry ◽  
Heat Transfer Fluid ◽  
Inlet Temperature ◽  
Main Mode ◽  
Solidification Temperature ◽  
Flow Phenomena

The solidification and melting processes in a spherical geometry are investigated in this study. The capsules considered are filled with de-ionized water, so that a network of spheres can be thought of as being the storage medium for an encapsulated ice storage module. ANSYS GAMBIT and FLUENT 6.0 packages are used to employ the present model for heat transfer fluid (HTF) past a row of such capsules, while varying the HTF inlet temperature and flow rate, as well as the reference temperatures. The present model agrees well with experimental data taken from literature and was also put through rigorous time and grid independence tests. Sufficient flow parameters are studied so that the resulting solidification and melting times, exergy and energy efficiencies, and exergy destruction could be calculated. All energy efficiencies are found to be over 99%, though viscous dissipation was included. Using exergy analysis, the exergetic efficiencies are determined to be about 75% to over 92%, depending on the HTF scenario. When the HTF flow rate is increased, all efficiencies decrease, due mainly to increasing heat losses and exergy dissipation. The HTF temperatures, which stray farther from the solidification temperature of water, are found to be most optimal exergetically, but least optimal energetically. The main reason for this, as well as the main mode of loss exergetically, is due to entropy generation accompanying heat transfer, which is responsible for over 99.5% of exergy destroyed in all cases. The results indicate that viewing the heat transfer and fluid flow phenomena in a bed of encapsulated spheres, it is of utmost importance to assess the major modes of entropy generation; in this case from heat transfer accompanying phase change.

Effects of magnetic field and viscous dissipation on entropy generation of mixed convection in porous lid-driven cavity with corner heater

2016 ◽  
Vol 26 (5) ◽  
pp. 1548-1566 ◽  
Author(s):  
Sameh E Ahmed ◽  
Hakan F. Öztop ◽  
Khaled Al-Salem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Heat Transfer Fluid ◽  
Content Type ◽  
Driven Cavity ◽  
Corner Heater

Purpose – The purpose of this paper is to investigate the effects of magnetic field and viscous dissipation on mixed convection heat transfer, fluid flow and entropy generation in a porous media filled square enclosure heated with corner isothermal heater. Design/methodology/approach – Finite volume method has been used to solve governing equations. A code is developed by FORTRAN and entropy generation is calculated from the obtained results of velocities and temperature. Results are presented via streamlines, isotherms, local and mean Nusselt number for different values of Richardson number (0.001=Ri=100), Hartmann number (0.001=Ha=100), Darcy number (0.001=Da=0.1), length of heaters (0.25=hx=hy=0.75) and viscous dissipation factors (10−4=ε=10−6). Findings – It is observed that entropy is generated mostly due to lid-driven wall and right side of the heater. Entropy generation decreases with increasing of Hartmann number and heat transfer increases with decreasing of viscous parameter. Originality/value – The originality of this work is to application of magnetic field and viscous dissipation on entropy generation in a lid-driven cavity with corner heater. Here, both corner heater and the external forces are original parameters.

scholarly journals Using Graphene Nanoplatelets Nanofluid in a Closed-Loop Evacuated Tube Solar Collector—Energy and Exergy Analysis

2021 ◽  
Vol 5 (10) ◽  
pp. 277
Author(s):  
Soudeh Iranmanesh ◽  
Mahyar Silakhori ◽  
Mohammad S. Naghavi ◽  
Bee C. Ang ◽  
Hwai C. Ong ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Flow Rate ◽  
Closed Loop ◽  
Heat Transfer Fluid ◽  
Second Law ◽  
Bejan Number ◽  
Pumping Power ◽  
Energy And Exergy ◽  
Second Law Analysis

Recently, nanofluid application as a heat transfer fluid for a closed-loop solar heat collector is receiving great attention among the scientific community due to better performance. The performance of solar systems can be assessed effectively with the exergy method. The present study deals with the thermodynamic performance of the second law analysis using graphene nanoplatelets nanofluids. Second law analysis is the main tool for explaining the exergy output of thermodynamic and energy systems. The performance of the closed-loop system in terms of energy and exergy was determined by analyzing the outcome of field tests in tropical weather conditions. Moreover, three parameters of entropy generation, pumping power and Bejan number were also determined. The flowrates of 0.5, 1 and 1.5 L/min and GNP mass percentage of 0.025, 0.5, 0.075 and 0.1 wt% were used for these tests. The results showed that in a flow rate of 1.5 L/min and a concentration of 0.1 wt%, exergy and thermal efficiencies were increased to about 85.5 and 90.7%, respectively. It also found that entropy generation reduced when increasing the nanofluid concentration. The Bejan number surges up when increasing the concentration, while this number decreases with the enhancement of the volumetric flow rate. The pumping power of the nanofluid-operated system for a 0.1 wt% particle concentration at 0.5 L/min indicated 5.8% more than when pure water was used as the heat transfer fluid. Finally, this investigation reveals the perfect conditions that operate closest to the reversible limit and helps the system make the best improvement.

scholarly journals Analytical Assessment of (Al2O3–Ag/H2O) Hybrid Nanofluid Influenced by Induced Magnetic Field for Second Law Analysis with Mixed Convection, Viscous Dissipation and Heat Generation

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 498
Author(s):  
Wasim Ullah Khan ◽  
Muhammad Awais ◽  
Nabeela Parveen ◽  
Aamir Ali ◽  
Saeed Ehsan Awan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Heat Generation ◽  
Transfer Rate ◽  
Second Law ◽  
Hybrid Nanofluid ◽  
Entropy Generation Number ◽  
Generation Number ◽  
Second Law Analysis

The current study is an attempt to analytically characterize the second law analysis and mixed convective rheology of the (Al2O3–Ag/H2O) hybrid nanofluid flow influenced by magnetic induction effects towards a stretching sheet. Viscous dissipation and internal heat generation effects are encountered in the analysis as well. The mathematical model of partial differential equations is fabricated by employing boundary-layer approximation. The transformed system of nonlinear ordinary differential equations is solved using the homotopy analysis method. The entropy generation number is formulated in terms of fluid friction, heat transfer and Joule heating. The effects of dimensionless parameters on flow variables and entropy generation number are examined using graphs and tables. Further, the convergence of HAM solutions is examined in terms of defined physical quantities up to 20th iterations, and confirmed. It is observed that large λ1 upgrades velocity, entropy generation and heat transfer rate, and drops the temperature. High values of δ enlarge velocity and temperature while reducing heat transport and entropy generation number. Viscous dissipation strongly influences an increase in flow and heat transfer rate caused by a no-slip condition on the sheet.

Entropy generation optimization for MHD natural convection of a nanofluid in porous media-filled enclosure with active parts and viscous dissipation

2017 ◽  
Vol 27 (2) ◽  
pp. 379-399 ◽  
Author(s):  
M.A. Mansour ◽  
Sameh Elsayed Ahmed ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Convection Flow ◽  
Negative Effects ◽  
Content Type ◽  
Volume Method

Purpose This paper aims to investigate the entropy generation due to magnetohydrodynamic natural convection flow and heat transfer in a porous enclosure filled with Cu-water nanofluid in the presence of viscous dissipation effect. The left and right walls of the cavity are thermally insulated. There are heated and cold parts, and these are placed on the bottom and top wall, respectively, whereas the remaining parts are thermally insulated. Design/methodology/approach The finite volume method is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published woks is presented and is found to be in an excellent agreement. Findings The minimization of entropy generation and local heat transfer according to different values of the governing parameters are presented in details. It is found that the presence of magnetic field has negative effects on the local entropy generation because of heat transfer and the local total entropy generation. Also, the increase in the heated part length leads to a decrease in the local Nusselt number. Originality/value This problem is original, as it has not been considered previously.

Combined Effects of Temperature and Velocity Jump on the Heat Transfer, Fluid Flow, and Entropy Generation Over a Single Rotating Disk

2010 ◽  
Vol 132 (11) ◽  
Author(s):  
A. Arikoglu ◽  
G. Komurgoz ◽  
I. Ozkol ◽  
A. Y. Gunes
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Entropy Generation ◽  
Rotating Disk ◽  
Heat Transfer Fluid ◽  
Combined Effects ◽  
Jump Conditions ◽  
Governing Equations ◽  
Velocity Jump ◽  
Effects Of Temperature

The present work examines the effects of temperature and velocity jump conditions on heat transfer, fluid flow, and entropy generation. As the physical model, the axially symmetrical steady flow of a Newtonian ambient fluid over a single rotating disk is chosen. The related nonlinear governing equations for flow and thermal fields are reduced to ordinary differential equations by applying so-called classical approach, which was first introduced by von Karman. Instead of a numerical method, a recently developed popular semi numerical-analytical technique; differential transform method is employed to solve the reduced governing equations under the assumptions of velocity and thermal jump conditions on the disk surface. The combined effects of the velocity slip and temperature jump on the thermal and flow fields are investigated in great detail for different values of the nondimensional field parameters. In order to evaluate the efficiency of such rotating fluidic system, the entropy generation equation is derived and nondimensionalized. Additionally, special attention has been given to entropy generation, its characteristic and dependency on various parameters, i.e., group parameter, Kn and Re numbers, etc. It is observed that thermal and velocity jump strongly reduce the magnitude of entropy generation throughout the flow domain. As a result, the efficiency of the related physical system increases. A noticeable objective of this study is to give an open form solution of nonlinear field equations. The reduced recurative form of the governing equations presented gives the reader an opportunity to see the solution in open series form.

scholarly journals Contribution to the Parametric Study of the Performance of A Parabolic Trough Collector

2021 ◽  
Vol 321 ◽  
pp. 02016
Author(s):  
Belkacem Bouali ◽  
Hanane-Maria Regue
Keyword(s):  
Heat Transfer ◽  
Mass Flow ◽  
Flow Rate ◽  
Optimal Operation ◽  
Heat Transfer Fluid ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Heat Transfer Fluids ◽  
Ansys Cfx ◽  
Different Seasons

This paper presents an analysis of the performance of a parabolic trough collector (PTC) according to some key operating parameters. The effects of the secondary reflector, the length and thickness of the absorber tube (receiver tube) and the flow rate of the heat transfer fluid (HTF) are investigated. The main objective is to determine an optimal operation, which improves the performance of a traditional PTC. The target variables are the temperature at the outlet of the tube, the amount of energy collected by the HTF and the efficiency of the system. The solar flux data concern the city of LAGHOUAT located in the south of Algeria. Four days in different seasons are considered. The optical analysis of the system is performed by using the open source SolTrace code. The output of this analysis is used as a boundary condition for the CFD solver. The conjugate heat transfer and the fluid flow through the absorber tube are simulated by using ANSYS-CFX solver. Water is considered as heat transfer fluids. The obtained results show that the use of a curved secondary reflector significantly improves the performance of the traditional PTC. As the thickness of the tube increases, the heat storage in the material increases, which increases the temperature at the exit of the tube and therefore the efficiency of the system. However, the length of the tube depends on the mass flow of the HTF and vice versa. To keep the efficiency constant by choosing another length, it is necessary to choose a mass flow rate proportional to the flow rate corresponding to the initial length.

scholarly journals Performance Evaluation of a Small-Scale Latent Heat Thermal Energy Storage Unit for Heating Applications Based on a Nanocomposite Organic PCM

2019 ◽  
Vol 3 (4) ◽  
pp. 88 ◽  
Author(s):  
Maria K. Koukou ◽  
George Dogkas ◽  
Michail Gr. Vrachopoulos ◽  
John Konstantaras ◽  
Christos Pagkalos ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Thermal Behavior ◽  
Latent Heat ◽  
Flow Rate ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Transfer Fluid ◽  
Small Scale ◽  
Solidification Processes

A small-scale latent heat thermal energy storage (LHTES) unit for heating applications was studied experimentally using an organic phase change material (PCM). The unit comprised of a tank filled with the PCM, a staggered heat exchanger (HE) for transferring heat from and to the PCM, and a water pump to circulate water as a heat transfer fluid (HTF). The performance of the unit using the commercial organic paraffin A44 was studied in order to understand the thermal behavior of the system and the main parameters that influence heat transfer during the PCM melting and solidification processes. The latter will assist the design of a large-scale unit. The effect of flow rate was studied given that it significantly affects charging (melting) and discharging (solidification) processes. In addition, as organic PCMs have low thermal conductivity, the possible improvement of the PCM’s thermal behavior by means of nanoparticle addition was investigated. The obtained results were promising and showed that the use of graphite-based nanoplatelets improves the PCM thermal behavior. Charging was clearly faster and more efficient, while with the appropriate tuning of the HTF flow rate, an efficient discharging was accomplished.

Sign in / Sign up

Export Citation Format

Share Document