A Computationally Efficient Objective Function for the Evaluation of the Natural Frequency in Structural Modification and Optimization Problems

1997 ◽  
Vol 119 (4) ◽  
pp. 618-623
Author(s):  
Tien-Sheng Chang ◽  
E. B. Magrab
Keyword(s):  
Objective Function ◽  
Natural Frequency ◽  
Structural Modification ◽  
Optimization Problems ◽  
Computationally Efficient ◽  
Original Design ◽  
Additional Advantage ◽  
Cpu Time ◽  
Design Changes ◽  
Modification Technique

A highly computationally efficient objective function for measuring the change in the natural frequency when a structure is modified is introduced. When the optimization of an orthotropic plate is studied, a decrease in CPU time by at least a factor of 40 is obtained when the new objective function is compared to that derived from the minor structural modification technique. The greater the number of finite elements affected by the design changes the higher the factor of improvement will be. This new objective function has the additional advantage that it can be used for substantial modifications to the original design.

scholarly journals Modified Firefly Algorithm

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Surafel Luleseged Tilahun ◽  
Hong Choon Ong
Keyword(s):  
Objective Function ◽  
Firefly Algorithm ◽  
Optimization Problems ◽  
Metaheuristic Algorithms ◽  
Current Position ◽  
Random Movement ◽  
Cpu Time ◽  
Modified Firefly Algorithm ◽  
Better Than

Firefly algorithm is one of the new metaheuristic algorithms for optimization problems. The algorithm is inspired by the flashing behavior of fireflies. In the algorithm, randomly generated solutions will be considered as fireflies, and brightness is assigned depending on their performance on the objective function. One of the rules used to construct the algorithm is, a firefly will be attracted to a brighter firefly, and if there is no brighter firefly, it will move randomly. In this paper we modify this random movement of the brighter firefly by generating random directions in order to determine the best direction in which the brightness increases. If such a direction is not generated, it will remain in its current position. Furthermore the assignment of attractiveness is modified in such a way that the effect of the objective function is magnified. From the simulation result it is shown that the modified firefly algorithm performs better than the standard one in finding the best solution with smaller CPU time.

Scalable Computing Architecture for Time-Dependent Transportation Optimization Problems Based on High-Performance Computing Techniques

2019 ◽  
Vol 2673 (4) ◽  
pp. 205-216 ◽  
Author(s):  
Pengfei (Taylor) Li ◽  
Peirong (Slade) Wang ◽  
Farzana Chowdhury ◽  
Li Zhang
Keyword(s):  
Objective Function ◽  
High Performance Computing ◽  
High Performance ◽  
Optimization Problems ◽  
Dynamic Network ◽  
Alternative Formulation ◽  
High Fidelity ◽  
Objective Functions ◽  
Performance Computing ◽  
Transportation Optimization

Traditional formulations for transportation optimization problems mostly build complicating attributes into constraints while keeping the succinctness of objective functions. A popular solution is the Lagrangian decomposition by relaxing complicating constraints and then solving iteratively. Although this approach is effective for many problems, it generates intractability in other problems. To address this issue, this paper presents an alternative formulation for transportation optimization problems in which the complicating attributes of target problems are partially or entirely built into the objective function instead of into the constraints. Many mathematical complicating constraints in transportation problems can be efficiently modeled in dynamic network loading (DNL) models based on the demand–supply equilibrium, such as the various road or vehicle capacity constraints or “IF–THEN” type constraints. After “pre-building” complicating constraints into the objective functions, the objective function can be approximated well with customized high-fidelity DNL models. Three types of computing benefits can be achieved in the alternative formulation: ( a) the original problem will be kept the same; ( b) computing complexity of the new formulation may be significantly reduced because of the disappearance of hard constraints; ( c) efficiency loss on the objective function side can be mitigated via multiple high-performance computing techniques. Under this new framework, high-fidelity and problem-specific DNL models will be critical to maintain the attributes of original problems. Therefore, the authors’ recent efforts in enhancing the DNL’s fidelity and computing efficiency are also described in the second part of this paper. Finally, a demonstration case study is conducted to validate the new approach.

scholarly journals Global optimization based on active preference learning with radial basis functions

2020 ◽  
Author(s):  
Alberto Bemporad ◽  
Dario Piga
Keyword(s):  
Global Optimization ◽  
Objective Function ◽  
Decision Maker ◽  
Optimization Problems ◽  
Global Optimum ◽  
Bayesian Optimization ◽  
Preference Learning ◽  
Global Optimizer ◽  
Radial Basis ◽  
Decision Vector

AbstractThis paper proposes a method for solving optimization problems in which the decision-maker cannot evaluate the objective function, but rather can only express a preference such as “this is better than that” between two candidate decision vectors. The algorithm described in this paper aims at reaching the global optimizer by iteratively proposing the decision maker a new comparison to make, based on actively learning a surrogate of the latent (unknown and perhaps unquantifiable) objective function from past sampled decision vectors and pairwise preferences. A radial-basis function surrogate is fit via linear or quadratic programming, satisfying if possible the preferences expressed by the decision maker on existing samples. The surrogate is used to propose a new sample of the decision vector for comparison with the current best candidate based on two possible criteria: minimize a combination of the surrogate and an inverse weighting distance function to balance between exploitation of the surrogate and exploration of the decision space, or maximize a function related to the probability that the new candidate will be preferred. Compared to active preference learning based on Bayesian optimization, we show that our approach is competitive in that, within the same number of comparisons, it usually approaches the global optimum more closely and is computationally lighter. Applications of the proposed algorithm to solve a set of benchmark global optimization problems, for multi-objective optimization, and for optimal tuning of a cost-sensitive neural network classifier for object recognition from images are described in the paper. MATLAB and a Python implementations of the algorithms described in the paper are available at http://cse.lab.imtlucca.it/~bemporad/glis.

scholarly journals Gumbel-softmax-based optimization: a simple general framework for optimization problems on graphs

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yaoxin Li ◽  
Jing Liu ◽  
Guozheng Lin ◽  
Yueyuan Hou ◽  
Muyun Mou ◽  
...  
Keyword(s):  
Objective Function ◽  
Statistical Physics ◽  
Automatic Differentiation ◽  
Optimization Problems ◽  
Vertex Cover ◽  
Independent Set ◽  
Computational Social Science ◽  
Maximization Problem ◽  
Maximum Independent Set ◽  
Gradient Descent Algorithm

AbstractIn computer science, there exist a large number of optimization problems defined on graphs, that is to find a best node state configuration or a network structure, such that the designed objective function is optimized under some constraints. However, these problems are notorious for their hardness to solve, because most of them are NP-hard or NP-complete. Although traditional general methods such as simulated annealing (SA), genetic algorithms (GA), and so forth have been devised to these hard problems, their accuracy and time consumption are not satisfying in practice. In this work, we proposed a simple, fast, and general algorithm framework based on advanced automatic differentiation technique empowered by deep learning frameworks. By introducing Gumbel-softmax technique, we can optimize the objective function directly by gradient descent algorithm regardless of the discrete nature of variables. We also introduce evolution strategy to parallel version of our algorithm. We test our algorithm on four representative optimization problems on graph including modularity optimization from network science, Sherrington–Kirkpatrick (SK) model from statistical physics, maximum independent set (MIS) and minimum vertex cover (MVC) problem from combinatorial optimization on graph, and Influence Maximization problem from computational social science. High-quality solutions can be obtained with much less time-consuming compared to the traditional approaches.

Component Rearrangement on Printed Wiring Boards to Maximize the Fundamental Natural Frequency

1993 ◽  
Vol 115 (3) ◽  
pp. 312-321 ◽  
Author(s):  
Tien-Sheng Chang ◽  
E. B. Magrab
Keyword(s):  
Simulated Annealing ◽  
Boundary Conditions ◽  
Natural Frequency ◽  
Printed Wiring Board ◽  
Computationally Efficient ◽  
Additional Increase ◽  
Simulated Annealing Method ◽  
Fundamental Natural Frequency ◽  
Rearrangement Algorithm ◽  
Annealing Method

A methodology to attain the highest fundamental natural frequency of a printed wiring board by rearranging its components has been developed. A general two-dimensional rearrangement algorithm is developed by which the rearrangement of the component-lead-board (CLB) assemblies is performed automatically for any combination of equal size, unequal size, movable and immovable CLBs. This algorithm is also capable of incorporating two design restrictions: fixed (immovable) components and prohibited (non-swappable) areas. A highly computationally efficient objective function for the evaluation of the automatic rearrangement process is introduced, which is a linear function of the size of the individual CLBs that have been selected for each interchange. The simulated annealing method is adapted to solve the combinatorial rearrangement of the CLBs. Using 61 combinations of boundary conditions, equal and unequal sized CLBs, movable and immovable CLBs, various CLB groupings and sets of material properties, it is found that, when compared to the exact solution obtained by an exhaustive search method, the simulated annealing method obtained the highest fundamental natural frequency within 1 percent for 87 percent of the cases considered, within 0.5 percent for 72 percent of the cases and the true maximum in 43 percent of them. To further increase the fundamental natural frequency the introduction of a single interior point support is analyzed. Depending on the boundary conditions an additional increase in the maximum fundamental natural frequency of 44 to 198 percent can be obtained.

Nonlinear Optimal Design of Dynamic Mechanical Systems

1992 ◽  
Author(s):  
T. E. Potter ◽  
K. D. Willmert ◽  
M. Sathyamoorthy
Keyword(s):  
Objective Function ◽  
Optimization Problems ◽  
Iteration Process ◽  
Optimization Method ◽  
Linear Constraints ◽  
Sum Of Squares ◽  
Function Evaluation ◽  
Deformation Analysis ◽  
Nonlinear Constraints ◽  
Quadratic Constraints

Abstract Mechanism path generation problems which use link deformations to improve the design lead to optimization problems involving a nonlinear sum-of-squares objective function subjected to a set of linear and nonlinear constraints. Inclusion of the deformation analysis causes the objective function evaluation to be computationally expensive. An optimization method is presented which requires relatively few objective function evaluations. The algorithm, based on the Gauss method for unconstrained problems, is developed as an extension of the Gauss constrained technique for linear constraints and revises the Gauss nonlinearly constrained method for quadratic constraints. The derivation of the algorithm, using a Lagrange multiplier approach, is based on the Kuhn-Tucker conditions so that when the iteration process terminates, these conditions are automatically satisfied. Although the technique was developed for mechanism problems, it is applicable to any optimization problem having the form of a sum of squares objective function subjected to nonlinear constraints.

scholarly journals The Median Solution of the Newsvendor Problem and Some Observations

2015 ◽  
Vol 6 (3) ◽  
pp. 55-60
Author(s):  
Pritibhushan Sinha
Keyword(s):  
Standard Deviation ◽  
Theoretical Analysis ◽  
Numerical Experiment ◽  
Objective Function ◽  
Optimization Problems ◽  
Newsvendor Problem ◽  
Expected Profit ◽  
Random Optimization ◽  
Better Than

Abstract We consider the median solution of the Newsvendor Problem. Some properties of such a solution are shown through a theoretical analysis and a numerical experiment. Sometimes, though not often, median solution may be better than solutions maximizing expected profit, or maximizing minimum possible, over distribution with the same average and standard deviation, expected profit, according to some criteria. We discuss the practical suitability of the objective function set and the solution derived, for the Newsvendor Problem, and other such random optimization problems.

scholarly journals An evolutionary-based optimization algorithm for truss sizing design

2016 ◽  
Vol 38 (4) ◽  
pp. 307-317
Author(s):  
Pham Hoang Anh
Keyword(s):  
Local Search ◽  
Objective Function ◽  
Optimization Algorithm ◽  
Optimization Problems ◽  
Optimal Solution ◽  
The Other ◽  
Truss Structures ◽  
Benchmark Problems ◽  
Discrete Variables ◽  
Objective Functions

In this paper, the optimal sizing of truss structures is solved using a novel evolutionary-based optimization algorithm. The efficiency of the proposed method lies in the combination of global search and local search, in which the global move is applied for a set of random solutions whereas the local move is performed on the other solutions in the search population. Three truss sizing benchmark problems with discrete variables are used to examine the performance of the proposed algorithm. Objective functions of the optimization problems are minimum weights of the whole truss structures and constraints are stress in members and displacement at nodes. Here, the constraints and objective function are treated separately so that both function and constraint evaluations can be saved. The results show that the new algorithm can find optimal solution effectively and it is competitive with some recent metaheuristic algorithms in terms of number of structural analyses required.

scholarly journals Fresa: A Plant Propagation Algorithm for Black-Box Single and Multiple Objective Optimization

2021 ◽  
Vol 2 (4) ◽  
Keyword(s):  
Mathematical Programming ◽  
Objective Function ◽  
Optimization Problems ◽  
Population Based ◽  
Black Box ◽  
Multiple Objective ◽  
Multiple Objective Optimization ◽  
Plant Propagation ◽  
Propagation Algorithm ◽  
Multiple Dispatch

Fresa implements a nature inspired plant propagation algorithm for the solution of single and multiple objective optimization problems. The method is population based and evolutionary. Treating the objective function as a black box, the implementation is able to solve problems exhibiting behaviour that is challenging for mathematical programming methods. Fresa is easily adapted to new problems which may benefit from bespoke representations of solutions by taking advantage of the dynamic typing and multiple dispatch capabilities of the Julia language. Further, the support for threads in Julia enables an efficient implementation on multi-core computers.

scholarly journals METHODS OF FORMULATING AND SOLVING OPTIMIZATION PROBLEMS OF CUTTING LOGS OF LARGE SIZE BY BAR-SAWING METHOD WITH CUTTING OUT ONE BAR AND FIVE PAIRS OF SIDE EDGING BOARDS WITH SUBSEQUENT SAWING LUMBER FOR EDGED BOARDS

2017 ◽  
Vol 7 (1) ◽  
pp. 137-150
Author(s):  
Агапов ◽  
Aleksandr Agapov
Keyword(s):  
Mathematical Model ◽  
Objective Function ◽  
Optimization Problem ◽  
Optimization Problems ◽  
Target Function ◽  
Cross Sectional ◽  
Optimization Task ◽  
Cutting Out ◽  
The Mathematical Model ◽  
The Relationship

For the first time the mathematical model of task optimization for this scheme of cutting logs, including the objective function and six equations of connection. The article discusses Pythagorean area of the logs. Therefore, the target function is represented as the sum of the cross-sectional areas of edging boards. Equation of the relationship represents the relationship of the diameter of the logs in the vertex end with the size of the resulting edging boards. This relationship is described through the use of the Pythagorean Theorem. Such a representation of the mathematical model of optimization task is considered a classic one. However, the solution of this mathematical model by the classic method is proved to be problematic. For the solution of the mathematical model we used the method of Lagrange multipliers. Solution algorithm to determine the optimal dimensions of the beams and side edging boards taking into account the width of cut is suggested. Using a numerical method, optimal dimensions of the beams and planks are determined, in which the objective function takes the maximum value. It turned out that with the increase of the width of the cut, thickness of the beam increases and the dimensions of the side edging boards reduce. Dimensions of the extreme side planks to increase the width of cut is reduced to a greater extent than the side boards, which are located closer to the center of the log. The algorithm for solving the optimization problem is recommended to use for calculation and preparation of sawing schedule in the design and operation of sawmill lines for timber production. When using the proposed algorithm for solving the optimization problem the output of lumber can be increased to 3-5 %.

Sign in / Sign up

Export Citation Format

Share Document