Mixing Flow Characteristics in a Vessel Agitated by the Screw Impeller With a Draught Tube

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
Yeng-Yung Tsui ◽  
Yu-Chang Hu
Keyword(s):  
Stokes Equations ◽  
Flow Characteristics ◽  
Computational Procedure ◽  
Navier Stokes ◽  
Complex Flow ◽  
Navier Stokes Equations ◽  
Mixing Energy ◽  
Draught Tube ◽  
Flow Mechanisms ◽  
Entire Flow

The circulating flow in a vessel induced by rotating impellers has drawn a lot of interests in industries for mixing different fluids. It used to rely on experiments to correlate the performance with system parameters because of the theoretical difficulty to analyze such a complex flow. The recent development of computational methods makes it possible to obtain the entire flow field via solving the Navier–Stokes equations. In this study, a computational procedure, based on multiple frames of reference and unstructured grid methodology, was used to investigate the flow in a vessel stirred by a screw impeller rotating in a draught tube. The performance of the mixer was characterized by circulation number, power number, and nondimensionalized mixing energy. The effects on these dimensionless parameters were examined by varying the settings of tank diameter, shaft diameter, screw pitch, and the clearance between the impeller and the draught tube. Also investigated was the flow system without the draught tube. The flow mechanisms to cause these effects were delineated in detail.

scholarly journals Propagation of Solitary Waves over a Submerged Slotted Barrier

2020 ◽  
Vol 8 (6) ◽  
pp. 419 ◽  
Author(s):  
Yun-Ta Wu ◽  
Shih-Chun Hsiao
Keyword(s):  
Flow Pattern ◽  
Solitary Waves ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Model Data ◽  
Free Surface Elevation ◽  
Complex Flow ◽  
Laboratory Observation ◽  
Navier Stokes Equations

In this article, the interaction of solitary waves and a submerged slotted barrier is investigated in which the slotted barrier consists of three impermeable elements and its porosity can be determined by the distance between the two neighboring elements. A new experiment is conducted to measure free surface elevation, velocity, and turbulent kinetic energy. Numerical simulation is performed using a two-dimensional model based on the Reynolds-Averaged Navier-Stokes equations and the non-linear k-ɛ turbulence model. A detailed flow pattern is illustrated by a flow visualization technique. A laboratory observation indicates that flow separations occur at each element of the slotted barrier and the vortex shedding process is then triggered due to the complicated interaction of those induced vortices that further create a complex flow pattern. During the vortex shedding process, seeding particles that are initially accumulated near the seafloor are suspended by an upward jet formed by vortices interacting. Model-data comparisons are carried out to examine the accuracy of the model. Overall model-data comparisons are in satisfactory agreement, but modeled results sometimes fail to predict the positions of the induced vortices. Since the measured data is unique in terms of velocity and turbulence, the dataset can be used for further improvement of numerical modeling.

Numerical simulation of the stalled flow within a vaned centrifugal pump

2004 ◽  
Vol 218 (4) ◽  
pp. 425-435 ◽  
Author(s):  
K M Guleren ◽  
A Pinarbasi
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
High Speed ◽  
Stokes Equations ◽  
Reverse Flow ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Navier Stokes Equations ◽  
Low Pass

The main goal of the present work is to analyse the numerical simulation of a centrifugal pump by solving Navier-Stokes equations, coupled with the ‘standard k-∊’ turbulence model. The pump consists of an impeller having five curved blades with nine diffuser vanes. The shaft rotates at 890r/min. Flow characteristics are assumed to be stalled in the appropriate region of flowrate levels of 1.31-2.861/s. Numerical analysis techniques are performed on a commercial FLUENT package program assuming steady, incompressible flow conditions with decreasing flowrate. Under stall conditions the flow in the diffuser passage alternates between outward jetting when the low-pass-filtered pressure is high to a reverse flow when the filtered pressure is low. Being below design conditions, there is a consistent high-speed leakage flow in the gap between the impeller and the diffuser from the exit side of the diffuser to the beginning of the volute. Separation of this leakage flow from the diffuser vane causes the onset of stall. As the flowrate decreases both the magnitude of the leakage within the vaneless part of the pump and reverse flow within a stalled diffuser passage increase. As this occurs, the stall-cell size extends from one to two diffuser passages. Comparisons are made with experimental data and show good agreement.

Effect of a Time-Dependent Stenosis on Flow Through a Tube

1968 ◽  
Vol 90 (2) ◽  
pp. 248-254 ◽  
Author(s):  
D. F. Young
Keyword(s):  
Stokes Equations ◽  
Flow Characteristics ◽  
Time Dependent ◽  
Arterial System ◽  
Navier Stokes ◽  
Axially Symmetric ◽  
Navier Stokes Equations ◽  
Flow Through ◽  
Dependent Growth ◽  
Abnormal Tissue

A common occurrence in the arterial system is the narrowing of arteries due to the development of atherosclerotic plaques or other types of abnormal tissue development. As these growths project into the lumen of the artery, the flow is disturbed and there develops a potential coupling between the growth and the blood flow through the artery. A discussion of the various possible consequences of this interaction is given. It is noted that very small growths leading to mild stenotic obstructions, although not altering the gross flow characteristics significantly, may be important in triggering biological mechanisms such as intimal cell proliferation or changes in vessel caliber. An analysis of the effect of an axially symmetric, time-dependent growth into the lumen of a tube of constant cross section through which a Newtonian fluid is steadily flowing is presented. This analysis is based on a simplified model in which the convective acceleration terms in the Navier-Stokes equations are neglected. Effect of growth on pressure distribution and wall shearing stress is given and possible biological implications are discussed.

Numerical Study of Wave Slamming on an Oscillating Flap

2014 ◽  
Author(s):  
Yanji Wei ◽  
Alan Henry ◽  
Olivier Kimmoun ◽  
Frederic Dias
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Ocean Waves ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Numerical Studies ◽  
Wave Slamming ◽  
Volume Method

Bottom hinged Oscillating Wave Surge Converters (OWSCs) are efficient devices for extracting power from ocean waves. There is limited knowledge about wave slamming on such devices. This paper deals with numerical studies of wave slamming on an oscillating flap to investigate the mechanism of slamming events. In our model, the Navier–Stokes equations are discretized using the Finite Volume method with the Volume of Fluid (VOF) approach for interface capturing. Waves are generated by a flap-type wave maker in the numerical wave tank, and the dynamic mesh method is applied to model the motion of the oscillating flap. Basic mesh and time step refinement studies are performed. The flow characteristics in a slamming event are analysed based on numerical results. Various simulations with different flap densities, water depths and wave amplitudes are performed for a better understanding of the slamming.

The Effect of Blade Lean, Twist and Bow on the Performance of Axial Turbine at Design Point

2011 ◽  
Author(s):  
Hadi Karrabi ◽  
Mohsen Rezasoltani
Keyword(s):  
Stokes Equations ◽  
Numerical Data ◽  
Navier Stokes ◽  
Minor Effect ◽  
Complex Flow ◽  
Navier Stokes Equations ◽  
Axial Turbine ◽  
Twisted Blade ◽  
The Impact ◽  
Good Agreement

An investigation to understand the impact of twisted, leaned and bowed blades on the performance of axial turbine was undertaken. A CFD code, which solves the Reynolds-averaged Navier–Stokes equations, was used to compute the complex flow field of axial turbine. The code was validated against existing Hannover turbine experimental data. Numerical data showed good agreement with measured data. Finally, the effect of geometry changes, focusing on blade lean, twist and bow, on the Avon turbine blade performance, was analyzed. Results show that twisted blade affects performance significantly. Leaned and bowed blade has minor effect on performance.

scholarly journals Effect of Impeller Parameters on the Flow inside the Centrifugal Blower using CFD

2020 ◽  
Vol 8 (6) ◽  
pp. 3977-3980
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Control Volume ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Computational Domain ◽  
Centrifugal Blower ◽  
Impeller Blade ◽  
Navier Stokes Equations

A numerical analysis is carried out to understand the flow characteristics for different impeller configurations of a single stage centrifugal blower. The volute design is based on constant velocity method. Four different impeller configurations are selected for the analysis. Impeller blade geometry is created with point by point method. Numerical simulation is carried out by CFD software GAMBIT 2.4.6 and FLUENT 6.3.26. GAMBIT work includes geometry definition and grid generation of computational domain. This process includes selection of grid types, grid refinements and defining correct boundary conditions. Processing work is carried out in FLUENT. The viscous Navier-Stokes equations are solved with control volume approach and the k-ε turbulence model. In this three dimensional numerical analysis is carried out with steady flow approach. The rotor and stator interaction is solved by mixing plane approach. Results of simulation are presented in terms of flow parameters, at impeller outlet and various angular positions inside the volute. Also, the contours of flow properties are presented at the outlet plane of fluid domain. Results suggest that for the same configurations of centrifugal blower, as we change geometrical parameter of impeller the flow inside the blower get affected.

scholarly journals Improved theory for shock waves using the OBurnett equations

2021 ◽  
Vol 929 ◽  
Author(s):  
Ravi Sudam Jadhav ◽  
Abhimanyu Gavasane ◽  
Amit Agrawal
Keyword(s):  
Shock Waves ◽  
Stokes Equations ◽  
Direct Simulation Monte Carlo ◽  
Space Velocity ◽  
Navier Stokes ◽  
Wave Flow ◽  
Complex Flow ◽  
Navier Stokes Equations ◽  
Wide Range ◽  
Mach Numbers

The main goal of the present study is to thoroughly test the recently derived OBurnett equations for the normal shock wave flow problem for a wide range of Mach number ( $3 \leq Ma \leq 9$ ). A dilute gas system composed of hard-sphere molecules is considered and the numerical results of the OBurnett equations are validated against in-house results from the direct simulation Monte Carlo method. The primary focus is to study the orbital structures in the phase space (velocity–temperature plane) and the variation of hydrodynamic fields across the shock. From the orbital structures, we observe that the heteroclinic trajectory exists for the OBurnett equations for all the Mach numbers considered, unlike the conventional Burnett equations. The thermodynamic consistency of the equations is also established by showing positive entropy generation across the shock. Further, the equations give smooth shock structures at all Mach numbers and significantly improve upon the results of the Navier–Stokes equations. With no tweaking of the equations in any way, the present work makes two important contributions by putting forward an improved theory of shock waves and establishing the validity of the OBurnett equations for solving complex flow problems.

Viscous Flow Computations for Compressor/Combustor Diffuser Design to Allow Air Extraction for IGCC Systems

1991 ◽  
Author(s):  
Ajay K. Agrawal ◽  
Tah-Teh Yang
Keyword(s):  
Coal Gasification ◽  
Stokes Equations ◽  
Outer Wall ◽  
Computational Procedure ◽  
Navier Stokes ◽  
Structural Constraints ◽  
Navier Stokes Equations ◽  
Annular Diffuser ◽  
High Reynolds ◽  
Suction Slot

A computational procedure based on the solution of fully elliptic Navier-Stokes equations on a body-fitted non-orthogonal grid was used to obtain flow fields in annular diffusers with a suction slot at the inner and outer walls. The turbulence effects were simulated by high Reynolds number form of the k-ε model. The calculation method was used to modify an industrial gas turbine (GE MS · 7001F) compressor/combustor annular diffuser to allow extraction of compressed airflow for coal gasification in simplified IGCC Systems. The air for gasification was extracted through a suction slot on the outer wall of the diffuser which was curved to improve the overall performance and to avoid flow separation; both of these insured by providing accelerated flow through the suction slot and nearly constant wall pressure downstream of the slot. Suction slot and outer wall geometries to result in the above conditions were determined by a trial and error procedure. The diffuser’s performance was further improved by extracting 6% of the compressed air through a slot at the inner wall, kept straight due to structural constraints. The resulting diffuser arrangement was relatively insensitive to the upstream disturbances.

scholarly journals Prediction of By-Pass Transition by Means of a Turbulence Weighting Factor: Part I — Theory and Validation

1999 ◽  
Author(s):  
J. Steelant ◽  
E. Dick
Keyword(s):  
Transport Equation ◽  
Stokes Equations ◽  
Flow Characteristics ◽  
Weighting Factor ◽  
Navier Stokes ◽  
Freestream Turbulence ◽  
Transitional Layer ◽  
Turbulent Spots ◽  
Navier Stokes Equations ◽  
Intermittency Factor

The classical intermittency factor γ for quantifying transition is redefined and extended to enable the modelling of by-pass transition. Therefore, a new parameter, the turbulence weighting factor τ, is introduced to cover both the physics of freestream turbulence diffusion and of turbulent spots. A transport equation is presented for the τ-factor including convective, diffusive, production and sink terms. In combination with the conditioned Navier-Stokes equations, this leads to improvements in the calculation of flow characteristics in both the transitional layer and the freestream.

Numerical Study on the Flow Characteristics of the Francis Turbine With Various Blade Profiles

2013 ◽  
Author(s):  
J.-H. Jeon ◽  
S.-S. Byeon ◽  
Y.-J. Kim
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Francis Turbine ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Ansys Cfx ◽  
Commercial Code ◽  
Sst Turbulence Model

The Francis turbine is a kind of reaction turbines, which means that the potential energy of water converted to rotational kinetic energy. In this study, the flow characteristics have been investigated numerically in a Francis turbine on the 15 MW hydropower generation with various blade profiles (NACA 65 and NACA 16 series) and discharge angles (14°, 15°, 17°, and 18°), using the commercial code, ANSYS CFX. The k-ω SST turbulence model is employed in the Reynolds averaged Navier-Stokes equations. The computing domain includes the spiral casing, guide vanes, and draft tube, which are discretized with a full three-dimensional mesh system of unstructured tetrahedral shapes. The results showed that the change of blade profiles and discharge angles significantly influenced the performance of the Francis turbine.

Sign in / Sign up

Export Citation Format

Share Document