On Axisymmetric Residual Stresses in Tubes With Longitudinally Nonuniform Stress Distribution

1993 ◽  
Vol 60 (2) ◽  
pp. 300-309 ◽  
Author(s):  
T. Nishimura
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Stress Distribution ◽  
Residual Stresses ◽  
Diffraction Method ◽  
Residual Stress Distribution ◽  
New Method ◽  
Element Analysis ◽  
Simple Modification ◽  
X Ray

New equations for calculating residual stress distribution are derived from the theory of elasticity for tubes. The initial distribution of the stresses including the shearing stress is computed from longitudinal distributions of residual stresses measured by the X-ray methods at the surface after removal of successive concentric layers of material. For example, the residual stresses of a steel tube quenched in water were measured by the X-ray diffraction method. The new method was also applied to a short tube with hypothetical residual stress distribution. An alternative finite element analysis was made for a verification. The residual stresses computed by finite element modeling agreed well with the hypothetical residual stresses measured. This shows that good results can be expected from the new method. The equations can also be used for bars by simple modification.

Residual stresses in a large circular disc caused by local heating and cooling at its centre

1971 ◽  
Vol 6 (2) ◽  
pp. 89-98 ◽  
Author(s):  
T R Gurney
Keyword(s):  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
Stress Distribution ◽  
Residual Stresses ◽  
Local Heating ◽  
Residual Stress Distribution ◽  
Element Analysis ◽  
Heating And Cooling

By means of a form of finite-element analysis and use of a theoretical, radially symmetrical, temperature distribution, the residual stresses resulting from spot heating at the centre of a large circular plate have been calculated. The investigation was concerned in particular with defining the effect of variations in material yield stress, rate of heat input, and peak temperature on the residual-stress distribution.

scholarly journals Residual Stress Distribution in Feal Weld Overlay on Steel

1994 ◽  
Vol 364 ◽  
Author(s):  
X.-L. Wang ◽  
S. Spooner ◽  
C. R. Hubbard ◽  
P. J. Maziasz ◽  
G. M. Goodwin ◽  
...  
Keyword(s):  
Experimental Data ◽  
Heat Treatment ◽  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Post Weld Heat Treatment ◽  
Residual Stress Distribution ◽  
Element Analysis ◽  
Weld Overlay

AbstractNeutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were compared with a plasto-elastic finite element analysis. While some disagreement exists in absolute strain values, there is satisfactory agreement in strain spatial distribution between the experimental data and the finite element analysis.

Measurement of Residual Stresses in a Circular Ring Using the Successive Cracking Method

1996 ◽  
Vol 118 (2) ◽  
pp. 217-223 ◽  
Author(s):  
K. J. Kang ◽  
S. Y. Seol
Keyword(s):  
Residual Stress ◽  
Stress Distribution ◽  
Residual Stresses ◽  
Circular Ring ◽  
Outer Edge ◽  
Residual Stress Distribution ◽  
Ring Specimen ◽  
Element Analysis ◽  
Theoretical Derivation ◽  
Sectioning Method

A method which we describe as the “successive cracking method” for measuring residual stresses in a circular ring is presented. In this method, the residual stresses are evaluated using a fracture mechanics approach. The strains measured at a point on the outer edge of the ring as a crack is introduced and extended from the edge are used to deduce the residual stress distribution in the uncracked ring. Finite element analysis is carried out to examine the validity of the theoretical derivation. Experiments to measure the residual stresses in a steel ring specimen are done by the successive cracking method. For comparison purposes, the experimental results using the sectioning method are presented as well. The successive cracking method is shown to be valid, simple, and effective for measuring the two-dimensional residual stress distribution in an axisymmetric member.

Modeling and Measurement of Residual Stresses along the Process Chain of Autofrettaged Components by Using FEA and Hole-Drilling Method with ESPI

2013 ◽  
Vol 768-769 ◽  
pp. 79-86 ◽  
Author(s):  
Horst Brünnet ◽  
Dirk Bähre ◽  
Theo J. Rickert ◽  
Dominik Dapprich
Keyword(s):  
Residual Stress ◽  
Stress Distribution ◽  
Residual Stresses ◽  
Speckle Pattern ◽  
Residual Stress Distribution ◽  
Electronic Speckle Pattern Interferometry ◽  
Hole Drilling ◽  
Element Analysis ◽  
Hole Drilling Method ◽  
Drilling Method

The incremental hole-drilling method is a well-known mechanical measurement procedure for the analysis of residual stresses. The newly developed PRISM® technology by Stresstech Group measures stress relaxation optically using electronic speckle pattern interferometry (ESPI). In case of autofrettaged components, the large amount of compressive residual stresses and the radius of the pressurized bores can be challenging for the measurement system. This research discusses the applicability of the measurement principle for autofrettaged cylinders made of steel AISI 4140. The residual stresses are measured after AF and after subsequent boring and reaming. The experimental residual stress depth profiles are compared to numerically acquired results from a finite element analysis (FEA) with the software code ABAQUS. Sample preparation will be considered as the parts have to be sectioned in half in order to access the measurement position. Following this, the influence of the boring and reaming operation on the final residual stress distribution as well as the accuracy of the presented measurement setup will be discussed. Finally, the usability of the FEA method in early design stages is discussed in order to predict the final residual stress distribution after AF and a following post-machining operation.

A method for the measurement of residual stresses using a fracture mechanics approach

1989 ◽  
Vol 24 (1) ◽  
pp. 23-30 ◽  
Author(s):  
K J Kang ◽  
J H Song ◽  
Y Y Earmme
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Stress Distribution ◽  
Fracture Mechanics ◽  
Residual Stresses ◽  
Residual Stress Distribution ◽  
The State ◽  
Two Dimensional ◽  
Finite Element Analyses ◽  
Simple Method

A simple method for measuring residual stresses in a plate is described. In this method residual stresses are evaluated using a fracture mechanics approach, that is, the strains or displacements measured at a point on the edge of a plate as a crack is introduced and extended from the edge are used to deduce the state of stresses that existed in the uncracked plate. Through finite element analyses and experiments this method is shown to be valid and effective for measuring the two-dimensional residual stress distribution of a welded plate.

scholarly journals Semi-Empirical Prediction of Residual Stress Profiles in Machining IN718 Alloy Using Bimodal Gaussian Curve

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3864 ◽  
Author(s):  
Dong ◽  
Peng ◽  
Cheng ◽  
Xing ◽  
Tang ◽  
...  
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Stress Distribution ◽  
Residual Stresses ◽  
Statistical Model ◽  
Gaussian Function ◽  
Cutting Parameters ◽  
Residual Stress Distribution ◽  
Stress Profiles ◽  
Semi Empirical

Residual stresses are often imposed on the end-product due to mechanical and thermal loading during the machining process, influencing the distortion and fatigue life. This paper proposed an original semi-empirical method to predict the residual stress distribution along the depth direction. In the statistical model of the method, the bimodal Gaussian function was innovatively used to fit Inconel 718 alloy residual stress profiles obtained from the finite element model, achieving a great fit precision from 89.0% to 99.6%. The coefficients of the bimodal Gaussian function were regressed with cutting parameters by the random forest algorithm. The regression precision was controlled between 80% and 85% to prevent overfitting. Experiments, compromising cylindrical turning and residual stress measurements, were conducted to modify the finite element results. The finite element results were convincing after the experiment modification, ensuring the rationality of the statistical model. It turns out that predicted residual stresses are consistent with simulations and predicted data points are within the range of error bars. The max error of predicted surface residual stress (SRS) is 113.156 MPa, while the min error is 23.047 MPa. As for the maximum compressive residual stress (MCRS), the max error is 93.025 MPa, and the min error is 22.233 MPa. Considering the large residual stress value of Inconel 718, the predicted error is acceptable. According to the semi-empirical model, the influence of cutting parameters on the residual stress distribution was investigated. It shows that the cutting speed influences circumferential and axial MCRS, circumferential and axial depth of settling significantly, and thus has the most considerable influence on the residual stress distribution. Meanwhile, the depth of cut has the least impact because it only affects axial MCRS and axial depth of settling significantly.

Residual Stresses in Butt Welding of Two Circular Pipes: An Experimental and Numerical Investigation

2014 ◽  
Author(s):  
Gurinder Singh Brar
Keyword(s):  
Finite Element Method ◽  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Finite Element Model ◽  
Welding Process ◽  
Diffraction Method ◽  
Element Model ◽  
X Ray Diffraction ◽  
X Ray

Welding is a reliable and efficient joining process in which the coalescence of metals is achieved by fusion. Welding is carried out with a very complex thermal cycle which results in irreversible elastic-plastic deformation and residual stresses in and around fusion zone and heat affected zone (HAZ). A residual stress due to welding arises from the differential heating of the plates due to the weld heat source. Residual stresses may be an advantage or disadvantage in structural components depending on their nature and magnitude. The beneficial effect of these compressive stresses have been widely used in industry as these are believed to increase fatigue strength of the component and reduce stress corrosion cracking and brittle fracture. But due to the presence of residual stresses in and around the weld zone the strength and life of the component is also reduced. To understand the behavior of residual stresses, two 10 mm thick Fe410WC mild steel plates are butt welded using the Metal Active Gas (MAG) process. An experimental method (X-ray diffraction) and numerical analysis (finite element analysis) were then carried out to calculate the residual stress values in the welded plates. Three types of V-butt weld joint — two-pass, three-pass and four-pass were considered in this study. In multi-pass welding operation the residual stress pattern developed in the material changes with each weld pass. In X-ray diffraction method, the residual stresses were derived from the elastic strain measurements using a Young’s modulus value of 210 GPa and Poisson’s ratio of 0.3. Finite element method based, SolidWorks software was used to develop coupled thermal-mechanical three dimension finite element model. The finite element model was evaluated for the transient temperatures and residual stresses during welding. Also variations of the physical and mechanical properties of material with the temperature were taken into account. The numerical results for peak transverse residual stresses attained in the welded plates for two-pass, three-pass and four-pass welded joint were 67.7 N/mm2, 58.6 N/mm2, and 48.1 N/mm2 respectively. The peak temperature attained during welding process comes out to be 970°C for two-pass weld, 820.8°C for three-pass weld and 651.9°C for four-pass weld. It can be concluded that due to increase in the number of passes during welding process or deposition weld beads, the residual stresses and temperature distribution decrease. Also, the results obtained by finite element method agree well with those from experimental X-ray diffraction method.

scholarly journals Effect of a Multiple Reduction Die on the Residual Stress of Drawn Materials

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1358
Author(s):  
Jeong-Hun Kim ◽  
Chang-Hyun Baek ◽  
Sang-Kon Lee ◽  
Jong-Hun Kang ◽  
Joon-Hong Park ◽  
...  
Keyword(s):  
Neural Network ◽  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Residual Stresses ◽  
Deep Neural Network ◽  
Drawing Process ◽  
X Ray Diffraction ◽  
Element Analysis ◽  
X Ray

Residual stress may influence the mechanical behavior and durability of drawn materials. Thus, this study develops a multiple reduction die (MRD) that can reduce residual stress during the drawing process. The MRD set consists of several die tips, die cases, and lubricating equipment. All the die tips of the MRD were disposed of simultaneously. Finite element analysis of the drawing process was performed according to the reduction ratio of each die tip, and the variables in drawing process with the MRD were optimized using a deep neural network to minimize the residual stress. Experiments on the drawing process with the conventional die and MRD were performed to evaluate the residual stress and verify the effectiveness of the MRD. The results of X-ray diffraction measurements indicated that the axial and hoop residual stresses on the surface were dramatically reduced.

Sign in / Sign up

Export Citation Format

Share Document