Unified Iso-Deflection Curves for Orthotropic Plates Under Lateral Pressure Pulse

1990 ◽  
Vol 57 (2) ◽  
pp. 470-472 ◽  
Author(s):  
Judah Ari-Gur ◽  
M. Jerry Kenig
Keyword(s):  
Pressure Pulse ◽  
Lateral Pressure ◽  
Orthotropic Plates

Unified Iso-Response Curves for Orthotropic Plates Under Lateral Pressure Pulse

1989 ◽  
Vol 111 (4) ◽  
pp. 246-249 ◽  
Author(s):  
J. Ari-Gur ◽  
M. J. Kenig
Keyword(s):  
Pressure Pulse ◽  
Lateral Pressure ◽  
Bending Moment ◽  
Elastic Response ◽  
Rectangular Plates ◽  
Orthotropic Plates ◽  
Response Curves ◽  
Small Deflection ◽  
Theory Of Plates ◽  
Deflection Theory

General nondimensional iso-deflection and iso-bending moment curves for the elastic response of orthotropic rectangular plates under lateral pressure pulse are presented. Similarities of loads and plate properties are employed to develop the curves, which represent the peak response for various combinations of orthotropy, density, geometry and loading. The presented curves are valid within the elastic small deflection theory of plates, and their usefulness and limitations are discussed in the paper.

Plastic Collapse of Orthotropic Plates

1982 ◽  
Vol 26 (04) ◽  
pp. 286-295
Author(s):  
John C. Christodoulides ◽  
Joao G. de Oliveira
Keyword(s):  
Limit Analysis ◽  
Lateral Pressure ◽  
Yield Criterion ◽  
Plastic Collapse ◽  
Orthotropic Plates ◽  
Perfectly Plastic ◽  
Technical Theory ◽  
Orthotropic Shells ◽  
Theory Of Shells

A yield criterion for thin orthotropic shells expressed in terms of generalized stresses is first derived. This yield criterion is based on the yield criterion proposed by Hill for anisotropic continua and it is consistent with all the assumptions usually adopted in the technical theory of shells. As an example of application of this criterion the collapse of perfectly plastic rectangular orthotropic plates subjected to a uniform lateral pressure is studied using the Theorems of Limit Analysis.

Comparison of Recovery and Recrystallization in Stainless Steel Following Plane-Wave Shock Loading and Explosive Forming

1970 ◽  
Vol 28 ◽  
pp. 428-429 ◽  
Author(s):  
J. A. Korbonski ◽  
L. E. Murr
Keyword(s):  
Stainless Steel ◽  
Shock Loading ◽  
Pressure Pulse ◽  
Shock Pressure ◽  
304 Stainless Steel ◽  
Strain Rates ◽  
Two Dimensional ◽  
Aisi 304 Stainless Steel ◽  
Aisi 304 ◽  
Explosive Forming

Comparison of recovery rates in materials deformed by a unidimensional and two dimensional strains at strain rates in excess of 104 sec.−1 was performed on AISI 304 Stainless Steel. A number of unidirectionally strained foil samples were deformed by shock waves at graduated pressure levels as described by Murr and Grace. The two dimensionally strained foil samples were obtained from radially expanded cylinders by a constant shock pressure pulse and graduated strain as described by Foitz, et al.

Scaling laws of cylindrical shells under lateral pressure

AIAA Journal ◽  
1997 ◽  
Vol 35 ◽  
pp. 1669-1671
Author(s):  
A. Tabiei ◽  
J. Sun ◽  
G. J. Simitses
Keyword(s):  
Scaling Laws ◽  
Lateral Pressure ◽  
Cylindrical Shells
Sign in / Sign up

Export Citation Format

Share Document