Role of Cytoskeletal Components in Stress-Relaxation Behavior of Adherent Vascular Smooth Muscle Cells

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Jason D. Hemmer ◽  
Jiro Nagatomi ◽  
Scott T. Wood ◽  
Alexey A. Vertegel ◽  
Delphine Dean ◽  
...  

A number of recent studies have demonstrated the effectiveness of atomic force microscopy (AFM) for characterization of cellular stress-relaxation behavior. However, this technique’s recent development creates considerable need for exploration of appropriate mechanical models for analysis of the resultant data and of the roles of various cytoskeletal components responsible for governing stress-relaxation behavior. The viscoelastic properties of vascular smooth muscle cells (VSMCs) are of particular interest due to their role in the development of vascular diseases, including atherosclerosis and restenosis. Various cytoskeletal agents, including cytochalasin D, jasplakinolide, paclitaxel, and nocodazole, were used to alter the cytoskeletal architecture of the VSMCs. Stress-relaxation experiments were performed on the VSMCs using AFM. The quasilinear viscoelastic (QLV) reduced-relaxation function, as well as a simple power-law model, and the standard linear solid (SLS) model, were fitted to the resultant stress-relaxation data. Actin depolymerization via cytochalasin D resulted in significant increases in both rate of relaxation and percentage of relaxation; actin stabilization via jasplakinolide did not affect stress-relaxation behavior. Microtubule depolymerization via nocodazole resulted in nonsignificant increases in rate and percentage of relaxation, while microtubule stabilization via paclitaxel caused significant decreases in both rate and percentage of relaxation. Both the QLV reduced-relaxation function and the power-law model provided excellent fits to the data (R2=0.98), while the SLS model was less adequate (R2=0.91). Data from the current study indicate the important role of not only actin, but also microtubules, in governing VSMC viscoelastic behavior. Excellent fits to the data show potential for future use of both the QLV reduced-relaxation function and power-law models in conjunction with AFM stress-relaxation experiments.

2016 ◽  
Vol 49 (5) ◽  
pp. 381-396 ◽  
Author(s):  
Farzad A Nobari Azar ◽  
Murat Şen

Natural rubber/chloroprene rubber (NR/CR) blends are among the commonly used rubber blends in industry and continuously are exposed to severe weather changes. To investigate the effects of accelerator type on the network structure and stress relaxation of unaged and aged NR/CE vulcanizates, tetramethyl thiuram disulfide, 2-mercaptobenzothiazole, and diphenyl guanidine accelerators have been chosen to represent fast, moderate, and slow accelerator groups, respectively. Three batches have been prepared with exactly the same components and mixing conditions differing only in accelerator type. Temperatures scanning stress relaxation and pulse nuclear magnetic resonance techniques have been used to reveal the structural changes of differently accelerated rubber blends before and after weathering. Nonoxidative thermal decomposition analyses have been carried out using a thermogravimetric analyzer. Results indicate that there is a strong interdependence between accelerator type and stress relaxation behavior, network structure, cross-linking density, and aging behavior of the blends. Accelerator type also affects decomposition energy of the blends.


2010 ◽  
Vol 107 (6) ◽  
pp. 063509 ◽  
Author(s):  
Xuanhe Zhao ◽  
Nathaniel Huebsch ◽  
David J. Mooney ◽  
Zhigang Suo

2013 ◽  
Vol 328 ◽  
pp. 950-954
Author(s):  
Wei Wei Zhang ◽  
Hong Xu ◽  
Hong Yuan Li

An analytical method based on a creep model is being developed to investigate the effect of retightening on stress relaxation behavior for high-temperature turbine and valve studs/bolts. In order to validate the approach, the calculated results are compared to the results of uniaxial reloading stress relaxation testing, which were performed by the National Research Institute for Metals of Japan (NRIM) for 12Cr-1Mo-1W-1/4V stainless steel bolting material at 550°C. It was shown that the proposed model based on Altenbach-Gorash-Naumenko creep model for the primary and steady state creep could be applied for the present data. The calculated residual stresses versus time curves were in good agreement with the measured for initial stress level of 273.6MPa at 550°C and for specific reloading time intervals of 24, 72, 240, and 720 hours.


2018 ◽  
Vol 6 (2) ◽  
pp. 025318 ◽  
Author(s):  
Muhammad Shafiq Irfan ◽  
Yasir Qayyum Gill ◽  
Motahira Hashmi ◽  
Sana Ullah ◽  
Farhan Saeed ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document