A Kinetoelastic Formulation of Compliant Mechanism Optimization

2009 ◽  
Vol 1 (2) ◽  
Author(s):  
Michael Yu Wang
Keyword(s):  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
State Equation ◽  
Rigid Bodies ◽  
Leaf Spring ◽  
Compliance Matrix ◽  
Initial Development ◽  
Mechanism Optimization ◽  
Current Design ◽  
Translational Joint

The current design algorithms for compliant mechanisms often generate solutions that imitate rigid-body linkages by means of point flexures or flexure pivots, by using the popular spring model formulation. This paper presents a kinetoelastic formulation for compliant mechanism optimization. With a state equation of the mechanism defined by the elasticity theory, the model incorporates not only the kinematic function requirements of the mechanism but, more importantly, the necessary conditions on the compliance characteristics of the mechanism’s structure. The kinematics of the compliant mechanism is defined on rigid bodies of input/output ports and is related to a set of kinetoelastic factors of the mechanism’s compliance matrix. The kinetoelastic formulation is applied to the problem of optimizing a compliant translational joint, producing compliant designs with compliance properties such as the leaf spring type sliding joint as opposed to the notch-type joint. This paper represents an initial development toward a more general methodology for compliant mechanism optimization.

A Kinetoelastic Approach to Continuum Compliant Mechanism Optimization

2008 ◽  
Author(s):  
Michael Yu Wang
Keyword(s):  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Optimization Technique ◽  
State Equation ◽  
Rigid Bodies ◽  
Leaf Spring ◽  
Initial Development ◽  
Structure Topology ◽  
New Perspective ◽  
New Formulation

This paper presents a new approach to designing continuum compliant mechanisms—the kinetoelastic approach. We present a new formulation of the design problem, incorporating not only the kinematic function requirements of the mechanism but, more importantly, the compliance characteristics of the mechanism’s structure. In our kinetoelastic model, the kinematics of the compliant mechanism is defined on rigid-bodies of input/output ports and is related to a set of kinetoelastic factors of mechanism’s structure in a state equation of the mechanism defined by the elasticity theory. Central to defining the compliance characteristics of the mechanism is the mechanism eigensystem with principal eigen-stiffness or eigen-compliance. In this new perspective, we further apply the kinetoelastic model to the problem of designing compliant translational joints with a structure topology optimization technique. This application demonstrates the capability of the kinetoelastic approach in producing compliant designs with desirable compliance properties, such as in the leaf-spring type sliding joint as opposed to the notch-type joint. The paper represents an initial development towards a complete methodology for continuum compliant mechanism design.

Analysis of Parasitic Motion in Compliant Mechanisms Using Eigenwrenches and Eigentwists

2018 ◽  
Author(s):  
Werner W. P. J. van de Sande ◽  
Just L. Herder
Keyword(s):  
Compliant Mechanisms ◽  
Screw Theory ◽  
Compliant Mechanism ◽  
Degree Of Freedom ◽  
Compliance Matrix ◽  
Parasitic Motion ◽  
Actual Degree ◽  
Motion Metrics ◽  
Mechanism Kinematic ◽  
Kinematic Information

Parasitic motion is undesired in precision mechanisms, it causes unwanted kinematics. These erroneous motions are especially apparent in compliant mechanisms. Usually an analysis of parasitic motion is only valid for one type of mechanism. Kinematic information is imbedded in the compliance matrix of any mechanism; an eigenscrew decomposition expresses this kinematic information as screws. It uses screw theory to identify the lines along which a force yields a parallel translation and a rotation yields a parallel moment. These lines are called eigenwrenches and eigentwists. Any other load on the compliant mechanism will lead to parasitic motion. This article introduces two parasitic motion metrics using eigenscrew decomposition: the parasitic resultant from an applied screw and the deviation of an actual degree of freedom from a desired degree of freedom. These metrics are applicable to all compliant mechanism and allow comparison between two compliant mechanisms. These metrics are applied to some common compliant mechanisms as an example.

Design Synthesis of 2-D Compliant Mechanisms Utilizing Serial Concatenation of Building Blocks

2009 ◽  
Author(s):  
Girish Krishnan ◽  
Charles Kim ◽  
Sridhar Kota
Keyword(s):  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Building Blocks ◽  
Unique Point ◽  
Compliance Matrix ◽  
Design Synthesis ◽  
Parametric Variation ◽  
Point Of Interest

In this section we implement a characterization based on eigen-twists and eigen-wrenches for the deformation of a compliant mechanism at a given point of interest. For 2-D mechanisms, this involves characterizing the compliance matrix at a unique point called the center of elasticity. At the center of elasticity, the translation and rotational compliances are decoupled. We give an intuitive graphical understanding of compliance at this point by representing the translational compliance as an ellipse and the coupling between the translational and rotational parameters as vectors (Coupling vectors). This representation gives us an intuitive understanding of series and parallel combination of building blocks. We obtain a parametric variation of these quantities for a compliant dyad building block, and show with examples how a mechanism can be synthesized by a combination of building blocks to obtain desired deformation requirements. We also propose a combination of series and parallel concatenation to achieve more than one specification simultaneously. Such a characterization can be extended to synthesize involving multiple ports.

Compliant Mechanism Configurations for Vehicle Suspension Systems

2004 ◽  
Author(s):  
Timothy Allred ◽  
Larry L. Howell ◽  
Spencer P. Magleby ◽  
Alexandre E. Guerinot
Keyword(s):  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Vehicle Suspension ◽  
Leaf Spring ◽  
Potential Cost ◽  
Flexible Beams ◽  
Suspension Systems ◽  
New Concepts ◽  
Spring Suspension ◽  
Control Forces

This paper explores the use of compliant mechanisms or flexible beams in vehicle suspension systems. An example of a compliant suspension mechanism is the leaf spring suspension commonly found on trucks. New concepts are developed through rigid-body replacement synthesis and other methods with the objective of improving wheel control. The compliant A-arm is discussed and shown to be a promising concept for further research based on FEA results and other comparisons. The A-Arm concept performs well in controlling wheel deflections and has low stress values in response to control forces when compared to other compliant concepts considered and leaf spring configurations. The A-Arm uses less space than than the other compliant concepts considered and the potential cost of manufacture and assembly is potentially equal to current leaf spring congifurations.

An Intrinsic Geometric Framework for the Building Block Synthesis of Single Point Compliant Mechanisms

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Girish Krishnan ◽  
Charles Kim ◽  
Sridhar Kota
Keyword(s):  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Single Point ◽  
Building Blocks ◽  
Geometric Framework ◽  
Compliance Matrix ◽  
Rotational Components ◽  
Compliance Requirements ◽  
Insight Into

In this paper, we implement a characterization based on eigentwists and eigenwrenches for the synthesis of a compliant mechanism at a given point. For 2D mechanisms, this involves characterizing the compliance matrix at a unique point called the center of elasticity, where translational and rotational compliances are decoupled. Furthermore, the translational compliance may be represented graphically as an ellipse and the coupling between the translational and rotational components as vectors. These representations facilitate geometric insight into the operations of serial and parallel concatenations. Parametric trends are ascertained for the compliant dyad building block and are utilized in example problems involving serial concatenation of building blocks. The synthesis technique is also extended to combination of series and parallel concatenation to achieve any compliance requirements.

Designing Distributed Compliant Mechanisms With Characteristic Stiffness

2007 ◽  
Author(s):  
Shikui Chen ◽  
Michael Yu Wang
Keyword(s):  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Model ◽  
Mechanism Optimization ◽  
Edge Problem ◽  
Geometric Boundary ◽  
Novel Method ◽  
New Formulation ◽  
Sharp Interfaces ◽  
Large Output

A novel method is proposed in this paper to address the cutting-edge problem of topology optimization of distributed compliant mechanisms, which requires the design to possess both large output displacements and evenly distributed compliance simultaneously. The design is represented by a level-set model that precisely specifies the distinct material regions and their sharp interfaces as well as the geometric boundary of the structure, capable of performing topological changes and capturing geometric evolutions at the interface and the boundary. Existing techniques for eliminating de facto hinges in the design are reviewed. Further, the intrinsic deficiencies in the widely used “spring model” are discussed and a new formulation considering the “characteristic stiffness” of the mechanism is proposed. The proposed method is demonstrated with benchmark examples of compliant mechanism optimization. The result is a design with evenly distributed compliance and a more desirable characteristic, which uniquely distinguishes our method.

Bistable Compliant Four-Bar Mechanisms With a Single Torsional Spring

2006 ◽  
Author(s):  
Adarsh Mavanthoor ◽  
Ashok Midha
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanism Design ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Stored Energy ◽  
Element Analysis ◽  
Bistable Behavior ◽  
Torsional Spring ◽  
Bistable Mechanism

Significant reduction in cost and time of bistable mechanism design can be achieved by understanding their bistable behavior. This paper presents bistable compliant mechanisms whose pseudo-rigid-body models (PRBM) are four-bar mechanisms with a torsional spring. Stable and unstable equilibrium positions are calculated for such four-bar mechanisms, defining their bistable behavior for all possible permutations of torsional spring locations. Finite Element Analysis (FEA) and simulation is used to illustrate the bistable behavior of a compliant mechanism with a straight compliant member, using stored energy plots. These results, along with the four-bar and the compliant mechanism information, can then be used to design a bistable compliant mechanism to meet specified requirements.

Design of a Generic Zero Stiffness Compliant Joint

2010 ◽  
Author(s):  
Femke M. Morsch ◽  
Just L. Herder
Keyword(s):  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Great Promise ◽  
Optimized Design ◽  
Analytic Model ◽  
Total Potential ◽  
Fea Model ◽  
Compliant Joint ◽  
Joint Element ◽  
Cross Axis

The objective of this paper is to design a generic zero stiffness compliant joint. This compliant joint could be used as a generic construction element in a compliant mechanism. To avoid the spring-back behavior of conventional compliant joints, the principle of static balancing is applied, implying that for each position of the joint the total potential energy should be constant. To this end, a conventional balanced mechanism, consisting of two pivoted bodies which are balanced with two zero-free-length springs, is taken as an initial concept. The joint is replaced by a compliant cross-axis flexural pivot and each spring is replaced by a pair of compliant leaf springs. For both parts an analytic model was implemented and a configuration with the lowest energy fluctuation was found through optimization. A FEA model was used to verify the analytic model of the optimized design. A prototype was manufactured and tested. Both the FEA model and the experiment confirm the reduction of the needed moment to rotate the compliant joint. The experiment shows the balanced compliant joint is not completely balanced but the moment required to rotate the joint is reduced by 70%. Thus, a statically balanced compliant generic joint element was designed which bears great promise in designing statically balanced compliant mechanisms and making this accessible to any designer.

A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments

1998 ◽  
Vol 120 (3) ◽  
pp. 392-400 ◽  
Author(s):  
A. Saxena ◽  
S. N. Kramer
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
Beam Equation ◽  
Large Deflections ◽  
Euler Beam ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads. Because of this fact, traditional methods of deflection analysis do not apply. Since the nonlinearities introduced by these large deflections make the system comprising such members difficult to solve, parametric deflection approximations are deemed helpful in the analysis and synthesis of compliant mechanisms. This is accomplished by representing the compliant mechanism as a pseudo-rigid-body model. A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms. In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads. A numerical integration technique using quadrature formulae has been employed to solve the large deflection Bernoulli-Euler beam equation for the tip deflection. Implementation of this scheme is simpler than the elliptic integral formulation and provides very accurate results. An example for the synthesis of a compliant mechanism using the proposed model is also presented.

Sign in / Sign up

Export Citation Format

Share Document