Thermographic Stress Analysis in Cortical Bone

1991 ◽  
Vol 113 (4) ◽  
pp. 418-422 ◽  
Author(s):  
Ray Vanderby ◽  
Sean S. Kohles
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Stress Analysis ◽  
Cortical Bone ◽  
Strain Energy ◽  
Correlation Coefficients ◽  
Thermoelastic Effect ◽  
Experimental Stress Analysis ◽  
Strain Invariant ◽  
Induced Changes

Under adiabatic (or near adiabatic) conditions a volumetric change in an elastic material will produce a corresponding change in temperature. Based upon this principle, thermographic stress analysis (TSA) measures changes in surface heat flux (which are related to changes in surface temperature) and relates them to a coupled form of strains or stresses. To demonstrate the feasibility of using this technique for biomechanical applications, we thermographically measured heat flux from loaded specimens of cortical bone and correlated the results with strain gage data. Regular parallelepipeds were cut from the cortex of bovine femora and loaded sinusoidally at 20 Hz. At this rate of loading, mechanically induced changes in surface temperature could be sampled (via heat flux) prior to a measureable attenuation of the thermoelastic effect. Correlation coefficients demonstrated a significant linear relationship between TSA and measured and computed mechanical parameters (stress, strain, first strain invariant, and strain energy density). TSA therefore appears to be a promising technology for experimental stress analysis in cortical bone.

scholarly journals Coupling Ocean Currents and Waves with Wind Stress over the Gulf Stream

2019 ◽  
Vol 11 (12) ◽  
pp. 1476 ◽  
Author(s):  
Qi Shi ◽  
Mark A. Bourassa
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Latent Heat Flux ◽  
Wind Stress ◽  
Gulf Stream ◽  
Satellite Observations ◽  
Sea Surface ◽  
Current Stress ◽  
Induced Changes

This study provides the first detailed analysis of oceanic and atmospheric responses to the current-stress, wave-stress, and wave-current-stress interactions around the Gulf Stream using a high-resolution three-way coupled regional modeling system. In general, our results highlight the substantial impact of coupling currents and/or waves with wind stress on the air–sea fluxes over the Gulf Stream. The stress and the curl of the stress are crucial to mixed-layer energy budgets and sea surface temperature. In the wave-current-stress coupled experiment, wind stress increased by 15% over the Gulf Stream. Alternating positive and negative bands of changes of Ekman-related vertical velocity appeared in response to the changes of the wind stress curl along the Gulf Stream, with magnitudes exceeding 0.3 m/day (the 95th percentile). The response of wind stress and its curl to the wave-current-stress coupling was not a linear combination of responses to the wave-stress coupling and the current-stress coupling because the ocean and wave induced changes in the atmosphere showed substantial feedback on the ocean. Changes of a latent heat flux in excess of 20 W/m2 and a sensible heat flux in excess of 5 W/m2 were found over the Gulf Stream in all coupled experiments. Sensitivity tests show that sea surface temperature (SST) induced difference of air–sea humidity is a major contributor to latent heat flux (LHF) change. Validation is challenging because most satellite observations lack the spatial resolution to resolve the current-induced changes in wind stress curls and heat fluxes. Scatterometer observations can be used to examine the changes in wind stress across the Gulf Stream. The conversion of model data to equivalent neutral winds is highly dependent on the physics considered in the air–sea turbulent fluxes, as well as air–sea temperature differences. This sensitivity is shown to be large enough that satellite observations of winds can be used to test the flux parameterizations in coupled models.

Application of the Thermoelastic Effect to the Stress Analysis of Structural Adhesive Connections

1995 ◽  
Author(s):  
J. P. M. Gonçalves ◽  
F. M. F. Oliveira ◽  
P. M. S. T. de Castro ◽  
A. A. Fernandes
Keyword(s):  
Stress State ◽  
Stress Analysis ◽  
The Body ◽  
Experimental Stress ◽  
Thermoelastic Effect ◽  
Experimental Stress Analysis ◽  
Lap Shear ◽  
Analysis Technique ◽  
Structural Applications ◽  
Adhesive Connections

Abstract The experimental stress analysis technique using the thermoelastic effect is quite recent. Besides being a non-contact method, the technique is able to produce a full field analysis. These attributes, associated with the possibility of application to structures or components in their operating environment, make the technique appealing for use in an industrial context. The thermoelastic effect is the change in temperature arising from the change in the stress state of a solid. The stress analysis technique using this effect measures the infra-red radiation emitted from a modification in its stress state. The applicability of the relationship between change in temperature and change in the stress state, as described in the theory of thermoelasticity, requires the existence of adiabatic conditions. Thus, the body to be studied must be subjected to a cyclic loading of a frequency sufficient to ensure those conditions. Adhesives are being used increasingly in more demanding applications not only in non-load carrying situations but also in structural applications as an alternative to other joining techniques. The use of adhesives in structural applications requires understanding the global behavior of structures as well as the behavior of the adhesive connections. Stress analysis of those connections is an important step towards that goal. Lap-shear joints are a type of adhesive connections widely used in industrial applications, namely, in the aerospace and automotive industries. In this study, stress analyses of these connections were performed. The experimental stress analysis technique using the thermoelastic effect was used to determine the stress state at a surface of adhesive lap-shear joints. The results were compared with finite element analyses of the same joints.

scholarly journals Experimental Determination of the Heat Transfer Coefficient of Real Cooled Geometry Using Linear Regression Method

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 180
Author(s):  
Asif Ali ◽  
Lorenzo Cocchi ◽  
Alessio Picchi ◽  
Bruno Facchini
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Linear Regression ◽  
Surface Temperature ◽  
Transfer Coefficient ◽  
External Surface ◽  
Internal Surface ◽  
Regression Method ◽  
Thermal Transient

The scope of this work was to develop a technique based on the regression method and apply it on a real cooled geometry for measuring its internal heat transfer distribution. The proposed methodology is based upon an already available literature approach. For implementation of the methodology, the geometry is initially heated to a known steady temperature, followed by thermal transient, induced by injection of ambient air to its internal cooling system. During the thermal transient, external surface temperature of the geometry is recorded with the help of infrared camera. Then, a numerical procedure based upon a series of transient finite element analyses of the geometry is applied by using the obtained experimental data. The total test duration is divided into time steps, during which the heat flux on the internal surface is iteratively updated to target the measured external surface temperature. The final procured heat flux and internal surface temperature data of each time step is used to find the convective heat transfer coefficient via linear regression. This methodology is successfully implemented on three geometries: a circular duct, a blade with U-bend internal channel, and a cooled high pressure vane of real engine, with the help of a test rig developed at the University of Florence, Italy. The results are compared with the ones retrieved with similar approach available in the open literature, and the pros and cons of both methodologies are discussed in detail for each geometry.

scholarly journals The Dependence of Renal 68Ga[Ga]-DOTATOC Uptake on Kidney Function and Its Relevance for Peptide Receptor Radionuclide Therapy with 177Lu[Lu]-DOTATOC

Diagnostics ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1216
Author(s):  
Falk Gühne ◽  
Alexander Heinzig ◽  
Philipp Seifert ◽  
Robert Drescher ◽  
Martin Freesmeyer
Keyword(s):  
Kidney Function ◽  
Specific Binding ◽  
Correlation Coefficients ◽  
Inverse Correlation ◽  
Peptide Receptor Radionuclide Therapy ◽  
Tracer Uptake ◽  
Significant Inverse Correlation ◽  
Peptide Receptor ◽  
Pet Ct ◽  
Induced Changes

Background: In addition to its SSTR-specific binding in tumors and healthy tissues, DOTATOC analogues accumulate in kidney parenchyma. Renal tracer uptake might be a surrogate of kidney function or dysfunction. This study aimed to evaluate if kidney function can be estimated from 68Ga[Ga]-DOTATOC uptake in PET/CT and its impact on the nephrotoxicity of 177Lu[Lu]-DOTATOC PRRT. Methods: Two cohorts of patients (A: 128 diagnostic patients; B: 32 PRRT patients) were evaluated retrospectively. SUV values of the kidneys, physiologically SSTR-expressing organs and in background compartments were assessed. Kidney function was calculated as eGFR by CKD-EPI creatinine equation. Pearson’s correlation coefficients and treatment-induced changes of uptake and kidney function were assessed and compared. Results: Kidney function and renal DOTATOC uptake showed a significant inverse correlation (R2 = 0.037; p = 0.029). Evaluated models of PET/CT measurements were not able to predict kidney function sufficiently. The uptake of other organs did not depend on eGFR. While the renal uptake increased after PRRT (p < 0.001), the kidney function did not change significantly (p = 0.382). Neither low pre-therapeutic eGFR nor high pre-therapeutic kidney uptake were risk factors of PRRT-induced deterioration in kidney function. Conclusion: The relevance of kidney function for renal 68Ga[Ga]-DOTATOC uptake is limited. The nephrotoxicity of 177Lu[Lu]-DOTATOC PRRT might be low and cannot be reliably predicted by pre-therapeutic measurements.

High-output diesel engine heat transfer: Part 1 - comparison between piston heat flux and global energy balance

2021 ◽  
pp. 146808742110170
Author(s):  
Eric Gingrich ◽  
Michael Tess ◽  
Vamshi Korivi ◽  
Jaal Ghandhi
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Diesel Engine ◽  
Surface Temperature ◽  
Fast Response ◽  
Temperature Data ◽  
Start Of Injection ◽  
Local Measurements ◽  
Surface Temperature Data ◽  
High Output

High-output diesel engine heat transfer measurements are presented in this paper, which is the first of a two-part series of papers. Local piston heat transfer, based on fast-response piston surface temperature data, is compared to global engine heat transfer based on thermodynamic data. A single-cylinder research engine was operated at multiple conditions, including very high-output cases – 30 bar IMEPg and 250 bar in-cylinder pressure. A wireless telemetry system was used to acquire fast-response piston surface temperature data, from which heat flux was calculated. An interpolation and averaging procedure was developed and a method to recover the steady-state portion of the heat flux based on the in-cylinder thermodynamic state was applied. The local measurements were spatially integrated to find total heat transfer, which was found to agree well with the global thermodynamic measurements. A delayed onset of the rise of spatially averaged heat flux was observed for later start of injection timings. The dataset is internally consistent, for example, the local measurements match the global values, which makes it well suited for heat transfer correlation development; this development is pursued in the second part of this paper.

scholarly journals Operating temperatures of oil-lubricated medium-speed gears: Numerical models and experimental results

2003 ◽  
Vol 217 (2) ◽  
pp. 87-106 ◽  
Author(s):  
H Long ◽  
A A Lord ◽  
D T Gethin ◽  
B J Roylance
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Temperature ◽  
Rotational Speed ◽  
High Speed ◽  
Applied Load ◽  
Frictional Heat ◽  
Transfer Coefficients ◽  
Gear Teeth ◽  
Heat Transfer Coefficients

This paper investigates the effects of gear geometry, rotational speed and applied load, as well as lubrication conditions on surface temperature of high-speed gear teeth. The analytical approach and procedure for estimating frictional heat flux and heat transfer coefficients of gear teeth in high-speed operational conditions was developed and accounts for the effect of oil mist as a cooling medium. Numerical simulations of tooth temperature based on finite element analysis were established to investigate temperature distributions and variations over a range of applied load and rotational speed, which compared well with experimental measurements. A sensitivity analysis of surface temperature to gear configuration, frictional heat flux, heat transfer coefficients, and oil and ambient temperatures was conducted and the major parameters influencing surface temperature were evaluated.

Laminar Natural Convection About Downward Facing Heated Blunt Bodies to Liquid Metals

1976 ◽  
Vol 98 (2) ◽  
pp. 208-212 ◽  
Author(s):  
G. M. Harpole ◽  
I. Catton
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Series Expansion ◽  
Surface Heat Flux ◽  
Liquid Metals ◽  
Surface Heat ◽  
Surface Shape ◽  
Boundary Layer Equations ◽  
Stagnation Points ◽  
Shape Dependence

The laminar boundary layer equations for free convection over bodies of arbitrary shape (i.e., a three-term series expansion) and with arbitrary surface heat flux or surface temperature are solved in local Cartesian coordinates. Both two-dimensional bodies (e.g., horizontal cylinders) and axisymmetric bodies (e.g., spheres) with finite radii of curvature at their stagnation points are considered. A Blasius series expansion is applied to convert from partial to ordinary differential equations. An additional transformation removes the surface shape dependence and the surface heat flux or surface temperature dependence of the equations. A second-order-correct, finite-difference method is used to solve the resulting equations. Tables of results for low Prandtl numbers are presented, from which local Nusselt numbers can be computed.

Sign in / Sign up

Export Citation Format

Share Document