A Modified Transfer Matrix Method for Asymmetric Rotor-Bearing Systems

1994 ◽  
Vol 116 (3) ◽  
pp. 309-317 ◽  
Author(s):  
Yuan Kang ◽  
An-Chen Lee ◽  
Yuan-Pin Shih
Keyword(s):  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Harmonic Balance Method ◽  
Continuous System ◽  
Euler Beam ◽  
Rotating Shaft ◽  
Rotor Bearing ◽  
Asymmetric Rotor ◽  
Steady State Responses

A modified transfer matrix method (MTMM) is developed to analyze rotor-bearing systems with an asymmetric shaft and asymmetric disks. The rotating shaft is modeled by a Rayleigh-Euler beam considering the effects of the rotary inertia and gyroscopic moments. Specifically, a transfer matrix of the asymmetric shaft segments is derived in a continuous-system sense to give accurate solutions. The harmonic balance method is incorporated in the transfer matrix equations, so that steady-state responses of synchronous and superharmonic whirls can be determined. A numerical example is presented to demonstrate the effectiveness of this approach.

A Modified Transfer Matrix Method for Linear Rotor-Bearing Systems

1991 ◽  
Vol 58 (3) ◽  
pp. 776-783 ◽  
Author(s):  
An-Chen Lee ◽  
Yuan Kang ◽  
Shin-Li Liu
Keyword(s):  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Continuous System ◽  
Large Degree ◽  
System Concept ◽  
Rotor Bearing ◽  
Steady State Responses ◽  
Time Marching ◽  
Fixed Matrix

The steady-state responses of linear flexible rotor-bearing systems are analyzed by the modified transfer matrix method. The transfer matrix has the advantage of solving the problems in frequency domain with fixed matrix size. This makes the method more economical in analyzing a large degree-of-freedom rotor system than many time-marching integrating methods. In this paper, the modifications of transfer matrix method include that the transfer matrix of shaft is derived from the “continuous system” concept instead of conventional “lumped system” concept, and the paper tries to extend the transfer matrix method to fit synchronous elliptical orbit and nonsynchronous multi-lobed whirling orbit. To demonstrate the applications of the method, three examples are presented; two synchronous and one nonsynchronous.

The Analysis of Linear Rotor-Bearing Systems: A General Transfer Matrix Method

1993 ◽  
Vol 115 (4) ◽  
pp. 490-497 ◽  
Author(s):  
An-Chen Lee ◽  
Yuan-Pin Shih ◽  
Yuan Kang
Keyword(s):  
Steady State ◽  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Three Dimensional ◽  
Continuous System ◽  
State Variables ◽  
Rotor Bearing ◽  
Steady State Responses ◽  
State Responses

A general transfer matrix method (GTMM) is developed in the present work for analyzing the steady-state responses of rotor-bearing systems with an unbalancing shaft. Specifically, we derived the transfer matrix of shaft segments by considering the state variables of shaft in a continuous system sense to give the most general formulation. The shaft unbalance, axial force, and axial torque are all taken into consideration so that the completeness of transfer matrix method for steady-state analysis of linear rotor-bearing systems is reached. To demonstrate the effectiveness of this approach, a numerical example is presented to estimate the effect of three-dimensional distribution of shaft unbalance on the steady-state responses by GTMM and finite element method (FEM).

An Improved Transfer Matrix Method for Steady-State Analysis of Nonlinear Rotor-Bearing Systems

2002 ◽  
Vol 124 (2) ◽  
pp. 303-310 ◽  
Author(s):  
J. W. Zu ◽  
Z. Ji
Keyword(s):  
Steady State ◽  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Roller Bearing ◽  
Harmonic Balance Method ◽  
Beam Theory ◽  
Rotating Shaft ◽  
Damping Characteristics ◽  
Rotor Bearing

An improved transfer matrix method is developed to analyze nonlinear rotor-bearing systems. The rotating shaft is described by the Timoshenko beam theory which considers the effect of the rotary inertia and shear deformation. A typical roller bearing model is assumed which has cubic nonlinear spring and linear damping characteristics. Transfer matrices for the Timoshenko shaft element, disk element, and nonlinear bearing element are derived and the global transfer matrix is formed. The steady-state response of synchronous, subharmonic, and superharmonic whirls is determined using the harmonic balance method. Two numerical examples are presented to demonstrate the effectiveness of this approach.

A Hybrid Method for the Vibration Analysis of Rotor-Bearing Systems

1991 ◽  
Vol 205 (2) ◽  
pp. 131-137 ◽  
Author(s):  
R Firoozian ◽  
H Zhu
Keyword(s):  
Finite Element ◽  
Transfer Matrix ◽  
Hybrid Method ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Vibration Analysis ◽  
Mode Shapes ◽  
Rotating Shaft ◽  
Critical Speeds ◽  
Rotor Bearing

The transfer matrix method together with a digital computer form the foundation of the dynamic analysis of rotor-bearing systems. The properties of each segment of the rotating shaft are expressed in simple matrix form and the overall dynamic behaviour is then obtained by successive multiplication of the element matrices. The main drawback associated with this method is the numerical instability in calculating natural frequencies for complex systems. The finite element method, on the other hand, uses the element stiffness and mass matrices to form the global equation of motion for the complete system. This avoids the numerical problems of the transfer matrix method at the expense of the computer memory requirements. The new method described in this paper combines the transfer matrix and finite element techniques to form a powerful algorithm for vibration analysis of rotor-bearing systems. It is shown that the accuracy improves significantly when the transfer matrix for each shaft segment is obtained from finite element techniques. The accuracy and efficiency of the hybrid method are compared with the transfer matrix method for a simply supported uniform rotating shaft where an analytical solution for the critical speeds and mode shapes is available. The method is then applied to a flexibly supported uniform shaft and a non-uniform shaft with a large disc to show the capability of the method for finding the critical speeds of complex rotor-bearing systems.

Dynamic Analysis of Geared Rotor-Bearing Systems by the Transfer Matrix Method

1995 ◽  
Author(s):  
Siu-Tong Choi ◽  
Sheng-Yang Mau
Keyword(s):  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Vibration Analysis ◽  
Transmission Error ◽  
Mode Shapes ◽  
Rotor Systems ◽  
Gear Mesh ◽  
Mass Unbalance ◽  
Rotor Bearing

Abstract In this paper, an analytical study of the dynamic characteristics of geared rotor-bearing systems by the transfer matrix method is presented. Rotating shafts are modeled as Timoshenko beam with shear deformation and gyroscopic effects taken into account. The gear mesh is modeled as a pair of rigid disks connected by a spring-damper set and a transmission-error exciter. The transfer matrix of a gear mesh is developed. The coupling motions of the lateral and torsional vibration are studied. In free vibration analysis of geared rotor systems, natural frequencies and corresponding mode shapes, and the whirl frequencies under different spin speeds are determined. Effects of bearing stiffness, isotropic and orthotropic bearings, pressure angle of the gear mesh are studied. In steady-state vibration analysis, responses due to the excitation of mass unbalance and the transmission error are studied. Parametric characteristics of geared rotor systems are discussed.

Study of Transfer Matrix of Rolling Bearing Including Squeeze Film Damper

2012 ◽  
Vol 490-495 ◽  
pp. 618-622
Author(s):  
Hua Tao Tang ◽  
Xin Yue Wu
Keyword(s):  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Rolling Bearing ◽  
Squeeze Film ◽  
Body System ◽  
Squeeze Film Damper ◽  
Rotor Bearing ◽  
Multi Body ◽  
Bearing System

The transfer matrix of rolling bearing including squeeze film damper (SFD) is studied, and the rotor – bearing system is modeled by transfer matrix method of multi-body system. It is proved by an example that the method, which provides a new idea to solve the problem of complex rotor – bearing system, is feasible and effective.

Research on Vibration and Instability of the Double-Span Beam Base on Transfer Matrix

2009 ◽  
Vol 16-19 ◽  
pp. 160-163 ◽  
Author(s):  
Ting Liu ◽  
Fei Feng ◽  
Ya Zhe Chen ◽  
Bang Chun Wen
Keyword(s):  
Free Vibration ◽  
Transfer Matrix ◽  
Axial Compression ◽  
Axial Force ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Natural Frequencies ◽  
Euler Beam ◽  
Intermediate Support ◽  
Critical Axial Force

The vibration and instability of a beam which is Double-span Euler Beam with axial force is studied by transfer matrix method. The transfer matrix of transverse free vibration and axial compression of the beam is derived. Then based on the assembled transferring matrix, the effect of the position of intermediate support on the natural frequencies and Euler critical axial force of the beam is discussed, which offered a useful method to start research of vibration of complicated framework.

scholarly journals Transfer Matrix Method for Natural Vibration Analysis of Tree System

2012 ◽  
Vol 2012 ◽  
pp. 1-19 ◽  
Author(s):  
Bin He ◽  
Xiaoting Rui ◽  
Huiling Zhang
Keyword(s):  
Transfer Matrix ◽  
Transfer Matrix Method ◽  
Matrix Method ◽  
Natural Vibration ◽  
Damage Identification ◽  
Continuous System ◽  
Dynamical Response ◽  
Transfer Matrices ◽  
Chain System ◽  
Mechanics Model

The application of Transfer matrix method (TMM) ranges from linear/nonlinear vibration, composite structure, and multibody system to calculating static deformation, natural vibration, dynamical response, and damage identification. Generally TMM has two characteristics: (1) the TMM formulae share similarity to the chain mechanics model in terms of topology structure; then TMM often is selected as a powerful tool to analyze the chain system. (2) TMM is adopted to deal with the problems of the discrete system, continuous system, and especial discrete/continuous coupling system with the uniform matrix form. In this investigation, a novel TMM is proposed to analyze the natural vibration of the tree system. In order to make the TMM of the tree system have the two above advantages of the TMM of the chain system, the suitable state vectors and transfer matrices of the typical components of the tree system are constructed. Then the topology comparability between the mechanics model and its corresponding formulae of TMM can be adopted to assembling the transfer matrices and transfer equations of the global tree system. Two examples of natural vibration problems validating the method are given. The formulation of the proposed TMM is mathematically intuitive and can be held and applied by the engineers easily.

Sign in / Sign up

Export Citation Format

Share Document