Update on High-Speed Milling Dynamics

1990 ◽  
Vol 112 (2) ◽  
pp. 142-149 ◽  
Author(s):  
S. Smith ◽  
J. Tlusty
Keyword(s):  
High Speed ◽  
Metal Removal ◽  
Removal Rate ◽  
Spindle Speed ◽  
Stability Lobe ◽  
Milling Operations ◽  
Force Signal ◽  
The Stability ◽  
Milling Dynamics ◽  
Selection Of

As spindle speeds and power have increased, the possibility of using the stability lobe phenomena to substantially increase the metal removal rate has become more attractive, and selection of optimum spindle speeds has become an important consideration. It is shown that, for many milling operations, it is desirable to set the tooth frequency equal to the natural frequency. At this spindle speed, the development of resonant forced vibration is actually inhibited by regeneration of waviness. An algorithm is presented for automatically selecting the optimum spindle speed based on the cutting force signal.

Chatter Vibration Modeling in High Speed Milling Operations

2008 ◽  
Author(s):  
Giuseppe Catania ◽  
Nicolo` Mancinelli
Keyword(s):  
High Speed ◽  
Removal Rate ◽  
Lumped Parameter Model ◽  
Beam Shape ◽  
Stability Lobe ◽  
Milling Operations ◽  
Excited Vibration ◽  
Cutting Force Components ◽  
The Stability ◽  
High Removal Rate

High removal rate in milling operations can be limited by chatter occurrence. Several studies on this self-excited vibration can be found in the literature: simple models (1 or 2 dofs) are proposed, i.e. a lumped parameter model of the milling machine being excited by regenerative, time-varying cutting forces. In this study, the machine tool spindle was modeled by a discrete modal approach, based on the continuous beam shape, analytical eigenfunctions, while the eigenvalues were mainly experimentally identified. The regenerative cutting force components lend to a set of Delay Differential Equations (DDEs) with periodic coefficients; DDEs were numerically integrated for different machining conditions. The stability lobe chart was evaluated using the semi-discretization method. Time histories, spectra and Poincare´ maps related to the vibratory behavior of the system were numerically obtained and differences with respect to the bifurcations predicted by the simplest models known in literature are pointed out. Some different behaviors in the shape of the stability lobe charts and in the spectra of the chatter vibrations were also observed.

Avoiding Instability on the Milling of Parts with Thin Features

2006 ◽  
Vol 526 ◽  
pp. 37-42 ◽  
Author(s):  
Francisco Javier Campa ◽  
Luis Norberto López de Lacalle ◽  
S. Herranz ◽  
Aitzol Lamikiz ◽  
A. Rivero
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Test Device ◽  
High Speed Milling ◽  
Thin Walls ◽  
Chatter Vibrations ◽  
The Stability ◽  
Selection Of

In this paper, a 3D dynamic model for the prediction of the stability lobes of high speed milling is presented, considering the combined flexibility of both tool and workpiece. The main aim is to avoid chatter vibrations on the finish milling of aeronautical parts, which include thin walls and thin floors. In this way the use of complex fixtures is eliminated. Hence, an accurate selection of both axial depth of cut and spindle speed can be accomplished. The model has been validated by means of a test device that simulates the behaviour of a thin floor.

Simultaneous Optimization of Removal Rate and Part Accuracy in High-Speed Milling

2004 ◽  
Author(s):  
Mohammad H. Kurdi ◽  
Tony L. Schmitz ◽  
Raphael T. Haftka ◽  
Brian P. Mann
Keyword(s):  
Optimization Algorithm ◽  
High Speed ◽  
Removal Rate ◽  
Spindle Speed ◽  
Successful Implementation ◽  
Location Error ◽  
High Speed Milling ◽  
Surface Location Error ◽  
Surface Location ◽  
Selection Of

High-speed milling provides an efficient method for accurate discrete part fabrication. However, successful implementation requires the selection of appropriate operating parameters. Balancing the multiple process requirements, including high material removal rate, maximum part accuracy, sufficient tool life, chatter avoidance, and adequate surface finish, to arrive at an optimum solution is difficult without the aid of an optimization framework. In this paper an initial effort is made to apply analytical tools to the selection of optimum cutting parameters (spindle speed and depth of cut are considered at this stage). Two objectives are addressed simultaneously, maximum removal rate and minimum surface location error. The Time Finite Element Analysis method is used in the optimization algorithm. Sensitivity of the surface location error to small changes in spindle speed near tooth passing frequencies that are integer fractions of the system’s natural frequency corresponding to the most flexible mode is calculated. Results of the optimization algorithm are verified by experiment.

Countermeasure Against Regenerative Chatter in End Milling Operations With Vibration Absorbers

2010 ◽  
Author(s):  
Y. Nakano ◽  
H. Takahara
Keyword(s):  
End Milling ◽  
Spindle Speed ◽  
The Self ◽  
Depth Of Cut ◽  
Vibration Absorbers ◽  
Regenerative Chatter ◽  
Stability Lobe ◽  
Milling Operations ◽  
Wide Range ◽  
The Stability

Chatter can result in the poor machined surface, tool wear and reduced product quality. Chatter is classified into the forced vibration and the self-excited vibration in perspective of the generation mechanism. It often happens that the self-excited chatter becomes problem practically because this causes heavy vibration. Regenerative chatter due to regenerative effect is one of the self-excited chatter and generated in the most cutting operations. Therefore, it is very important to quench or avoid regenerative chatter (hereafter, simply called chatter). It is well known that chatter can be avoided by selecting the optimal cutting conditions which are determined by using the stability lobe of chatter. The stability lobe of chatter represents the boundary between stable and unstable cuts as a function of spindle speed and depth of cut. However, it is difficult to predict the stability lobe of chatter perfectly because the prediction accuracy of it depends on the tool geometry, the vibration characteristics of the tool system and the machine tool and the material behavior of the workpiece. In contrast, it is made clear that the stability lobe of chatter has been elevated in the wide range of spindle speed by the vibration absorber in the turning operations. However, it should be noted that none of the previous work has actually applied the vibration absorbers to the rotating tool system in the machining center and examined the effect of the vibration absorbers on chatter in the end milling operations to the best of authors’ knowledge. In this paper, the effect of the vibration absorbers on regenerative chatter generated in the end milling operations is qualitatively evaluated by the stability analysis and the cutting test. It is made clear the relationship between the suppression effect of the vibration absorbers and the tuning parameters of them. It is shown that the greater improvement in the critical axial depth of cut is observed in the wide range of spindle speed by the properly tuned vibration absorbers.

Stability of Up-milling and Down-milling Operations with Variable Spindle Speed

2010 ◽  
Vol 16 (7-8) ◽  
pp. 1151-1168 ◽  
Author(s):  
Xinhua Long ◽  
B. Balachandran
Keyword(s):  
Spindle Speed ◽  
Depth Of Cut ◽  
Control Parameters ◽  
Infinite Dimensional ◽  
Dimensional Matrix ◽  
Finite Dimensional ◽  
Milling Operations ◽  
The Stability ◽  
Delay Differential ◽  
Milling Dynamics

In this article, a stability treatment is presented for up-milling and down-milling processes with a variable spindle speed (VSS). This speed variation is introduced by superimposing a sinusoidal modulation on a nominal spindle speed. The VSS milling dynamics is described by a set of delay differential equations with time varying periodic coefficients and a time delay. A semi-discretization scheme is used to discretize the system over one period, and the infinite-dimensional transition matrix is reduced to a finite-dimensional matrix over this period. The eigenvalues of this finite-dimensional matrix provide information on VSS milling stability with respect to control parameters, such as the axial depth of cut and the nominal spindle speed. The stability charts obtained for VSS milling operations are compared with those obtained for constant spindle speed milling operations, and the benefits of VSS milling operations are discussed.

Stability Prediction in High-Speed Milling Process Considering the Milling Force Coefficients Dependent on the Spindle Speed

2014 ◽  
Vol 13 (04) ◽  
pp. 247-255 ◽  
Author(s):  
Kunlong Wen ◽  
Houjun Qi ◽  
Gang Jin
Keyword(s):  
High Speed ◽  
Milling Process ◽  
Spindle Speed ◽  
Chatter Vibration ◽  
Milling Force ◽  
High Speed Milling ◽  
Force Coefficients ◽  
Stability Lobe ◽  
Vibration Model ◽  
The Stability

In order to further research the chatter vibration in high-speed milling, in this paper, a new regenerative chatter vibration model, considering the effect of milling force coefficients dependent on the spindle speed (MFCDSS) on the stability of high-speed milling process is proposed, and then milling stability lobe diagram is obtained, based on full-discretization method (FDM). The variable tendency of the stability of milling system is analyzed by comparisons in case of different radial immersion ratios in low-speed and high-speed milling regions, respectively. It is found that great stability predicting differences occur, especially in high-speed region when the MFCDSS is considered. This model can further supplement the theory of stability of high-speed milling process, it has certain engineering guidance significance in the selection of high-speed milling parameters.

scholarly journals Control of Chatter by Spindle Speed Variation in High-Speed Milling

2010 ◽  
Vol 112 ◽  
pp. 179-186 ◽  
Author(s):  
Sébastien Seguy ◽  
Gilles Dessein ◽  
Lionel Arnaud ◽  
Tamás Insperger
Keyword(s):  
High Speed ◽  
Spindle Speed ◽  
High Speed Milling ◽  
Speed Variation ◽  
Milling Operations ◽  
Spindle Speed Variation ◽  
Machine Tool Chatter ◽  
Parametric Studies ◽  
Sinusoidal Shape ◽  
The Stability

High-speed milling operations are often limited by regenerative vibrations. The aim of this paper is to analyze the effect of spindle speed variation on machine tool chatter in high-speed milling. The stability analysis of triangular and sinusoidal shape variations is made numerically with the semi-discretization method. Parametric studies show also the influence of the frequency and amplitude variation parameters. This modeling is validated experimentally by variable spindle speed cutting tests with a triangular shape. Stable and unstable tests are analyzed in term of amplitude vibration and surface roughness degradation. This work reveals that stability must be considered at period variation scale. It is also shown that spindle speed variation can be efficiently used to suppress chatter in the flip lobe area.

scholarly journals Optimum Selection of Variable Pitch for Chatter Suppression in Face Milling Operations

Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 112 ◽  
Author(s):  
Alex Iglesias ◽  
Zoltan Dombovari ◽  
German Gonzalez ◽  
Jokin Munoa ◽  
Gabor Stepan
Keyword(s):  
Removal Rate ◽  
Face Milling ◽  
Heavy Duty ◽  
Variable Pitch ◽  
Thin Walls ◽  
Chatter Suppression ◽  
Milling Operations ◽  
Optimum Selection ◽  
Cutting Capacity ◽  
Selection Of

Cutting capacity can be seriously limited in heavy duty face milling processes due to self-excited structural vibrations. Special geometry tools and, specifically, variable pitch milling tools have been extensively used in aeronautic applications with the purpose of removing these detrimental chatter vibrations, where high frequency chatter related to slender tools or thin walls limits productivity. However, the application of this technique in heavy duty face milling operations has not been thoroughly explored. In this paper, a method for the definition of the optimum angles between inserts is presented, based on the optimum pitch angle and the stabilizability diagrams. These diagrams are obtained through the brute force (BF) iterative method, which basically consists of an iterative maximization of the stability by using the semidiscretization method. From the observed results, hints for the selection of the optimum pitch pattern and the optimum values of the angles between inserts are presented. A practical application is implemented and the cutting performance when using an optimized variable pitch tool is assessed. It is concluded that with an optimum selection of the pitch, the material removal rate can be improved up to three times. Finally, the existence of two more different stability lobe families related to the saddle-node and flip type stability losses is demonstrated.

Stability of Milling Operations With Asymmetric Cutter Dynamics in Rotating Coordinates

2016 ◽  
Vol 138 (8) ◽  
Author(s):  
Alptunc Comak ◽  
Orkun Ozsahin ◽  
Yusuf Altintas
Keyword(s):  
Time Domain ◽  
Machine Tools ◽  
High Speed ◽  
End Mill ◽  
Spindle Shaft ◽  
Milling Operations ◽  
Stability Model ◽  
Principal Directions ◽  
The Stability ◽  
Rotating Coordinates

High-speed machine tools have parts with both stationary and rotating dynamics. While spindle housing, column, and table have stationary dynamics, rotating parts may have both symmetric (i.e., spindle shaft and tool holder) and asymmetric dynamics (i.e., two-fluted end mill) due to uneven geometry in two principal directions. This paper presents a stability model of dynamic milling operations with combined stationary and rotating dynamics. The stationary modes are superposed to two orthogonal directions in rotating frame by considering the time- and speed-dependent, periodic dynamic milling system. The stability of the system is solved in both frequency and semidiscrete time domain. It is shown that the stability pockets differ significantly when the rotating dynamics of the asymmetric tools are considered. The proposed stability model has been experimentally validated in high-speed milling of an aluminum alloy with a two-fluted, asymmetric helical end mill.

Investigation of Surface Roughness and Material Removal Rate for High Speed Micro End Milling on PMMA

2015 ◽  
Vol 1115 ◽  
pp. 12-15
Author(s):  
Nur Atiqah ◽  
Mohammad Yeakub Ali ◽  
Abdul Rahman Mohamed ◽  
Md. Sazzad Hossein Chowdhury
Keyword(s):  
Surface Roughness ◽  
Material Removal Rate ◽  
Feed Rate ◽  
Material Removal ◽  
High Speed ◽  
End Milling ◽  
Removal Rate ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Micro End Milling

Micro end milling is one of the most important micromachining process and widely used for producing miniaturized components with high accuracy and surface finish. This paper present the influence of three micro end milling process parameters; spindle speed, feed rate, and depth of cut on surface roughness (Ra) and material removal rate (MRR). The machining was performed using multi-process micro machine tools (DT-110 Mikrotools Inc., Singapore) with poly methyl methacrylate (PMMA) as the workpiece and tungsten carbide as its tool. To develop the mathematical model for the responses in high speed micro end milling machining, Taguchi design has been used to design the experiment by using the orthogonal array of three levels L18 (21×37). The developed models were used for multiple response optimizations by desirability function approach to obtain minimum Ra and maximum MRR. The optimized values of Ra and MRR were 128.24 nm, and 0.0463 mg/min, respectively obtained at spindle speed of 30000 rpm, feed rate of 2.65 mm/min, and depth of cut of 40 μm. The analysis of variance revealed that spindle speeds are the most influential parameters on Ra. The optimization of MRR is mostly influence by feed rate. Keywords:Micromilling,surfaceroughness,MRR,PMMA

Sign in / Sign up

Export Citation Format

Share Document