Three-Dimensional Wake Decay Inside of a Compressor Cascade and Its Influence on the Downstream Unsteady Flow Field: Part I—Wake Decay Characteristics in the Flow Passage

1991 ◽  
Vol 113 (2) ◽  
pp. 180-189 ◽  
Author(s):  
C. Poensgen ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Turbulent Flows ◽  
Velocity Vector ◽  
Three Dimensional ◽  
Time Dependent ◽  
Major Influence ◽  
Hot Wire ◽  
Compressor Cascade ◽  
Flow Passage ◽  
Turbulent Flow Field

A measuring technique based on multisensor hot-wire anemometry has been developed to determine the unsteady three-dimensional velocity vector and the structure of turbulent flows. It has then been applied to the passage and the exit flow of an annular compressor cascade, which is periodically disturbed by the wakes of a cylinder rotor, located about 50 percent of blade chord upstream. In part I of this paper the decay of the rotor wakes will be described first without stator and secondly through a stator passage. The time-dependent turbulent flow field downstream of this stator is discussed in Part II. The rotor wakes have a major influence on the development of three-dimensional separated regions inside the compressor cascade, and this interaction will be addressed in both parts of this paper.

scholarly journals Three-Dimensional Wake Decay Inside of a Compressor Cascade and its Influence on the Downstream Unsteady Flow Field: Part I — Wake Decay Characteristics in the Flow Passage

1990 ◽  
Author(s):  
C. Poensgen ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Turbulent Flows ◽  
Velocity Vector ◽  
Three Dimensional ◽  
Time Dependent ◽  
Major Influence ◽  
Hot Wire ◽  
Compressor Cascade ◽  
Flow Passage ◽  
Turbulent Flow Field

A measuring technique based on multisensor hot-wire anemometry has been developed to determine the unsteady three-dimensional velocity vector and the structure of turbulent flows. It then has been applied to the passage and the exit flow of an annular compressor cascade, which is periodically disturbed by the wakes of a cylinder rotor, located about 50 percent of blade chord upstream. In part I of this paper the decay of the rotor wakes will be described first without stator and secondly through a stator passage. The time-dependent turbulent flow field downstream of this stator is discussed in Part II. The rotor wakes have a major influence on the development of three-dimensional separated regions inside the compressor cascade, and this interaction will be addressed in both parts of this paper.

Three-Dimensional Wake Decay Inside of a Compressor Cascade and Its Influence on the Downstream Unsteady Flow Field: Part II—Unsteady Flow Field Downstream of the Stator

1991 ◽  
Vol 113 (2) ◽  
pp. 190-197 ◽  
Author(s):  
C. Poensgen ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Turbulent Flows ◽  
Velocity Vector ◽  
Three Dimensional ◽  
Time Dependent ◽  
Major Influence ◽  
Hot Wire ◽  
Compressor Cascade ◽  
Turbulent Flow Field

A measuring technique based on multisensor hot-wire anemometry has been developed to determine the unsteady three-dimensional velocity vector and the structure of turbulent flows. It then has been applied to the passage and the exit flow of an annular compressor cascade, which is periodically disturbed by the wakes of a cylinder rotor, located about 50 percent of blade chord upstream. In Part I of this paper the decay of the rotor wakes has been described first without stator and secondly through a stator passage. The time-dependent turbulent flow field downstream of this stator is discussed in Part II of this paper. The rotor wakes have a major influence on the development of three-dimensional separated regions inside the compressor cascade, and this interaction will be addressed in both parts of the paper.

Three-Dimensional Wake Decay Inside of a Compressor Cascade and its Influence on the Downstream Unsteady Flow Field: Part II — Unsteady Flow Field Downstream of the Stator

1990 ◽  
Author(s):  
C. Poensgen ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Turbulent Flows ◽  
Velocity Vector ◽  
Three Dimensional ◽  
Time Dependent ◽  
Major Influence ◽  
Hot Wire ◽  
Compressor Cascade ◽  
Turbulent Flow Field

A measuring technique based on multi-sensor hot-wire anemometry has been developed to determine the unsteady three-dimensional velocity vector and the structure of turbulent flows. It then has been applied to the passage and the exit flow of an annular compressor cascade, which is periodically disturbed by the wakes of a cylinder rotor, located about 50 percent of blade chord upstream. In Part I of this paper the decay of the rotor wakes will be described first without stator and secondly through a stator passage. The time-dependent turbulent flow field downstream of this stator is discussed in Part II of this paper. The rotor wakes have a major influence on the development of three-dimensional separated regions inside the compressor cascade, and this interaction will be addressed in both parts of this paper.

Turbulence Measurements in the Corner Wall Jet

2014 ◽  
Author(s):  
Barrett Poole ◽  
Joseph W. Hall
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Turbulent Flow ◽  
Three Dimensional ◽  
Wall Jet ◽  
Hot Wire ◽  
Turbulence Measurements ◽  
Vertical Growth ◽  
The Mean ◽  
Turbulent Flow Field

The corner wall jet is similar to the standard three-dimensional wall jet with the exception that one half of the surface has been rotated counter-clockwise by 90 degrees. The corner wall jet investigated here is formed using a long round pipe with a Reynolds number of 159,000. Contours of the mean and turbulent flow field were measured using hot-wire anemometry. The results indicate that the ratio of lateral to vertical growth in the corner wall jet is approximately half of that in a standard turbulent three-dimensional wall jet.

Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part I — Quasi-Steady Flow Field and Comparison With Steady-State Data

1989 ◽  
Author(s):  
H. D. Schulz ◽  
H. E. Gallus ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Separation Bubble ◽  
Three Dimensional ◽  
Separated Flow ◽  
Major Influence ◽  
Compressor Cascade ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Corner Flow ◽  
Rotor Stator Interaction

An experimental study of three-dimensional flow field in an annular compressor cascade with an upstream rotor has been carried out at four different incidences to the stator blade. Blade boundary layers and the three-dimensional flow field at the exit are surveyed using a hot wire sensor and a five hole probe, respectively. The data on the blade boundary layer, passage flow and separated corner flow is presented. The upstream rotor wake has a major influence on the transition, laminar separation bubble, extent of wall/corner flow separation, aerodynamic losses, secondary flow and three-dimensional flow inside the passage. Detailed interpretation of the effects of upstream wakes on the entire passage flow is presented and compared with the data in the absence of a rotor.

Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part 1—Quasi-Steady Flow Field and Comparison With Steady-State Data

1990 ◽  
Vol 112 (4) ◽  
pp. 669-678 ◽  
Author(s):  
H. D. Schulz ◽  
H. E. Gallus ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Separation Bubble ◽  
Three Dimensional ◽  
Separated Flow ◽  
Major Influence ◽  
Compressor Cascade ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Corner Flow ◽  
Rotor Stator Interaction

An experimental study of three-dimensional flow field in an annular compressor cascade with an upstream rotor has been carried out at four different incidences to the stator blade. Blade boundary layers and the three-dimensional flow field at the exit are surveyed using a hot-wire sensor and a five-hole probe, respectively. The data on the blade boundary layer, passage flow, and separated corner flow are presented. The upstream rotor wake has a major influence on the transition, laminar separation bubble, extent of wall/corner flow separation, aerodynamic losses, secondary flow, and three-dimensional flow inside the passage. A detailed interpretation of the effects of upstream wakes on the entire passage flow is presented and compared with the data in the absence of a rotor.

Turbulence Measurements in a Corner Wall Jet1

2016 ◽  
Vol 138 (8) ◽  
Author(s):  
Barrett Poole ◽  
Joseph W. Hall
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Turbulent Flow ◽  
Three Dimensional ◽  
Numerical Code ◽  
Wall Jet ◽  
Hot Wire ◽  
Practical Applications ◽  
The Mean ◽  
Turbulent Flow Field

The corner wall jet is similar to the standard three-dimensional wall jet with the exception that one-half of the surface has been rotated counterclockwise by 90 deg. The corner wall jet is selected for study as the geometry occurs in practical applications and is an ideal benchmark case for numerical code validation. The corner wall jet investigated here is formed using a long round pipe with a Reynolds number of 159,000. Contours of the mean and turbulent flow field were measured using hot-wire anemometry from x/D = 0 to 40. The results indicate that the ratio of lateral-to-vertical growth in the corner wall jet is approximately half that in a standard turbulent three-dimensional wall jet. The results indicate that this behavior is not simply tied to a slower development of the corner wall jet.

Numerical simulations and analysis of the turbulent flow field in a practical gas turbine engine combustor

2021 ◽  
pp. 095765092110632
Author(s):  
Veeraraghava R Hasti ◽  
Prithwish Kundu ◽  
Sibendu Som ◽  
Jay P Gore
Keyword(s):  
Flow Field ◽  
Turbulent Flow ◽  
Numerical Simulations ◽  
Gas Turbine ◽  
Adaptive Mesh Refinement ◽  
Three Dimensional ◽  
Adaptive Mesh ◽  
Turbulent Structures ◽  
Cut Cell ◽  
Turbulent Flow Field

The turbulent flow field in a practical gas turbine combustor is very complex because of the interactions between various flows resulting from components like multiple types of swirlers, dilution holes, and liner effusion cooling holes. Numerical simulations of flows in such complex combustor configurations are challenging. The challenges result from (a) the complexities of the interfaces between multiple three-dimensional shear layers, (b) the need for proper treatment of a large number of tiny effusion holes with multiple angles, and (c) the requirements for fast turnaround times in support of engineering design optimization. Both the Reynolds averaged Navier–Stokes simulation (RANS) and the large eddy simulation (LES) for the practical combustor geometry are considered. An autonomous meshing using the cut-cell Cartesian method and adaptive mesh refinement (AMR) is demonstrated for the first time to simulate the flow in a practical combustor geometry. The numerical studies include a set of computations of flows under a prescribed pressure drop across the passage of interest and another set of computations with all passages open with a specified total flow rate at the plenum inlet and the pressure at the exit. For both sets, the results of the RANS and the LES flow computations agree with each other and with the corresponding measurements. The results from the high-resolution LES simulations are utilized to gain fundamental insights into the complex turbulent flow field by examining the profiles of the velocity, the vorticity, and the turbulent kinetic energy. The dynamics of the turbulent structures are well captured in the results of the LES simulations.

Effects of Stator Wakes and Spanwise Nonuniform Inlet Conditions on the Rotor Flow of an Axial Turbine Stage

1993 ◽  
Vol 115 (1) ◽  
pp. 128-136 ◽  
Author(s):  
J. Zeschky ◽  
H. E. Gallus
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Axial Flow ◽  
Tip Clearance ◽  
Hot Wire ◽  
Turbine Stage ◽  
Static Pressure Distribution ◽  
Inlet Conditions ◽  
Experimental Values ◽  
Rotor Flow

Detailed measurements have been performed in a subsonic, axial-flow turbine stage to investigate the structure of the secondary flow field and the loss generation. The data include the static pressure distribution on the rotor blade passage surfaces and radial-circumferential measurements of the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The flow field at the rotor outlet is derived from unsteady hot-wire measurements with high temporal and spatial resolution. The paper presents the formation of the tip clearance vortex and the passage vortices, which are strongly influenced by the spanwise nonuniform stator outlet flow. Taking the experimental values for the unsteady flow velocities and turbulence properties, the effect of the periodic stator wakes on the rotor flow is discussed.

Sign in / Sign up

Export Citation Format

Share Document