Natural Convection Heat Transfer From a Plate in a Semicircular Enclosure

1992 ◽  
Vol 114 (1) ◽  
pp. 121-126 ◽  
Author(s):  
G. A. Moore ◽  
K. G. T. Hollands
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Plate Thickness ◽  
Fluid Motion ◽  
Convection Heat Transfer ◽  
Bulk Fluid ◽  
Number Range ◽  
Balance Technique ◽  
Conductive Component

In the subject geometry, a long thin plate at uniform temperature is contained coaxially and symmetrically in a long semicircular trough closed at the top and having a uniform but different temperature. Heat flows across the air-filled region between the two by both natural convection and gaseous conduction. The problem of characterizing the free convective component of this heat transfer—that is, the component caused by bulk fluid motion—is treated experimentally by using a heat balance technique, with the measurements being repeated at different pressures, in order to cover a wide Rayleigh number range, from Ra ≈ 10 to Ra ≈ 108. Nusselt number versus Rayleigh number plots are presented for each of several combinations of plate-to-trough spacing and tilt angle, and the plots are correlated by equations. The problem of characterizing the conductive component is treated by numerically solving the steady diffusion equation in the air-filled region, and the results are correlated as a function of the spacing and the plate thickness.

Experiments and Theory on Natural Convection Heat Transfer From Bodies of Complex Shape

1985 ◽  
Vol 107 (3) ◽  
pp. 624-629 ◽  
Author(s):  
M. J. Chamberlain ◽  
K. G. T. Hollands ◽  
G. D. Raithby
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Complex Shape ◽  
Convection Heat Transfer ◽  
Average Error ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Transient Method ◽  
Number Range

Measurements of the heat transfer by natural convection from isothermal bodies to air are reported and compared to the predictions of the method proposed by Raithby and Hollands [7, 8]. The bodies tested were the cube in various orientations and a body consisting of two touching spheres (a bisphere). The experimental Rayleigh number range extended from 10 to 107. The experimental method incorporated measuring the heat transfer by the transient method and varying the Rayleigh number by varying the pressure. The predictions agreed with the measurements to within an average error of about 3 percent. The results are correlated by single equations, which can be extended to fluids other than air.

Notes on Steady Natural Convection Heat Transfer by Double Diffusion From a Heated Cylinder Buried in a Saturated Porous Media

2015 ◽  
Vol 137 (7) ◽  
Author(s):  
Carlos Alberto Chaves ◽  
Wendell de Queiroz Lamas ◽  
Luiz Eduardo Nicolini do Patrocinio Nunes ◽  
Jose Rui Camargo ◽  
Francisco Jose Grandinetti
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Convection Heat Transfer ◽  
Double Diffusion ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Number Range ◽  
Heated Cylinder

This paper aims to present numerical solutions for the problem of steady natural convection heat transfer by double diffusion from a heated cylinder buried in a saturated porous media exposed to constant uniform temperature and concentration in the cylinder and in the media surface. A square finite domain 3 × 3 and acceptance criterion converged solution with an absolute error under 1 × 10−3 were considered to obtain results presented. The Patankar's power law for approaching of variables calculated T, C, and ϕ also was adopted. In order of method validation, an investigation of mesh points number as function of Ra, Le, and N was done. A finite volume scheme has been used to predict the flow, temperature, and concentration distributions at any space from a heat cylinder buried into a fluid-saturated porous medium for a bipolar coordinates system. Examples presented show that the differences in the flow distribution caused not only when Rayleigh number range is considered but also when Lewis number range is considered. Further, increase in the Rayleigh number has a significant influence in the flow distribution when the concentration distribution is considered. Steady natural convection heat transfer by double diffusion from a heated cylinder buried in a saturated porous medium is studied numerically using the finite volume method. To model fluid flow inside the porous medium, the Darcy equation is used. Numerical results are obtained in the form of streamlines, isotherms, and isoconcentrations. The Rayleigh number values range from 0 to 1000, the Lewis number values range from 0 to 100, and the buoyancy ratio number is equal to zero. Calculated values of average heat transfer rates agree reasonably well with values reported in the literature.

scholarly journals Free Convection Heat Transfer from Horizontal Cylinders

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 559
Author(s):  
Janusz T. Cieśliński ◽  
Slawomir Smolen ◽  
Dorota Sawicka
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Free Convection ◽  
Convection Heat Transfer ◽  
Horizontal Tube ◽  
Correlation Equations ◽  
Convection Heat ◽  
Number Range ◽  
Heated Cylinder ◽  
Free Convection Heat

The results of experimental investigation of free convection heat transfer in a rectangular container are presented. The ability of the commonly accepted correlation equations to reproduce present experimental data was tested as well. It was assumed that the examined geometry fulfils the requirement of no-interaction between heated cylinder and bounded surfaces. In order to check this assumption recently published correlation equations that jointly describe the dependence of the average Nusselt number on Rayleigh number and confinement ratios were examined. As a heat source served electrically heated horizontal tube immersed in an ambient fluid. Experiments were performed with pure ethylene glycol (EG), distilled water (W), and a mixture of EG and water at 50%/50% by volume. A set of empirical correlation equations for the prediction of Nu numbers for Rayleigh number range 3.6 × 104 < Ra < 9.2 × 105 or 3.6 × 105 < Raq < 14.8 × 106 and Pr number range 4.5 ≤ Pr ≤ 160 has been developed. The proposed correlation equations are based on two characteristic lengths, i.e., cylinder diameter and boundary layer length.

Influence of Cu-Water and CNT-Water Nanofluid on Natural Convection Heat Transfer in a Triangular Solar Collector

2020 ◽  
Author(s):  
Didarul Ahasan Redwan ◽  
Md. Habibur Rahman ◽  
Hasib Ahmed Prince ◽  
Emdadul Haque Chowdhury ◽  
M. Ruhul Amin
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Solar Collector ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Convection Heat

Abstract A numerical study on natural convection heat transfer in a right triangular solar collector filled with CNT-water and Cuwater nanofluids has been conducted. The inclined wall and the bottom wall of the cavity are maintained at a relatively lower temperature (Tc), and higher temperature (Th), respectively, whereas the vertical wall, is kept adiabatic. The governing non-dimensional partial differential equations are solved by using the Galerkin weighted residual finite element method. The Rayleigh number (Ra) and the solid volume-fraction of nanoparticles (ϕ) are varied in the range of 103 ≤ Ra ≤ 106, and 0 ≤ ϕ ≤ 0.1, respectively, to carry out the parametric simulations within the laminar region. Corresponding thermal and flow fields are presented via isotherms and streamlines. Variations of average Nusselt number as a function of Rayleigh number have been examined for different solid volume-fraction of nanoparticles. It has been found that the natural convection heat transfer becomes stronger with the increment of solid volume fraction and Rayleigh number, but the strength of circulation reduces with increasing nanoparticles’ concentration at low Ra. Conduction mode dominates for lower Ra up to a certain limit of 104. It is also observed that when the solid volume fraction is increased from 0 to 0.1 for a particular Rayleigh number, the average Nusselt number is increased to a great extent, but surprisingly, the rate of increment is more pronounced at lower Ra. Moreover, it is seen that Cu-water nanofluid offers slightly better performance compared to CNT-water but the difference is very little, especially at lower Ra.

Natural Convection Heat Transfer Characteristics of Flat Plate Enclosures

1979 ◽  
Vol 101 (1) ◽  
pp. 120-125 ◽  
Author(s):  
K. R. Randall ◽  
J. W. Mitchell ◽  
M. M. El-Wakil
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Aspect Ratio ◽  
Tilt Angle ◽  
Convection Heat Transfer ◽  
Transfer Coefficients ◽  
Number Range ◽  
Grashof Number ◽  
Average Heat ◽  
Plate Spacing

Heat transfer by natural convection in rectangular enclosures has been experimentally studied using interferometric techniques. The effects of Grashof number, tilt angle, and aspect ratio on both the local and average heat transfer coefficients have been determined. The Grashof number range tested was 4 × 103 to 3.1 × 105, and the aspect ratio (ratio of enclosure length to plate spacing) varied between 9 and 36. The angles of tilt of the enclosure with respect to the horizontal were 45, 60, 75 and 90 deg. Correlations are developed for both local and average Nusselt number over the range of test variables. The effect of tilt angle is found to reduce the average heat transfer by about 18 percent from the value of 45 deg to that at 90 deg. No significant effect of aspect ratio over the range tested was found. A method for characterizing the flow regimes that is based on heat transfer mechanisms is proposed.

Natural Convection Heat Transfer From a Cylinder With High Conductivity Permeable Fins

2003 ◽  
Vol 125 (2) ◽  
pp. 282-288 ◽  
Author(s):  
Bassam A/K Abu-Hijleh
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Convection Heat Transfer ◽  
High Heat ◽  
Horizontal Cylinder ◽  
High Conductivity ◽  
Transfer Rates ◽  
High Heat Transfer ◽  
Wide Range

The problem of laminar natural convection from a horizontal cylinder with multiple equally spaced high conductivity permeable fins on its outer surface was investigated numerically. The effect of several combinations of number of fins and fin height on the average Nusselt number was studied over a wide range of Rayleigh number. Permeable fins provided much higher heat transfer rates compared to the more traditional solid fins for a similar cylinder configuration. The ratio between the permeable to solid Nusselt numbers increased with Rayleigh number, number of fins, and fin height. This ratio was as high as 8.4 at Rayleigh number of 106, non-dimensional fin height of 2.0, and with 11 equally spaced fins. The use of permeable fins is very advantageous when high heat transfer rates are needed such as in today’s high power density electronic components.

scholarly journals Prediction of Natural Convection Heat Transfer Phenomena of Nanofluids in Corrugated Annulus

2020 ◽  
Author(s):  
Sattar Aljobair ◽  
Akeel Abdullah Mohammed ◽  
Israa Alesbe
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Outer Cylinder ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Convection Heat

Abstract The natural convection heat transfer and fluid flow characteristic of water based Al2O3 nano-fluids in a symmetrical and unsymmetrical corrugated annulus enclosure has been studied numerically using CFD. The inner cylinder is heated isothermally while the outer cylinder is kept constant cold temperature. The study includes eight models of corrugated annulus enclosure with constant aspect ratio of 1.5. The governing equations of fluid motion and heat transfer are solved using stream-vorticity formulation in curvilinear coordinates. The range of solid volume fractions of nanoparticles extends from PHI=0 to 0.25, and Rayleigh number varies from 104 to 107. Streamlines, isotherms, local and average Nusselt number of inner and outer cylinder has been investigated in this study. Sixty-four correlations have been deduced for the average Nusselt number for the inner and outer cylinders as a function of Rayleigh number have been deduced for eight models and five values of volume fraction of nano particles with an accuracy range 6-12 %. The results show that, the average heat transfer rate increases significantly as particle volume fraction and Rayleigh number increase. Also, increase the number of undulations in unsymmetrical annuli reduces the heat transfer rates which remain higher than that in symmetrical annuli. There is no remarkable change in isotherms contour with increase of volume fraction of nanofluid.

scholarly journals Simulation of Natural Convection Heat Transfer in a 2-D Trapezoidal Enclosure

2019 ◽  
Vol 16 (4) ◽  
pp. 7375-7390 ◽  
Author(s):  
K. Venkatadri ◽  
S. Abdul Gaffar ◽  
Ramachandra Prasad V. ◽  
B. Md. Hidayathulla Khan ◽  
O. Anwar Beg
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Vertical Wall ◽  
Convection Heat Transfer ◽  
Side Wall ◽  
Practical Applications ◽  
Wide Range ◽  
Trapezoidal Enclosure

Natural convection within trapezoidal enclosures finds significant practical applications. The natural convection flows play a prominent role in the transport of energy in energyrelated applications, in case of proper design of enclosures to achieve higher heat transfer rates. In the present study, a two-dimensional cavity with adiabatic right side wall is studied. The left side vertical wall is maintained at the constant hot temperature and the top slat wall is maintained at cold temperature. The dimensionless governing partial differential equations for vorticity-stream function are solved using the finite difference method with incremental time steps. The parametric study involves a wide range of Rayleigh number, Ra, 103 ≤ Ra ≤ 105 and Prandtl number (Pr = 0.025, 0.71 and 10). The fluid flow within the enclosure is formed with different shapes for different Pr values. The flow rate is increased by enhancing the Rayleigh number (Ra = 104 ). The numerical results are validated with previous results. The governing parameters in the present article, namely Rayleigh number and Prandtl number on flow patterns, isotherms as well as local Nusselt number are reported. 

scholarly journals Numerical Simulation of the Natural Convection with Presence of the Nanofluids in Cubical Cavity

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Mohamed Sannad ◽  
Abourida Btissam ◽  
Belarche Lahoucine
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Numerical Study ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Flow And Heat Transfer ◽  
Heating Section ◽  
The Right

This article consists of a numerical study of natural convection heat transfer in three-dimensional cavity filled with nanofluids. This configuration is heated by a partition maintained at a hot constant and uniform temperature TH. The right and left vertical walls are kept at a cold temperature TC while the rest is adiabatic. The fluid flow and heat transfer in the cavity are studied for different sets of the governing parameters, namely, the nanofluid type, the Rayleigh number Ra = 103, 104, 105, and 106, and the volume fraction Ф varying between Ф = 0 and 0.1. The obtained results show a positive effect of the volume fraction and the Rayleigh number on the heat transfer improvement. The analysis of the results related to the heat transfer shows that the copper-based nanofluid guarantees the best thermal transfer. In addition, the increase of the heating section size and Ra leads to an increased amount of heat. Similarly, increasing the volume fraction improves the intensification of the flow and increases the heat exchange.

Sign in / Sign up

Export Citation Format

Share Document