Finite Element Model Tuning Using Measured Mass Properties and Ground Vibration Test Data

2009 ◽  
Vol 131 (1) ◽  
Author(s):  
Chan-gi Pak
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Ground Vibration ◽  
Element Model ◽  
Mode Shapes ◽  
Test Fixture ◽  
Mass Properties ◽  
Model Tuning ◽  
Final Optimization ◽  
Mother Ship

A simple and efficient approach for tuning finite element models to match computed frequencies, mode shapes, and mass properties to the experimental data is introduced in this study. The model tuning procedure proposed in this study is based on a series of optimizations. This approach has been successfully applied to create an equivalent beam finite element model for the X-37 drogue chute test fixture with the X-planes pylon. The goal was a simple model capable of being analyzed in a captive carry configuration with the B-52H mother ship. This study has shown that natural frequencies, corresponding mode shapes, and mass properties from the updated finite element model achieved at the final optimization iteration have excellent agreement with corresponding measured data.

scholarly journals Sensitivity Analysis of the Influence of Structural Parameters on Dynamic Behaviour of Highly Redundant Cable-Stayed Bridges

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
B. Asgari ◽  
S. A. Osman ◽  
A. Adnan
Keyword(s):  
Sensitivity Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Model Updating ◽  
Structural Parameters ◽  
Element Model ◽  
Structural Behavior ◽  
Model Tuning ◽  
The Finite Element Model ◽  
Cable Stayed Bridges

The model tuning through sensitivity analysis is a prominent procedure to assess the structural behavior and dynamic characteristics of cable-stayed bridges. Most of the previous sensitivity-based model tuning methods are automatic iterative processes; however, the results of recent studies show that the most reasonable results are achievable by applying the manual methods to update the analytical model of cable-stayed bridges. This paper presents a model updating algorithm for highly redundant cable-stayed bridges that can be used as an iterative manual procedure. The updating parameters are selected through the sensitivity analysis which helps to better understand the structural behavior of the bridge. The finite element model of Tatara Bridge is considered for the numerical studies. The results of the simulations indicate the efficiency and applicability of the presented manual tuning method for updating the finite element model of cable-stayed bridges. The new aspects regarding effective material and structural parameters and model tuning procedure presented in this paper will be useful for analyzing and model updating of cable-stayed bridges.

scholarly journals Dynamic Analysis of Tapered Thin-Walled Beams Using Spectral Finite Element Method

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Yiping Shen ◽  
Zhijun Zhu ◽  
Songlai Wang ◽  
Gang Wang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Wind Turbine ◽  
Element Model ◽  
Rotor Blades ◽  
Mode Shapes ◽  
Modal Frequency ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Spectral Finite Element

Tapered thin-walled structures have been widely used in wind turbine and rotor blade. In this paper, a spectral finite element model is developed to investigate tapered thin-walled beam structures, in which torsion related warping effect is included. First, a set of fully coupled governing equations are derived using Hamilton’s principle to account for axial, bending, and torsion motion. Then, the differential transform method (DTM) is applied to obtain the semianalytical solutions in order to formulate the spectral finite element. Finally, numerical simulations are conducted for tapered thin-walled wind turbine rotor blades and validated by the ANSYS. Modal frequency results agree well with the ANSYS predictions, in which approximate 30,000 shell elements were used. In the SFEM, one single spectral finite element is needed to perform such calculations because the interpolation functions are deduced from the exact semianalytical solutions. Coupled axial-bending-torsion mode shapes are obtained as well. In summary, the proposed spectral finite element model is able to accurately and efficiently to perform the modal analysis for tapered thin-walled rotor blades. These modal frequency and mode shape results are important to carry out design and performance evaluation of the tapered thin-walled structures.

Dynamic Characteristics and Finite Element Model Updating of Micromachined Torsion Structures

2013 ◽  
Vol 284-287 ◽  
pp. 1831-1835
Author(s):  
Wei Hsin Gau ◽  
Kun Nan Chen ◽  
Yunn Lin Hwang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Model Updating ◽  
Speckle Pattern ◽  
Element Model ◽  
Mode Shapes ◽  
Electronic Speckle Pattern Interferometry ◽  
Finite Element Model Updating ◽  
Element Analysis

In this paper, two experimental techniques, Electronic Speckle Pattern Interferometry and Stroboscopic Interferometry, and two different finite element analysis packages are used to measure or to analyze the frequencies and mode shapes of a micromachined, cross-shaped torsion structure. Four sets of modal data are compared and shown having a significant discrepancy in their frequency values, although their mode shapes are quite consistent. Inconsistency in the frequency results due to erroneous inputs of geometrical and material parameters to the finite element analysis can be salvaged by applying the finite element model updating procedure. Two updating cases show that the optimization sequences converge quickly and significant improvements in frequency prediction are achieved. With the inclusion of the thickness parameter, the second case yields a maximum of under 0.4% in frequency difference, and all parameters attain more reliable updated values.

Finite Element Model Tuning with Spatially-Dense 3D Modes

2010 ◽  
Vol 51 (6) ◽  
pp. 933-945 ◽  
Author(s):  
E. D. Swenson ◽  
J. T. Black
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Model Tuning

Comparing Measured Responses of an Offshore Structure with Operational Modal Analysis assisted Classical Model Approach

2020 ◽  
pp. 1-10
Author(s):  
Bruna Nabuco ◽  
Sandro D. Amador ◽  
Evangelos I. Katsanos ◽  
Ulf T. Tygesen ◽  
Erik Damgaard Christensen ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Modal Analysis ◽  
Element Model ◽  
Operating Conditions ◽  
Operational Modal Analysis ◽  
Mode Shapes ◽  
Wave Forces ◽  
Wave Load ◽  
Offshore Structure

Abstract Aiming to ensure the structural integrity of an offshore structure, wave-induced responses have been measured during normal operating conditions. Operational Modal Analysis is applied to the data obtained from continuously monitoring the structure. Sensors placed only on the topside of an offshore platform are sufficient to provide information to identify the modal properties of the structure, such as natural frequencies, damping ratios, and mode shapes. A finite element model is created and updated in line with the identified dynamic properties for applying a modal expansion technique in the interest of accessing information at any point of the structure. Wave radars are also placed at the platform from which the wave forces are calculated based on basic industrial standard models. In this way, the wave kinematics are estimated according to the linear wave theory associated with Wheeler stretching. Since this study is related to offshore structures composed by slender elements, the wave forces are estimated using Morison formulation. By assigning typical values to the drag and inertia coefficients, wave loads are estimated and applied to the updated finite element model. For the diffraction effect, the wave load has also been evaluated according to MacCamy and Fuchs theory. The responses obtained from this procedure are compared with measured responses. In addition to describing the process, this paper presents a case study to verify the theory using monitoring data from a tripod jacket. Results indicate realistic response estimation that contributes to the knowledge about the state of the structure.

Support-Condition Analyses of Rotating Beams Under Distributed Imbalance Loading

2011 ◽  
Author(s):  
Kai Jokinen ◽  
Erno Keskinen ◽  
Marko Jorkama ◽  
Wolfgang Seemann
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Cross Section ◽  
Cross Sections ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Constant Cross Section ◽  
Support Condition ◽  
Beam Elements

In roll balancing the behaviour of the roll can be studied either experimentally with trial weights or, if the roll dimensions are known, analytically by forming a model of the roll to solve response to imbalance. Essential focus in roll balancing is to find the correct amount and placing for the balancing mass or masses. If this selection is done analytically the roll model used in calculations has significant effect to the balancing result. In this paper three different analytic methods are compared. In first method the mode shapes of the roll are defined piece wisely. The roll is divided in to five parts having different cross sections, two shafts, two roll ends and a shell tube of the roll. Two boundary conditions are found for both supports of the roll and four combining equations are written to the interfaces of different roll parts. Totally 20 equations are established to solve the natural frequencies and to form the mode shapes of the non-uniform roll. In second model the flexibility of shafts and the stiffness of the roll ends are added to the support stiffness as serial springs and the roll is modelled as a one flexibly supported beam having constant cross section. Finally the responses to imbalance of previous models are compared to finite element model using beam elements. Benefits and limitations of each three model are then discussed.

Hydroelastic Modal Analysis of the Perforated Cylindrical Shell in SMART

2011 ◽  
Author(s):  
Youngin Choi ◽  
Seungho Lim ◽  
Kyoung-Su Park ◽  
No-Cheol Park ◽  
Young-Pil Park ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Steam Generators ◽  
Structure Interaction ◽  
The Finite Element Model ◽  
Reactor Internals

The System-integrated Modular Advanced ReacTor (SMART) developed by KAERI includes components like a core, steam generators, coolant pumps, and a pressurizer inside the reactor vessel. Though the integrated structure improves the safety of the reactor, it can be excited by an earthquake and pump pulsations. It is important to identify dynamic characteristics of the reactor internals considering fluid-structure interaction caused by inner coolant for preventing damage from the excitations. Thus, the finite element model is constructed to identify dynamic characteristics and natural frequencies and mode shapes are extracted from this finite element model.

Dynamic Analysis of Flexible Structures Using Component Mode Synthesis

1989 ◽  
Vol 56 (4) ◽  
pp. 874-880 ◽  
Author(s):  
M. De Smet ◽  
C. Liefooghe ◽  
P. Sas ◽  
R. Snoeys
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Degrees Of Freedom ◽  
Flexible Structures ◽  
Element Model ◽  
Component Mode Synthesis ◽  
Mode Shapes ◽  
Flexible Robot ◽  
Preliminary Calculation ◽  
Resonance Frequencies

In this paper a dynamic model of a flexible robot is built out of a finite element model of each of its links. The number of degrees-of-freedom of these models is strongly reduced by applying the Component Mode Synthesis technique which involves the preliminary calculation of a limited number of mode shapes of the separate links. As can be seen from examples, the type of boundary conditions thereby imposed in the nodes in which one link is connected to the others, strongly determines the accuracy of the calculated resonance frequencies of the robot. The method is applied to an industrial manipulator. The reduced finite element model of the robot is changed in order to match the numerically and experimentally (modal analysis) determined resonance data. Further, the influence of the position of the robot on its resonance frequencies is studied using the optimized numerical model.

Sign in / Sign up

Export Citation Format

Share Document