Natural Frequencies and Mode Shapes of Elliptic Plates With Boundary Characteristic Orthogonal Polynomials as Assumed Shape Functions

1993 ◽  
Vol 115 (3) ◽  
pp. 353-358 ◽  
Author(s):  
C. Rajalingham ◽  
R. B. Bhat ◽  
G. D. Xistris
Keyword(s):  
Coordinate System ◽  
Orthogonal Polynomials ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Mode Shapes ◽  
Polar Coordinate System ◽  
Free Boundaries ◽  
Natural Modes ◽  
Polar Coordinate ◽  
Boundary Characteristic

The natural frequencies and natural modes of vibration of uniform elliptic plates with clamped, simply supported and free boundaries are investigated using the Rayleigh-Ritz method. A modified polar coordinate system is used to investigate the problem. Energy expressions in the Cartesian coordinate system are transformed into the modified polar coordinate system. Boundary characteristic orthogonal polynomials in the radial direction, and trigonometric functions in the angular direction are used to express the deflection of the plate. These deflection shapes are classified into four basic categories, depending on their symmetrical or antisymmetrical properties about the major and minor axes of the ellipse. The first six natural modes in each of the above categories are presented in the form of contour plots.

Natural Frequencies and Mode Shapes of Elliptic Plates With Boundary Characteristic Orthogonal Polynomials As Assumed Shape Functions

1991 ◽  
Author(s):  
C. Rajalingham ◽  
R. B. Bhat ◽  
G. D. Xistris
Keyword(s):  
Coordinate System ◽  
Orthogonal Polynomials ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Mode Shapes ◽  
Polar Coordinate System ◽  
Free Boundaries ◽  
Natural Modes ◽  
Polar Coordinate ◽  
Boundary Characteristic

Abstract The natural frequencies and natural modes of vibration of uniform elliptic plates with clamped, simply supported and free boundaries are investigated using Rayleigh-Ritz method. A modified polar coordinate system is used to investigate the problem. Energy expressions in Cartesian coordinate system are transformed into the modified polar coordinate system. Boundary characteristic orthogonal polynomials in the radial direction, and trigonometric functions in the angular direction are used to express the deflection of the plate. These deflection shapes are classified into four basic categories, depending on its symmetrical or antisymmetrical property about the major and minor axes of the ellipse. The first six natural modes in each of the above categories are presented in the form of contour plots.

Natural Frequencies of Parallelogrammic Plates Using Characteristic Orthogonal Polynomials in Rayleigh-Ritz Method

1992 ◽  
Author(s):  
L. T. Lee ◽  
W. F. Pon
Keyword(s):  
Boundary Conditions ◽  
Coordinate System ◽  
Orthogonal Polynomials ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Energy Functional ◽  
Comprehensive Treatment ◽  
Energy Functionals ◽  
Simply Supported ◽  
Cartesian Coordinate

Abstract Natural frequencies of parallelogrammic plates are obtained by employing a set of beam characteristic orthogonal polynomials in the Rayleigh-Ritz method. The orthogonal polynomials are generalted by using a Gram-Schmidt process, after the first member is constructed so as to satisfy all the boundary conditions of the corresponding beam problems accompanying the plate problems. The strain energy functional and kinetic energy functionals are transformed from Cartesian coordinate system to a skew coordinate system. The natural frequencies obtained by using the orthogonal polynomial functions are compared with those obtained by other methods with all four edges clamped boundary conditions and greet agreements are found between them. The natural frequencies for parallelogrammic plates with other boundary conditions, such as four edges simply supported, clamped-free and simply supported-free, are also obtained. This method is considered as a better and accurate comprehensive treatment for this type of problems.

Analysis of In-Plane Modal Characteristics of an Annular Disk With Multiple Point Supports

2009 ◽  
Author(s):  
S. Bashmal ◽  
R. Bhat ◽  
S. Rakheja
Keyword(s):  
Finite Element ◽  
Orthogonal Polynomials ◽  
Ritz Method ◽  
Element Model ◽  
Free Vibrations ◽  
Mode Shapes ◽  
Multiple Point ◽  
Annular Disk ◽  
Free Boundary Conditions ◽  
Boundary Characteristic

In-plane free vibrations of an isotropic, elastic annular disk constrained at some points on the inner and outer boundaries are investigated. The presented study is relevant to various practical problems including disks clamped by bolts along the inner and outer edges or the railway wheel vibrations. The boundary characteristic orthogonal polynomials are employed in the Rayleigh-Ritz method to obtain the frequency parameters and the associated mode shapes. The boundary characteristic orthogonal polynomials are generated for the free boundary conditions of the disk while artificial springs are used to realize clamped conditions at discrete points. The frequency parameters for different point constraint conditions are evaluated and compared with those computed from a finite element model to demonstrate the validity of the proposed method. The computed mode shapes are presented for a disk with different point constraints at the inner and outer boundaries to demonstrate the free in-plane vibration behavior of the disk. Results show that addition of point supports causes some of the modes to split into two different frequencies with different mode shapes. The effects of different orientations of multiple point supports on the frequency parameters and mode shapes are also discussed.

scholarly journals In-Plane free Vibration Analysis of an Annular Disk with Point Elastic Support

2011 ◽  
Vol 18 (4) ◽  
pp. 627-640 ◽  
Author(s):  
S. Bashmal ◽  
R. Bhat ◽  
S. Rakheja
Keyword(s):  
Boundary Conditions ◽  
Orthogonal Polynomials ◽  
Ritz Method ◽  
Free Vibration Analysis ◽  
Free Vibrations ◽  
Outer Edge ◽  
Mode Shapes ◽  
Annular Disk ◽  
Different Boundary Conditions ◽  
Boundary Characteristic

In-plane free vibrations of an elastic and isotropic annular disk with elastic constraints at the inner and outer boundaries, which are applied either along the entire periphery of the disk or at a point are investigated. The boundary characteristic orthogonal polynomials are employed in the Rayleigh-Ritz method to obtain the frequency parameters and the associated mode shapes. Boundary characteristic orthogonal polynomials are generated for the free boundary conditions of the disk while artificial springs are used to account for different boundary conditions. The frequency parameters for different boundary conditions of the outer edge are evaluated and compared with those available in the published studies and computed from a finite element model. The computed mode shapes are presented for a disk clamped at the inner edge and point supported at the outer edge to illustrate the free in-plane vibration behavior of the disk. Results show that addition of point clamped support causes some of the higher modes to split into two different frequencies with different mode shapes.

scholarly journals Boundary Characteristic Orthogonal Polynomials in the Study of Transverse Vibrations of Nonhomogeneous Rectangular Plates with Bilinear Thickness Variation

2012 ◽  
Vol 19 (3) ◽  
pp. 349-364 ◽  
Author(s):  
R. Lal ◽  
Yajuvindra Kumar
Keyword(s):  
Orthogonal Polynomials ◽  
Ritz Method ◽  
Cartesian Product ◽  
Three Dimensional ◽  
Mode Shapes ◽  
Thickness Variation ◽  
Rectangular Plates ◽  
Transverse Vibrations ◽  
Modes Of Vibration ◽  
Boundary Characteristic

The free transverse vibrations of thin nonhomogeneous rectangular plates of variable thickness have been studied using boundary characteristic orthogonal polynomials in the Rayleigh-Ritz method. Gram-Schmidt process has been used to generate these orthogonal polynomials in two variables. The thickness variation is bidirectional and is the cartesian product of linear variations along two concurrent edges of the plate. The nonhomogeneity of the plate is assumed to arise due to linear variations in Young's modulus and density of the plate material with the in-plane coordinates. Numerical results have been computed for four different combinations of clamped, simply supported and free edges. Effect of the nonhomogeneity and thickness variation with varying values of aspect ratio on the natural frequencies of vibration is illustrated for the first three modes of vibration. Three dimensional mode shapes for all the four boundary conditions have been presented. A comparison of results with those available in the literature has been made.

Vibration of non-homogeneous plates using two-dimensional orthogonal polynomials as shape functions in the Rayleigh—Ritz method

1999 ◽  
Vol 213 (7) ◽  
pp. 707-714 ◽  
Author(s):  
S Chakraverty ◽  
M Petyt
Keyword(s):  
Aspect Ratio ◽  
Orthogonal Polynomials ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Two Dimensional ◽  
Shape Functions ◽  
Curved Boundary ◽  
Exact Agreement ◽  
Dimensional Boundary ◽  
Boundary Characteristic

This paper presents the use of two-dimensional boundary characteristic orthogonal polynomials as the shape functions in the Rayleigh—Ritz method to study the vibration of non-homogeneous plates with a curved boundary, and of elliptical plates in particular. The non-homogeneity considered here is a sort of generalized radial tapering that belongs to a special class such that the taper always extends to zero elasticity and zero density at the plate edges. The first five natural frequencies are reported here for various combinations of the degrees of non-homogeneity. Plots have been presented to show the effect of the aspect ratio on different modes of vibrations for various shapes of elliptic plates and degrees of non-homogeneity. The results for non-homogeneous elliptical plates are entirely new and are not available elsewhere. Comparison can only be made for homogeneous plates, and in this case the results have been found to be in exact agreement with the results of available literature.

Sign in / Sign up

Export Citation Format

Share Document