Running Torque of Ball Bearings With Polymer Lubricant (Running Torque Formulas of Deep Groove Ball Bearings Under Axial Loads)

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
Masayuki Kanatsu ◽  
Hiroyuki Ohta
Keyword(s):  
Rolling Resistance ◽  
Mineral Oil ◽  
Type I ◽  
Ball Bearings ◽  
Type Ii ◽  
Shearing Resistance ◽  
Deep Groove ◽  
Axially Loaded ◽  
Bearing Rings ◽  
Running Torque

A running torque analysis was performed on axially loaded deep groove ball bearings lubricated with a polymer lubricant. The analysis included a Type I and a Type II bearing. The Type I bearing has a stamped steel riveted cage with its cavity packed with the polymer lubricant. The ball surface, except for the contact points of the ball and the raceways, was covered with the polymer lubricant. The Type II bearing had the polymer lubricant packed only on the riveted parts of the cage; the balls were not covered with the polymer lubricant. The analysis was applied to a 6206 deep groove ball bearing axially loaded in a range typical of preloads applied in actual application to this size bearing to establish bearing tare torque. The results were compared to an available database. The running torque formulas for deep groove ball bearings with polymer lubricant under axial load were proposed as the sums of the running torque caused by the shearing resistance of the mineral oil between the bearing rings and the polymer lubricant, the elastic hysteresis, the differential slip, the spinning friction of the balls, the elastohydrodynamic lubrication (EHL) viscous rolling resistance, and the friction between the balls and the polymer lubricant (or the cage). The effects of the sources of the running torque were investigated. In the case of the Type I bearing, the running torque caused by the friction between the balls and the polymer lubricant, the EHL viscous rolling resistance, and the shearing resistance of the mineral oil between the bearing rings and the polymer lubricant significantly affect the running torque. In the case of the Type II Bearing, the running torque caused by the EHL viscous rolling resistance and the shearing resistance of the mineral oil between the bearing rings and the polymer lubricant significantly affect the running torque. A reasonable correlation exists between the analysis and the database. However, the analysis needs to be further validated with bearing data from different size deep groove ball bearings run under varying loads and speeds.

scholarly journals The Peptide-Substrate-binding Domain of Collagen Prolyl 4-Hydroxylases Is a Tetratricopeptide Repeat Domain with Functional Aromatic Residues

2004 ◽  
Vol 279 (50) ◽  
pp. 52255-52261 ◽  
Author(s):  
Mira Pekkala ◽  
Reija Hieta ◽  
Ulrich Bergmann ◽  
Kari I. Kivirikko ◽  
Rik K. Wierenga ◽  
...  
Keyword(s):  
Substrate Binding ◽  
Binding Domain ◽  
Tetratricopeptide Repeat ◽  
Side Chains ◽  
Type I ◽  
Type Ii ◽  
Peptide Substrate ◽  
Deep Groove ◽  
Peptide Substrate Binding ◽  
Substrate Binding Domain

Collagen prolyl 4-hydroxylases catalyze the formation of 4-hydroxyproline in -X-Pro-Gly-sequences and have an essential role in collagen synthesis. The vertebrate enzymes are α2β2tetramers in which the catalytic α-subunits contain separate peptide-substrate-binding and catalytic domains. We report on the crystal structure of the peptide-substrate-binding domain of the human type I enzyme refined at 2.3 Å resolution. It was found to belong to a family of tetratricopeptide repeat domains that are involved in many protein-protein interactions and consist of five α-helices forming two tetratricopeptide repeat motifs plus the solvating helix. A prominent feature of its concave surface is a deep groove lined by tyrosines, a putative binding site for proline-rich Tripeptides. Solvent-exposed side chains of three of the tyrosines have a repeat distance similar to that of a poly-l-proline type II helix. The aromatic surface ends at one of the tyrosines, where the groove curves almost 90° away from the linear arrangement of the three tyrosine side chains, possibly inducing a bent conformation in the bound peptide. This finding is consistent with previous suggestions by others that a minimal structural requirement for proline 4-hydroxylation may be a sequence in the poly-l-proline type II conformation followed by a β-turn in the Pro-Gly segment. Site-directed mutagenesis indicated that none of the tyrosines was critical for tetramer assembly, whereas most of them were critical for the binding of a peptide substrate and inhibitor both to the domain and the α2β2enzyme tetramer.

Heat-Etching with a Bullivant Type II Simple Freeze-Cleave Device

1970 ◽  
Vol 28 ◽  
pp. 106-107 ◽  
Author(s):  
Ronald S. Weinstein ◽  
N. Scott McNutt
Keyword(s):  
New Zealand ◽  
General Hospital ◽  
Massachusetts General Hospital ◽  
Type I ◽  
Type Ii ◽  
Collaborative Effort ◽  
Temperature And Pressure ◽  
The University

The Type I simple cold block device was described by Bullivant and Ames in 1966 and represented the product of the first successful effort to simplify the equipment required to do sophisticated freeze-cleave techniques. Bullivant, Weinstein and Someda described the Type II device which is a modification of the Type I device and was developed as a collaborative effort at the Massachusetts General Hospital and the University of Auckland, New Zealand. The modifications reduced specimen contamination and provided controlled specimen warming for heat-etching of fracture faces. We have now tested the Mass. General Hospital version of the Type II device (called the “Type II-MGH device”) on a wide variety of biological specimens and have established temperature and pressure curves for routine heat-etching with the device.

Labelling of non-A, non-B hepatitis infected chimpanzee hepatocytes with nuclease-gold conjugates

1984 ◽  
Vol 42 ◽  
pp. 250-251
Author(s):  
G. D. Gagne ◽  
M. F. Miller ◽  
D. A. Peterson
Keyword(s):  
Endoplasmic Reticulum ◽  
Experimental Infection ◽  
Uranyl Acetate ◽  
Type I ◽  
Cellular Injury ◽  
Type Ii ◽  
Tubular Structures ◽  
Type Iii ◽  
Type Iv ◽  
Infected Chimpanzee

Experimental infection of chimpanzees with non-A, non-B hepatitis (NANB) or with delta agent hepatitis results in the appearance of characteristic cytoplasmic alterations in the hepatocytes. These alterations include spongelike inclusions (Type I), attached convoluted membranes (Type II), tubular structures (Type III), and microtubular aggregates (Type IV) (Fig. 1). Type I, II and III structures are, by association, believed to be derived from endoplasmic reticulum and may be morphogenetically related. Type IV structures are generally observed free in the cytoplasm but sometimes in the vicinity of type III structures. It is not known whether these structures are somehow involved in the replication and/or assembly of the putative NANB virus or whether they are simply nonspecific responses to cellular injury. When treated with uranyl acetate, type I, II and III structures stain intensely as if they might contain nucleic acids. If these structures do correspond to intermediates in the replication of a virus, one might expect them to contain DNA or RNA and the present study was undertaken to explore this possibility.

Comparative surface and ultrastructural views of methylotrophic bacteria by TEM, STEM, SE, and freeze-etch electron microscopy.

1987 ◽  
Vol 45 ◽  
pp. 792-793
Author(s):  
T.A. Fassel ◽  
M.J. Schaller ◽  
M.E. Lidstrom ◽  
C.C. Remsen
Keyword(s):  
Cytoplasmic Membrane ◽  
Structural Features ◽  
Methylotrophic Bacteria ◽  
Type I ◽  
Type Ii ◽  
Membrane Complex ◽  
Oxidation Of Methane ◽  
Methane Oxidizing Bacteria ◽  
Wall Structures ◽  
Methylomonas Albus

Methylotrophic bacteria play an Important role in the environment in the oxidation of methane and methanol. Extensive intracytoplasmic membranes (ICM) have been associated with the oxidation processes in methylotrophs and chemolithotrophic bacteria. Classification on the basis of ICM arrangement distinguishes 2 types of methylotrophs. Bundles or vesicular stacks of ICM located away from the cytoplasmic membrane and extending into the cytoplasm are present in Type I methylotrophs. In Type II methylotrophs, the ICM form pairs of peripheral membranes located parallel to the cytoplasmic membrane. Complex cell wall structures of tightly packed cup-shaped subunits have been described in strains of marine and freshwater phototrophic sulfur bacteria and several strains of methane oxidizing bacteria. We examined the ultrastructure of the methylotrophs with particular view of the ICM and surface structural features, between representatives of the Type I Methylomonas albus (BG8), and Type II Methylosinus trichosporium (OB-36).

OPTICAL STUDIES OF TYPE I AND TYPE II RECOMBINATION IN GaAs-AlAs QUANTUM WELLS

1987 ◽  
Vol 48 (C5) ◽  
pp. C5-525-C5-528 ◽  
Author(s):  
K. J. MOORE ◽  
P. DAWSON ◽  
C. T. FOXON
Keyword(s):  
Quantum Wells ◽  
Type I ◽  
Type Ii ◽  
Optical Studies

An old friend is better than two new ones? Approaches to market research in the context of digital transformation for the antitrust laws enforcement

2020 ◽  
pp. 37-55 ◽  
Author(s):  
A. E. Shastitko ◽  
O. A. Markova
Keyword(s):  
Business Models ◽  
Rapid Development ◽  
Digital Transformation ◽  
Market Definition ◽  
Type I ◽  
Type Ii ◽  
Digital Platforms ◽  
Advantages And Disadvantages ◽  
Pass Through ◽  
Type Ii Errors

Digital transformation has led to changes in business models of traditional players in the existing markets. What is more, new entrants and new markets appeared, in particular platforms and multisided markets. The emergence and rapid development of platforms are caused primarily by the existence of so called indirect network externalities. Regarding to this, a question arises of whether the existing instruments of competition law enforcement and market analysis are still relevant when analyzing markets with digital platforms? This paper aims at discussing advantages and disadvantages of using various tools to define markets with platforms. In particular, we define the features of the SSNIP test when being applyed to markets with platforms. Furthermore, we analyze adjustment in tests for platform market definition in terms of possible type I and type II errors. All in all, it turns out that to reduce the likelihood of type I and type II errors while applying market definition technique to markets with platforms one should consider the type of platform analyzed: transaction platforms without pass-through and non-transaction matching platforms should be tackled as players in a multisided market, whereas non-transaction platforms should be analyzed as players in several interrelated markets. However, if the platform is allowed to adjust prices, there emerges additional challenge that the regulator and companies may manipulate the results of SSNIP test by applying different models of competition.

Two Different UGT1A1 Mutations causing Crigler–Najjar Syndrome types I and II in an Iranian Family

2015 ◽  
Vol 24 (4) ◽  
pp. 523-526 ◽  
Author(s):  
Yoshihiro Maruo ◽  
Mahdiyeh Behnam ◽  
Shinichi Ikushiro ◽  
Sayuri Nakahara ◽  
Narges Nouri ◽  
...  
Keyword(s):  
Serum Bilirubin ◽  
Total Serum Bilirubin ◽  
Total Serum ◽  
Compound Heterozygous ◽  
Type I ◽  
Syndrome Type ◽  
Type Ii ◽  
Wild Type ◽  
Iranian Family ◽  
Udp Glucuronosyltransferase

Background: Crigler–Najjar syndrome type I (CN-1) and type II (CN-2) are rare hereditary unconjugated hyperbilirubinemia disorders. However, there have been no reports regarding the co-existence of CN-1 and CN-2 in one family. We experienced a case of an Iranian family that included members with either CN-1 or CN-2. Genetic analysis revealed a mutation in the bilirubin UDP-glucuronosyltransferase (UGT1A1) gene that resulted in residual enzymatic activity.Case report: The female proband developed severe hyperbilirubinemia [total serum bilirubin concentration (TB) = 34.8 mg/dL] with bilirubin encephalopathy (kernicterus) and died after liver transplantation. Her family history included a cousin with kernicterus (TB = 30.0 mg/dL) diagnosed as CN-1. Her great grandfather (TB unknown) and uncle (TB = 23.0 mg/dL) developed jaundice, but without any treatment, they remained healthy as CN-2. Results: The affected cousin was homozygous for a novel frameshift mutation (c.381insGG, p.C127WfsX23). The affected uncle was compound heterozygous for p.C127WfsX23 and p.V225G linked with A(TA)7TAA. p.V225G-UGT1A1 reduced glucuronidation activity to 60% of wild-type. Thus, linkage of A(TA)7TAA and p.V225G might reduce UGT1A1 activity to 18%–36 % of the wild-type. Conclusion: Genetic and in vitro expression analyses are useful for accurate genetic counseling for a family with a history of both CN-1 and CN-2. Abbreviations: CN-1: Crigler–Najjar syndrome type I; CN-2: Crigler–Najjar syndrome type II; GS: Gilbert syndrome; UGT1A1: bilirubin UDP-glucuronosyltransferase; WT: Wild type; TB: total serum bilirubin.

Type I Endoleaks: Is Aneurysm Rupture Risk Dependent on the Presence of Type II Endoleaks?

2002 ◽  
Vol 9 (5) ◽  
pp. 707-709 ◽  
Author(s):  
Stéphan Haulon ◽  
Serge Willoteaux ◽  
Mohamad Koussa ◽  
Pascal Halna ◽  
Jean-Paul Beregi
Keyword(s):  
Aneurysm Rupture ◽  
Type I ◽  
Type Ii ◽  
Rupture Risk
Sign in / Sign up

Export Citation Format

Share Document