Magnetic Field Effect on the Hydronium Diffusivity at an Enzymatic Biofuel Cell Anode via Atomistic Analysis

Author(s):  
C. P. Chiu ◽  
C. W. Hong

This paper investigates how a constant magnetic field between the anode catalyst and the electrode surface affects the performance of an enzymatic biofuel cell. Molecular dynamics techniques were employed to observe the nanoscale proton transport phenomenon. The simulation model comprised a Au electrode, pyrroloquinoline quinine, flavin adenine dinucleotide, and glucose macromolecules with hydronium ions in aqueous solution. A constant magnetic field was applied parallel to the anode electrode surface in the simulation process. It is found that the magnetic field is able to enhance the hydronium mobility in the solution and the rate of the biochemical reaction increased. Simulation results show that the hydronium diffusivity increases from 3.80×10−9 m2/s to a maximum 19.91×10−9 m2/s at a glucose concentration of 27 mM and from 13.02×10−9 m2/s to a maximum 36.44×10−9 m2/s at a glucose concentration of 82 mM.

1995 ◽  
Vol 51 (22) ◽  
pp. 15947-15956 ◽  
Author(s):  
W. T. Coffey ◽  
D. S. F. Crothers ◽  
Yu. P. Kalmykov ◽  
J. T. Waldron

2015 ◽  
Vol 1120-1121 ◽  
pp. 962-966
Author(s):  
Sergey V. Konovalov ◽  
Nadezhda Yaropolova ◽  
Dmitry Zaguyliaev ◽  
Victor Gromov ◽  
Yurii F. Ivanov ◽  
...  

The constant magnetic field effect (B≤0.6 T) on creep of polycrystalline copper and its dislocation substructure has been established. The correlation of creep rate to time up to failure has been determined. The magnetic field effect on change of dislocation substructure parameters depending on the distance to the surface of failure (at a distance of 2, 4, 7, 10 and 20 mm from the surface of failure) under creep has been studied. It has been shown that magnetic field affects greatly the redistribution of dislocation substructure types and their scalar density of dislocations. The magnetic field effect on polycrystalline copper is connected with magneto-induction relaxation of dislocation structure.


2004 ◽  
Vol 9 (2) ◽  
pp. 129-138
Author(s):  
J. Kleiza ◽  
V. Kleiza

A method for calculating the values of specific resistivity ρ as well as the product µHB of the Hall mobility and magnetic induction on a conductive sample of an arbitrary geometric configuration with two arbitrary fitted current electrodes of nonzero length and has been proposed an grounded. During the experiment, under the constant value U of voltage and in the absence of the magnetic field effect (B = 0) on the sample, the current intensities I(0), IE(0) are measured as well as the mentioned parameters under the effect of magnetic fields B1, B2 (B1 ≠ B2), i.e.: IE(β(i)), I(β(i)), i = 1, 2. It has been proved that under the constant difference of potentials U and sample thickness d, the parameters I(0), IE(0) and IE(β(i)), I(β(i)), i = 1, 2 uniquely determines the values of the product µHB and specific resistivity ρ of the sample. Basing on the conformal mapping method and Hall’s tensor properties, a relation (a system of nonlinear equations) between the above mentioned quantities has been found.


Sign in / Sign up

Export Citation Format

Share Document