Experimental Study on the Three-Dimensional Flow Within a Compressor Cascade With Tip Clearance: Part I—Velocity and Pressure Fields

1993 ◽  
Vol 115 (3) ◽  
pp. 435-443 ◽  
Author(s):  
S. Kang ◽  
C. Hirsch
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Surface Flow ◽  
Tip Clearance ◽  
Tip Vortex ◽  
Compressor Cascade ◽  
Three Dimensional Flow ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Dimensional Flow

Experimental results from a study of the three-dimensional flow in a linear compressor cascade with stationary endwall at design conditions are presented for tip clearance levels of 1.0, 2.0, and 3.3 percent of chord, compared with the no-clearance case. In addition to five-hole probe measurements, extensive surface flow visualizations are conducted. It is observed that for the smaller clearance cases a weak horseshoe vortex forms in the front of the blade leading edge. At all the tip gap cases, a multiple tip vortex structure with three discrete vortices around the midchord is found. The tip leakage vortex core is well defined after the midchord but does not cover a significant area in traverse planes. The presence of the tip leakage vortex results in the passage vortex moving close to the endwall and the suction side.

scholarly journals Experimental Study on the Three Dimensional Flow Within a Compressor Cascade With Tip Clearance: Part I — Velocity and Pressure Fields

1992 ◽  
Author(s):  
Shun Kang ◽  
Ch. Hirsch
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Suction Side ◽  
Horseshoe Vortex ◽  
Surface Flow ◽  
Tip Clearance ◽  
Tip Vortex ◽  
Compressor Cascade ◽  
Tip Leakage Vortex ◽  
Tip Leakage

Experimental results from a study of the 3-D flow in a linear compressor cascade with stationary endwall at design conditions are presented for tip clearance levels of 1.0, 2.0 and 3.3 percent of chord, compared with the no clearance case. In addition to five-hole probe measurements, extensive surface flow visualizations are conducted. It is observed that for the smaller clearance cases a weak horseshoe vortex forms in the front of the blade leading edge. At all the tip gap cases, a multiple tip vortex structure with three discrete vortices around the midchord is found. The tip leakage vortex core is well defined after the midchord but does not cover a significantly great area in traverse planes. The presence of the tip leakage vortex results in the passage vortex moving close to the endwall and to the suction side.

Experimental Study on the Three-Dimensional Flow Within a Compressor Cascade With Tip Clearance: Part II—The Tip Leakage Vortex

1993 ◽  
Vol 115 (3) ◽  
pp. 444-450 ◽  
Author(s):  
S. Kang ◽  
C. Hirsch
Keyword(s):  
Vortex Core ◽  
Three Dimensional ◽  
Leading Edge ◽  
Tip Clearance ◽  
Tip Vortex ◽  
Vortex Center ◽  
Compressor Cascade ◽  
Suction Surface ◽  
Tip Leakage Vortex ◽  
Tip Leakage

An analysis of the experimental data of a linear compressor cascade with tip clearance is presented with special attention to the development of the tip leakage vortex. A method for determining the tip vortex core size, center position, and vorticity or circulation from the measured data is proposed, based on the assumption of a circular tip vortex core. It is observed that the axial velocity profile passing through the tip vortex center is wavelike. The vorticity of the tip vortex increases rapidly near the leading edge and reaches its highest values at a short distance downstream, from which it gradually decreases. In the whole evolution, its size is growing and its center is moving away from both the suction surface and the endwall, approximately in a linear way.

scholarly journals Experimental Study on the Three Dimensional Flow Within a Compressor Cascade With Tip Clearance: Part II — The Tip Leakage Vortex

1992 ◽  
Author(s):  
Shun Kang ◽  
Ch. Hirsch
Keyword(s):  
Vortex Core ◽  
Three Dimensional ◽  
Leading Edge ◽  
Tip Clearance ◽  
Tip Vortex ◽  
Compressor Cascade ◽  
Suction Surface ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Vortex Centre

An analysis of the experimental data of a linear compressor cascade with tip clearance is presented with special attention to the development of the tip leakage vortex. A method for determining the tip vortex core size, centre position and vorticity or circulation from the measured data is proposed, based on the assumption of a circular tip vortex core. It is observed that the axial velocity profile passing through the tip vortex centre is wake-like. The vorticity of the tip vortex increases rapidly near the leading edge and reaches its highest values at a short distance downstream, from which it gradually decreases. In the whole evolution, its size is growing and its centre is moving away from both the suction surface and the endwall, approximately in a linear way.

Effect of Various Trench Designs on Axial Compressor Blade Tip Aerodynamics

2019 ◽  
Author(s):  
Ashwin Ashok ◽  
Patur Ananth Vijay Sidhartha ◽  
Shine Sivadasan
Keyword(s):  
Axial Compressor ◽  
Leading Edge ◽  
Suction Side ◽  
Horseshoe Vortex ◽  
Tip Clearance ◽  
Compressor Cascade ◽  
Tip Leakage Vortex ◽  
Stall Margin ◽  
Casing Treatment ◽  
Tip Leakage

Abstract Tip clearance of axial compressor blades allows leakage of the flow, generates significant losses and reduces the compressor efficiency. The present paper aims to discuss the axial compressor tip aerodynamics for various configurations of tip gap with trench. The various configurations are obtained by varying the clearance, trench depth, step geometry and casing contouring. In this paper the axial compressor aerodynamics for various configurations of tip gap with trench have been studied. The leakage flow structure, vorticity features and entropy generations are analyzed using RANS based CFD. The linear compressor cascade comprises of NACA 651810 blade with clearance height varied from 0.5% to 2% blade span. Trail of the tip leakage vortex and the horseshoe vortex on the blade suction side are clearly seen for the geometries with and without casing treatments near the stalling point. Since the trench side walls are similar to forward/backing steps, a step vortex is observed near the leading edge as well as trailing edge of the blade and is not seen for the geometry without the casing treatment. Even though the size of the tip leakage vortex seams to be reduces by providing a trench to the casing wall over the blade, the presence of additional vortices like the step vortex leads to comparatively higher flow losses. An increase in overall total pressure loss due to the application of casing treatment is observed. However an increase in stall margin for the geometries with casing is noted.

Analysis of Vortical Flow Field in a Propeller Fan by LDV Measurements and LES—Part I: Three-Dimensional Vortical Flow Structures

2001 ◽  
Vol 123 (4) ◽  
pp. 748-754 ◽  
Author(s):  
Choon-Man Jang ◽  
Masato Furukawa ◽  
Masahiro Inoue
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Leading Edge ◽  
Tip Vortex ◽  
Vortical Flow ◽  
Axial Fan ◽  
Suction Surface ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Edge Separation

Three-dimensional structures of the vortical flow field in a propeller fan with a shroud covering only the rear region of its rotor tip have been investigated by experimental analysis using laser Doppler velocimetry (LDV) measurements and by numerical analysis using a large eddy simulation (LES) in Part I of the present study. The propeller fan has a very complicated vortical flow field near the rotor tip compared with axial fan and compressor rotors. It is found that three vortex structures are formed near the rotor tip: the tip vortex, the leading edge separation vortex, and the tip leakage vortex. The tip vortex is so strong that it dominates the flow field near the tip. Its formation starts from the blade tip suction side near the midchord. Even at the design condition the tip vortex convects nearly in the tangential direction, thus impinging on the pressure surface of the adjacent blade. The leading edge separation vortex develops close along the tip suction surface and disappears in the rear region of the rotor passage. The tip leakage vortex is so weak that it does not affect the flow field in the rotor.

Numerical investigation of the effect of tip clearance on hydrodynamic performance of the linear jet propulsion system and vortex generation behind the rotor

2020 ◽  
pp. 095440622095249
Author(s):  
Negin Donyavizadeh ◽  
Parviz Ghadimi
Keyword(s):  
Leading Edge ◽  
Propulsion System ◽  
Tip Clearance ◽  
Tip Vortex ◽  
Hydrodynamic Performance ◽  
Vortex Generation ◽  
Tip Leakage Vortex ◽  
Jet Propulsion ◽  
Tip Leakage ◽  
Thrust And Torque

Linear Jet system which has a stator in addition to a rotor combines the best elements of two existing technologies of conventional screw propellers and water jets. In designing this propulsion system, tip clearance plays an essential role, since it causes the appearance of tip vortex that leads to a further loss in efficiency and a probability of cavitation phenomenon. Due to lack of any study in this regard, it is thus necessary to study tip clearance to find the appropriate geometry for linear jet propulsion system. In the current paper, hydrodynamic performance of linear jet propulsion system is numerically investigated. Accordingly, Ansys-CFX software is utilized and RANS unsteady equations are solved using SST turbulent model. Results of the proposed numerical model, in the form of thrust and torque coefficient as well as efficiency, are compared with available experimental data for a ducted propeller. It is concluded that most of the errors at various advance ratios for thrust and torque coefficients are less than 3% and relatively good agreement is observed. Hydrodynamic investigation involves five different sizes of tip clearance (2.5 to 10% of the rotor diameter). Simulation results indicate that thrust and torque coefficients decreases about 10% and 8% respectively, at the same advance coefficient (J) with an increase in tip clearance. Effects of tip clearance on tip-separation vortex and tip leakage vortex are also examined. At about 20% of chord length from the leading edge, separation occurs. As tip clearance size increases, the tip-leakage vortex also increases. At different advance ratios and higher tip clearance, an increase in vortex and a sudden decrease in thrust is generated by the propeller. By changing the time about 0.8 of the rotor periods, the evolution of the vortex generation behind the rotor at the tip of the blade is clearly observed.

Three Dimensional Flow in a Linear Compressor Cascade at Design Conditions

1991 ◽  
Author(s):  
Shun Kang ◽  
Ch. Hirsch
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Leading Edge ◽  
Vortex Sheet ◽  
Compressor Cascade ◽  
Suction Surface ◽  
Three Dimensional Flow ◽  
Linear Compressor ◽  
Dimensional Flow ◽  
Linear Compressor Cascade

Experimental data measured upstream, inside and downstream of a large scale linear compressor cascade with NACA 65-1810 blade profile are presented. The flow is surveyed at 15 traverse planes with 14 (in half span) × 24 (in pitch) points inside a passage, and 14 × 33 points downstream exit plane. The measurements are obtained with a small size five hole probe, and wall static pressure taps. It is observed that the three dimensional flow inside and behind the cascade is characterized, not only by the conventional aspects, such as leading edge horseshoe vortices, passage vortices, trailing edge vortex sheet and corner vortices, but also by two spiral node points, formed from the three dimensional separation lines, on suction surface, and the resulting concentrated vortices.

Influences of Tip Leakage Flows Discharged From Main and Splitter Blades on Flow Field in Transonic Centrifugal Compressor Stage

2018 ◽  
Author(s):  
Masanao Kaneko ◽  
Hoshio Tsujita
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Leading Edge ◽  
Tip Clearance ◽  
Blade Loading ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Leakage Flows ◽  
Transonic Centrifugal Compressor ◽  
Tip Leakage Flows

A transonic centrifugal compressor impeller is generally composed of the main and the splitter blades which are different in chord length. As a result, the tip leakage flows from the main and the splitter blades interact with each other and then complicate the flow field in the compressor. In this study, in order to clarify the individual influences of these leakage flows on the flow field in the transonic centrifugal compressor stage at near-choke to near-stall condition, the flows in the compressor at four conditions prescribed by the presence and the absence of the tip clearances were analyzed numerically. The computed results clarified the following noticeable phenomena. The tip clearance of the main blade induces the tip leakage vortex from the leading edge of the main blade. This vortex decreases the blade loading of the main blade to the negative value by the increase of the flow acceleration along the suction surface of the splitter blade, and consequently induces the tip leakage vortex caused by the negative blade loading of the main blade at any operating points. These phenomena decline the impeller efficiency. On the other hand, the tip clearance of the splitter blade decreases the afore mentioned acceleration by the formation of the tip leakage vortex from the leading edge of the splitter blade and the decrease of the incidence angle for the splitter blade caused by the suction of the flow into the tip clearance. These phenomena reduce the loss generated by the negative blade loading of the main blade and consequently reduce the decline of the impeller efficiency. Moreover, the tip clearances enlarge the flow separation around the diffuser inlet and then decline the diffuser performance independently of the operating points.

Sign in / Sign up

Export Citation Format

Share Document